|
Re: Trac - Loc
Jerry-
What engine? Carl "Jerry Bransford" <jerrypb@cox.net> wrote in message news:bDn2f.2457$MN6.573@fed1read04... > My thankfully long-gone D35c axle grenaded/self-destructed 6 weeks after > installing a locker. The axle had 33" tires on it during a slow-speed > u-turn at a light-controlled intersection when it grenaded loudly enough > to cause people a block away to look up to see what happened. I strongly > recommend you not install a locker into a D35c, no matter how carefully > you drive it. The trouble it causes is just not worth it. > > Jerry > > Carl wrote: >> Ya, I realize the risk. A lot of my friends run locked up D35's on large >> and larger tires. General rule of thumb: Drive it like its a D35. Even >> with the low-output 4cyl, I'm sure it will eventually break. >> >> Thanks for the input guys.. looks like I'll be going with a brand new >> lockright. >> >> Carl >> >> >> "Jerry Bransford" <jerrypb@cox.net> wrote in message >> news:Xrn2f.2455$MN6.950@fed1read04... >> >>>Yep but the axleshafts on your Dana 35c sure are not even close to being >>>strong enough to run a locker and 33" tires. :eek: >>> >>>Jerry >>> >>>Carl wrote: >>> >>>>Is a lockright strong enough for my 4cyl turning 33's? >>>> >>>>Carl >>>> >>>>"L.W. ("ßill") ------ III" <----------@cox.net> wrote in message >>>>news:4349FC78.1EA322B2@cox.net... >>>> >>>> >>>>>Hi Carl, >>>>> The Lock Right locker from Powertrax will slip right in place of >>>>>your spiders, but it's not very strong. The Detroit will take a bunch >>>>>of >>>>>precise tools and a junk drawer full of shims to bring her in, may be >>>>>better to let a professional take responsibility for it: >>>>>http://www.differentials.com/install.html >>>>>http://www.----------.com/dana35c/TJDana35.pdf >>>>> God Bless America, Bill O|||||||O >>>>>mailto:-------------------- http://www.----------.com/ >>>>> >>>>>Carl wrote: >>>>> >>>>> >>>>>>The one I'm looking at is in an apparently good rear end with 4.10 >>>>>>gears. >>>>>>It's located far away so I told him I just want the locker. You're >>>>>>probably >>>>>>right -you usually are- .. I think I'll just shell out the $$ for a >>>>>>new one. >>>>>> >>>>>>Is a locker difficult to install? >>>>>> >>>>>>Carl >>>> >>>> >>>> >>>-- >>>Jerry Bransford >>>PP-ASEL N6TAY >>>See the Geezer Jeep at >>>http://members.cox.net/jerrypb/ >> >> >> > > -- > Jerry Bransford > PP-ASEL N6TAY > See the Geezer Jeep at > http://members.cox.net/jerrypb/ |
Re: Trac - Loc
Jerry-
What engine? Carl "Jerry Bransford" <jerrypb@cox.net> wrote in message news:bDn2f.2457$MN6.573@fed1read04... > My thankfully long-gone D35c axle grenaded/self-destructed 6 weeks after > installing a locker. The axle had 33" tires on it during a slow-speed > u-turn at a light-controlled intersection when it grenaded loudly enough > to cause people a block away to look up to see what happened. I strongly > recommend you not install a locker into a D35c, no matter how carefully > you drive it. The trouble it causes is just not worth it. > > Jerry > > Carl wrote: >> Ya, I realize the risk. A lot of my friends run locked up D35's on large >> and larger tires. General rule of thumb: Drive it like its a D35. Even >> with the low-output 4cyl, I'm sure it will eventually break. >> >> Thanks for the input guys.. looks like I'll be going with a brand new >> lockright. >> >> Carl >> >> >> "Jerry Bransford" <jerrypb@cox.net> wrote in message >> news:Xrn2f.2455$MN6.950@fed1read04... >> >>>Yep but the axleshafts on your Dana 35c sure are not even close to being >>>strong enough to run a locker and 33" tires. :eek: >>> >>>Jerry >>> >>>Carl wrote: >>> >>>>Is a lockright strong enough for my 4cyl turning 33's? >>>> >>>>Carl >>>> >>>>"L.W. ("ßill") ------ III" <----------@cox.net> wrote in message >>>>news:4349FC78.1EA322B2@cox.net... >>>> >>>> >>>>>Hi Carl, >>>>> The Lock Right locker from Powertrax will slip right in place of >>>>>your spiders, but it's not very strong. The Detroit will take a bunch >>>>>of >>>>>precise tools and a junk drawer full of shims to bring her in, may be >>>>>better to let a professional take responsibility for it: >>>>>http://www.differentials.com/install.html >>>>>http://www.