YJ/TJ Clutch Cost$
05-17-2004 | 07:14 PM
#2
Guest
Posts: n/a
Re: YJ/TJ Clutch Cost$
$600-$900 depending what is being done. $600 if you just replace the
pressure plate and throw-out bearing. After that the price climbs,
master/slave replacement, fork replacement, replace/resurface the flywheel.
--
HarryS
JAFGBR
JAFTJO
"Shamus in CO" <askme@nospam.com> wrote in message
news:1JGdnUY0iZIkqTTdRVn_iw@comcast.com...
> Anybody out there have a ballpark estimate on what the cost would be for a
> new clutch installed in a '91or newer 4.0 Wrangler?
>
> TIA,
> Shamus
>
>
pressure plate and throw-out bearing. After that the price climbs,
master/slave replacement, fork replacement, replace/resurface the flywheel.
--
HarryS
JAFGBR
JAFTJO
"Shamus in CO" <askme@nospam.com> wrote in message
news:1JGdnUY0iZIkqTTdRVn_iw@comcast.com...
> Anybody out there have a ballpark estimate on what the cost would be for a
> new clutch installed in a '91or newer 4.0 Wrangler?
>
> TIA,
> Shamus
>
>
05-17-2004 | 07:14 PM
#3
Guest
Posts: n/a
Re: YJ/TJ Clutch Cost$
$600-$900 depending what is being done. $600 if you just replace the
pressure plate and throw-out bearing. After that the price climbs,
master/slave replacement, fork replacement, replace/resurface the flywheel.
--
HarryS
JAFGBR
JAFTJO
"Shamus in CO" <askme@nospam.com> wrote in message
news:1JGdnUY0iZIkqTTdRVn_iw@comcast.com...
> Anybody out there have a ballpark estimate on what the cost would be for a
> new clutch installed in a '91or newer 4.0 Wrangler?
>
> TIA,
> Shamus
>
>
pressure plate and throw-out bearing. After that the price climbs,
master/slave replacement, fork replacement, replace/resurface the flywheel.
--
HarryS
JAFGBR
JAFTJO
"Shamus in CO" <askme@nospam.com> wrote in message
news:1JGdnUY0iZIkqTTdRVn_iw@comcast.com...
> Anybody out there have a ballpark estimate on what the cost would be for a
> new clutch installed in a '91or newer 4.0 Wrangler?
>
> TIA,
> Shamus
>
>
05-17-2004 | 07:14 PM
#4
Guest
Posts: n/a
Re: YJ/TJ Clutch Cost$
$600-$900 depending what is being done. $600 if you just replace the
pressure plate and throw-out bearing. After that the price climbs,
master/slave replacement, fork replacement, replace/resurface the flywheel.
--
HarryS
JAFGBR
JAFTJO
"Shamus in CO" <askme@nospam.com> wrote in message
news:1JGdnUY0iZIkqTTdRVn_iw@comcast.com...
> Anybody out there have a ballpark estimate on what the cost would be for a
> new clutch installed in a '91or newer 4.0 Wrangler?
>
> TIA,
> Shamus
>
>
pressure plate and throw-out bearing. After that the price climbs,
master/slave replacement, fork replacement, replace/resurface the flywheel.
--
HarryS
JAFGBR
JAFTJO
"Shamus in CO" <askme@nospam.com> wrote in message
news:1JGdnUY0iZIkqTTdRVn_iw@comcast.com...
> Anybody out there have a ballpark estimate on what the cost would be for a
> new clutch installed in a '91or newer 4.0 Wrangler?
>
> TIA,
> Shamus
>
>
05-17-2004 | 07:14 PM
#5
Guest
Posts: n/a
Re: YJ/TJ Clutch Cost$
$600-$900 depending what is being done. $600 if you just replace the
pressure plate and throw-out bearing. After that the price climbs,
master/slave replacement, fork replacement, replace/resurface the flywheel.
--
HarryS
JAFGBR
JAFTJO
"Shamus in CO" <askme@nospam.com> wrote in message
news:1JGdnUY0iZIkqTTdRVn_iw@comcast.com...
> Anybody out there have a ballpark estimate on what the cost would be for a
> new clutch installed in a '91or newer 4.0 Wrangler?
>
> TIA,
> Shamus
>
>
pressure plate and throw-out bearing. After that the price climbs,
master/slave replacement, fork replacement, replace/resurface the flywheel.
--
HarryS
JAFGBR
JAFTJO
"Shamus in CO" <askme@nospam.com> wrote in message
news:1JGdnUY0iZIkqTTdRVn_iw@comcast.com...
> Anybody out there have a ballpark estimate on what the cost would be for a
> new clutch installed in a '91or newer 4.0 Wrangler?
>
> TIA,
> Shamus
>
>
05-17-2004 | 07:32 PM
#6
Guest
Posts: n/a
Re: YJ/TJ Clutch Cost$
$500 to $800 at an independent shop, $1200 at the dealer. Actual
labor time is around 5 hours. Besure to have a new throwout
bearing installed, trueing the flywheel is a good option.
Shamus in CO wrote:
> Anybody out there have a ballpark estimate on what the cost would be for a
> new clutch installed in a '91or newer 4.0 Wrangler?
>
> TIA,
> Shamus
>
>
labor time is around 5 hours. Besure to have a new throwout
bearing installed, trueing the flywheel is a good option.
Shamus in CO wrote:
> Anybody out there have a ballpark estimate on what the cost would be for a
> new clutch installed in a '91or newer 4.0 Wrangler?
>
> TIA,
> Shamus
>
>
05-17-2004 | 07:32 PM
#7
Guest
Posts: n/a
Re: YJ/TJ Clutch Cost$
$500 to $800 at an independent shop, $1200 at the dealer. Actual
labor time is around 5 hours. Besure to have a new throwout
bearing installed, trueing the flywheel is a good option.
Shamus in CO wrote:
> Anybody out there have a ballpark estimate on what the cost would be for a
> new clutch installed in a '91or newer 4.0 Wrangler?
>
> TIA,
> Shamus
>
>
labor time is around 5 hours. Besure to have a new throwout
bearing installed, trueing the flywheel is a good option.
Shamus in CO wrote:
> Anybody out there have a ballpark estimate on what the cost would be for a
> new clutch installed in a '91or newer 4.0 Wrangler?
>
> TIA,
> Shamus
>
>
05-17-2004 | 07:32 PM
#8
Guest
Posts: n/a
Re: YJ/TJ Clutch Cost$
$500 to $800 at an independent shop, $1200 at the dealer. Actual
labor time is around 5 hours. Besure to have a new throwout
bearing installed, trueing the flywheel is a good option.
Shamus in CO wrote:
> Anybody out there have a ballpark estimate on what the cost would be for a
> new clutch installed in a '91or newer 4.0 Wrangler?
>
> TIA,
> Shamus
>
>
labor time is around 5 hours. Besure to have a new throwout
bearing installed, trueing the flywheel is a good option.
Shamus in CO wrote:
> Anybody out there have a ballpark estimate on what the cost would be for a
> new clutch installed in a '91or newer 4.0 Wrangler?
>
> TIA,
> Shamus
>
>
05-17-2004 | 07:32 PM
#9
Guest
Posts: n/a
Re: YJ/TJ Clutch Cost$
$500 to $800 at an independent shop, $1200 at the dealer. Actual
labor time is around 5 hours. Besure to have a new throwout
bearing installed, trueing the flywheel is a good option.
Shamus in CO wrote:
> Anybody out there have a ballpark estimate on what the cost would be for a
> new clutch installed in a '91or newer 4.0 Wrangler?
>
> TIA,
> Shamus
>
>
labor time is around 5 hours. Besure to have a new throwout
bearing installed, trueing the flywheel is a good option.
Shamus in CO wrote:
> Anybody out there have a ballpark estimate on what the cost would be for a
> new clutch installed in a '91or newer 4.0 Wrangler?
>
> TIA,
> Shamus
>
>
05-18-2004 | 02:22 PM
#10
Guest
Posts: n/a
Re: YJ/TJ Clutch Cost$
In article <_bmdnXIQ9u_QpDTdRVn-vg@comcast.com>,
HarryS <harry-s@NoSpam.Net> wrote:
>$600-$900 depending what is being done. $600 if you just replace the
>pressure plate and throw-out bearing. After that the price climbs,
>master/slave replacement, fork replacement, replace/resurface the flywheel.
>
>--
>HarryS
>JAFGBR
>JAFTJO
>"Shamus in CO" <askme@nospam.com> wrote in message
>news:1JGdnUY0iZIkqTTdRVn_iw@comcast.com...
>> Anybody out there have a ballpark estimate on what the cost would be for a
>> new clutch installed in a '91or newer 4.0 Wrangler?
The next logical step is to find out what tools and equipment you will need
to do this as a shade tree mechanic and invite your favorite one over your
house. This would not tie up their garage and you can learn as you go.
--
<html><form><input type crash></form></html>
nospam@zero.com Replace nospam with jetta to reply via e-mail
HarryS <harry-s@NoSpam.Net> wrote:
>$600-$900 depending what is being done. $600 if you just replace the
>pressure plate and throw-out bearing. After that the price climbs,
>master/slave replacement, fork replacement, replace/resurface the flywheel.
>
>--
>HarryS
>JAFGBR
>JAFTJO
>"Shamus in CO" <askme@nospam.com> wrote in message
>news:1JGdnUY0iZIkqTTdRVn_iw@comcast.com...
>> Anybody out there have a ballpark estimate on what the cost would be for a
>> new clutch installed in a '91or newer 4.0 Wrangler?
The next logical step is to find out what tools and equipment you will need
to do this as a shade tree mechanic and invite your favorite one over your
house. This would not tie up their garage and you can learn as you go.
--
<html><form><input type crash></form></html>
nospam@zero.com Replace nospam with jetta to reply via e-mail