----------.com/dana35c/TJDana35.pdf >>>>> God Bless America, Bill O|||||||O >>>>>mailto:-------------------- http://www.----------.com/ >>>>> >>>>>Carl wrote: >>>>> >>>>> >>>>>>The one I'm looking at is in an apparently good rear end with 4.10 >>>>>>gears. >>>>>>It's located far away so I told him I just want the locker. You're >>>>>>probably >>>>>>right -you usually are- .. I think I'll just shell out the $$ for a >>>>>>new one. >>>>>> >>>>>>Is a locker difficult to install? >>>>>> >>>>>>Carl >>>> >>>> >>>> >>>-- >>>Jerry Bransford >>>PP-ASEL N6TAY >>>See the Geezer Jeep at >>>http://members.cox.net/jerrypb/ >> >> >> > > -- > Jerry Bransford > PP-ASEL N6TAY > See the Geezer Jeep at > http://members.cox.net/jerrypb/ |
Re: Trac - Loc
Like bill said, that looks like an open carrier taken out after putting a
detroit in, go have a look here for your prices and pictures http://completeoffroad.com/wsm/c-15_dana__35_m35.html unfortunately they don't have a pic of the dana 35 detroit, but you could look at the D 44, D 30, 9" ones etc. Good place to buy from, best I found on the net for prices, I am in Canada and saved $200.00 on my daughter's 9" detroit and $250.00 on my AMC 20 detroit. Greg "Carl" <carlsaiyed@REMOVE.hotmail.com> wrote in message news:MN2dnfQtbKP9n9feRVn-uA@comcast.com... > Wow, so he is ripping someone off? > > Carl > > "L.W. ("ßill") ------ III" <----------@cox.net> wrote in message > news:434A00A2.C6148F25@cox.net... >> Hi Carl, >> That's what I hate about EBay! What you're looking at is the Locker >> box and the old stock open differential. The Detroit will look machined >> like the one at: http://www.4x4wire.com/jeep/reviews/super35d/ >> God Bless America, Bill O|||||||O >> mailto:-------------------- http://www.----------.com/ >> >> Carl wrote: >>> >>> Bill- >>> What about this one? >>> http://cgi.ebay.com/ebaymotors/ws/eB...tem=8004904578 >>> >>> Carl > > |
Re: Trac - Loc
Like bill said, that looks like an open carrier taken out after putting a
detroit in, go have a look here for your prices and pictures http://completeoffroad.com/wsm/c-15_dana__35_m35.html unfortunately they don't have a pic of the dana 35 detroit, but you could look at the D 44, D 30, 9" ones etc. Good place to buy from, best I found on the net for prices, I am in Canada and saved $200.00 on my daughter's 9" detroit and $250.00 on my AMC 20 detroit. Greg "Carl" <carlsaiyed@REMOVE.hotmail.com> wrote in message news:MN2dnfQtbKP9n9feRVn-uA@comcast.com... > Wow, so he is ripping someone off? > > Carl > > "L.W. ("ßill") ------ III" <----------@cox.net> wrote in message > news:434A00A2.C6148F25@cox.net... >> Hi Carl, >> That's what I hate about EBay! What you're looking at is the Locker >> box and the old stock open differential. The Detroit will look machined >> like the one at: http://www.4x4wire.com/jeep/reviews/super35d/ >> God Bless America, Bill O|||||||O >> mailto:-------------------- http://www.----------.com/ >> >> Carl wrote: >>> >>> Bill- >>> What about this one? >>> http://cgi.ebay.com/ebaymotors/ws/eB...tem=8004904578 >>> >>> Carl > > |
Re: Trac - Loc
Like bill said, that looks like an open carrier taken out after putting a
detroit in, go have a look here for your prices and pictures http://completeoffroad.com/wsm/c-15_dana__35_m35.html unfortunately they don't have a pic of the dana 35 detroit, but you could look at the D 44, D 30, 9" ones etc. Good place to buy from, best I found on the net for prices, I am in Canada and saved $200.00 on my daughter's 9" detroit and $250.00 on my AMC 20 detroit. Greg "Carl" <carlsaiyed@REMOVE.hotmail.com> wrote in message news:MN2dnfQtbKP9n9feRVn-uA@comcast.com... > Wow, so he is ripping someone off? > > Carl > > "L.W. ("ßill") ------ III" <----------@cox.net> wrote in message > news:434A00A2.C6148F25@cox.net... >> Hi Carl, >> That's what I hate about EBay! What you're looking at is the Locker >> box and the old stock open differential. The Detroit will look machined >> like the one at: http://www.4x4wire.com/jeep/reviews/super35d/ >> God Bless America, Bill O|||||||O >> mailto:-------------------- http://www.----------.com/ >> >> Carl wrote: >>> >>> Bill- >>> What about this one? >>> http://cgi.ebay.com/ebaymotors/ws/eB...tem=8004904578 >>> >>> Carl > > |
Re: Trac - Loc
Does it matter? I was doing a u-turn and nearly coasting through it at
minimal power. Carl wrote: > Jerry- > What engine? > > Carl > > "Jerry Bransford" <jerrypb@cox.net> wrote in message > news:bDn2f.2457$MN6.573@fed1read04... > >>My thankfully long-gone D35c axle grenaded/self-destructed 6 weeks after >>installing a locker. The axle had 33" tires on it during a slow-speed >>u-turn at a light-controlled intersection when it grenaded loudly enough >>to cause people a block away to look up to see what happened. I strongly >>recommend you not install a locker into a D35c, no matter how carefully >>you drive it. The trouble it causes is just not worth it. >> >>Jerry >> >>Carl wrote: >> >>>Ya, I realize the risk. A lot of my friends run locked up D35's on large >>>and larger tires. General rule of thumb: Drive it like its a D35. Even >>>with the low-output 4cyl, I'm sure it will eventually break. >>> >>>Thanks for the input guys.. looks like I'll be going with a brand new >>>lockright. >>> >>>Carl >>> >>> >>>"Jerry Bransford" <jerrypb@cox.net> wrote in message >>>news:Xrn2f.2455$MN6.950@fed1read04... >>> >>> >>>>Yep but the axleshafts on your Dana 35c sure are not even close to being >>>>strong enough to run a locker and 33" tires. :eek: >>>> >>>>Jerry >>>> >>>>Carl wrote: >>>> >>>> >>>>>Is a lockright strong enough for my 4cyl turning 33's? >>>>> >>>>>Carl >>>>> >>>>>"L.W. ("ßill") ------ III" <----------@cox.net> wrote in message >>>>>news:4349FC78.1EA322B2@cox.net... >>>>> >>>>> >>>>> >>>>>>Hi Carl, >>>>>> The Lock Right locker from Powertrax will slip right in place of >>>>>>your spiders, but it's not very strong. The Detroit will take a bunch >>>>>>of >>>>>>precise tools and a junk drawer full of shims to bring her in, may be >>>>>>better to let a professional take responsibility for it: >>>>>>http://www.differentials.com/install.html >>>>>>http://www.----------.com/dana35c/TJDana35.pdf >>>>>> God Bless America, Bill O|||||||O >>>>>>mailto:-------------------- http://www.----------.com/ >>>>>> >>>>>>Carl wrote: >>>>>> >>>>>> >>>>>> >>>>>>>The one I'm looking at is in an apparently good rear end with 4.10 >>>>>>>gears. >>>>>>>It's located far away so I told him I just want the locker. You're >>>>>>>probably >>>>>>>right -you usually are- .. I think I'll just shell out the $$ for a >>>>>>>new one. >>>>>>> >>>>>>>Is a locker difficult to install? >>>>>>> >>>>>>>Carl >>>>> >>>>> >>>>> >>>>-- >>>>Jerry Bransford >>>>PP-ASEL N6TAY >>>>See the Geezer Jeep at >>>>http://members.cox.net/jerrypb/ >>> >>> >>> >>-- >>Jerry Bransford >>PP-ASEL N6TAY >>See the Geezer Jeep at >>http://members.cox.net/jerrypb/ > > > -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
Re: Trac - Loc
Does it matter? I was doing a u-turn and nearly coasting through it at
minimal power. Carl wrote: > Jerry- > What engine? > > Carl > > "Jerry Bransford" <jerrypb@cox.net> wrote in message > news:bDn2f.2457$MN6.573@fed1read04... > >>My thankfully long-gone D35c axle grenaded/self-destructed 6 weeks after >>installing a locker. The axle had 33" tires on it during a slow-speed >>u-turn at a light-controlled intersection when it grenaded loudly enough >>to cause people a block away to look up to see what happened. I strongly >>recommend you not install a locker into a D35c, no matter how carefully >>you drive it. The trouble it causes is just not worth it. >> >>Jerry >> >>Carl wrote: >> >>>Ya, I realize the risk. A lot of my friends run locked up D35's on large >>>and larger tires. General rule of thumb: Drive it like its a D35. Even >>>with the low-output 4cyl, I'm sure it will eventually break. >>> >>>Thanks for the input guys.. looks like I'll be going with a brand new >>>lockright. >>> >>>Carl >>> >>> >>>"Jerry Bransford" <jerrypb@cox.net> wrote in message >>>news:Xrn2f.2455$MN6.950@fed1read04... >>> >>> >>>>Yep but the axleshafts on your Dana 35c sure are not even close to being >>>>strong enough to run a locker and 33" tires. :eek: >>>> >>>>Jerry >>>> >>>>Carl wrote: >>>> >>>> >>>>>Is a lockright strong enough for my 4cyl turning 33's? >>>>> >>>>>Carl >>>>> >>>>>"L.W. ("ßill") ------ III" <----------@cox.net> wrote in message >>>>>news:4349FC78.1EA322B2@cox.net... >>>>> >>>>> >>>>> >>>>>>Hi Carl, >>>>>> The Lock Right locker from Powertrax will slip right in place of >>>>>>your spiders, but it's not very strong. The Detroit will take a bunch >>>>>>of >>>>>>precise tools and a junk drawer full of shims to bring her in, may be >>>>>>better to let a professional take responsibility for it: >>>>>>http://www.differentials.com/install.html >>>>>>http://www.----------.com/dana35c/TJDana35.pdf >>>>>> God Bless America, Bill O|||||||O >>>>>>mailto:-------------------- http://www.----------.com/ >>>>>> >>>>>>Carl wrote: >>>>>> >>>>>> >>>>>> >>>>>>>The one I'm looking at is in an apparently good rear end with 4.10 >>>>>>>gears. >>>>>>>It's located far away so I told him I just want the locker. You're >>>>>>>probably >>>>>>>right -you usually are- .. I think I'll just shell out the $$ for a >>>>>>>new one. >>>>>>> >>>>>>>Is a locker difficult to install? >>>>>>> >>>>>>>Carl >>>>> >>>>> >>>>> >>>>-- >>>>Jerry Bransford >>>>PP-ASEL N6TAY >>>>See the Geezer Jeep at >>>>http://members.cox.net/jerrypb/ >>> >>> >>> >>-- >>Jerry Bransford >>PP-ASEL N6TAY >>See the Geezer Jeep at >>http://members.cox.net/jerrypb/ > > > -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
Re: Trac - Loc
Does it matter? I was doing a u-turn and nearly coasting through it at
minimal power. Carl wrote: > Jerry- > What engine? > > Carl > > "Jerry Bransford" <jerrypb@cox.net> wrote in message > news:bDn2f.2457$MN6.573@fed1read04... > >>My thankfully long-gone D35c axle grenaded/self-destructed 6 weeks after >>installing a locker. The axle had 33" tires on it during a slow-speed >>u-turn at a light-controlled intersection when it grenaded loudly enough >>to cause people a block away to look up to see what happened. I strongly >>recommend you not install a locker into a D35c, no matter how carefully >>you drive it. The trouble it causes is just not worth it. >> >>Jerry >> >>Carl wrote: >> >>>Ya, I realize the risk. A lot of my friends run locked up D35's on large >>>and larger tires. General rule of thumb: Drive it like its a D35. Even >>>with the low-output 4cyl, I'm sure it will eventually break. >>> >>>Thanks for the input guys.. looks like I'll be going with a brand new >>>lockright. >>> >>>Carl >>> >>> >>>"Jerry Bransford" <jerrypb@cox.net> wrote in message >>>news:Xrn2f.2455$MN6.950@fed1read04... >>> >>> >>>>Yep but the axleshafts on your Dana 35c sure are not even close to being >>>>strong enough to run a locker and 33" tires. :eek: >>>> >>>>Jerry >>>> >>>>Carl wrote: >>>> >>>> >>>>>Is a lockright strong enough for my 4cyl turning 33's? >>>>> >>>>>Carl >>>>> >>>>>"L.W. ("ßill") ------ III" <----------@cox.net> wrote in message >>>>>news:4349FC78.1EA322B2@cox.net... >>>>> >>>>> >>>>> >>>>>>Hi Carl, >>>>>> The Lock Right locker from Powertrax will slip right in place of >>>>>>your spiders, but it's not very strong. The Detroit will take a bunch >>>>>>of >>>>>>precise tools and a junk drawer full of shims to bring her in, may be >>>>>>better to let a professional take responsibility for it: >>>>>>http://www.differentials.com/install.html >>>>>>http://www.----------.com/dana35c/TJDana35.pdf >>>>>> God Bless America, Bill O|||||||O >>>>>>mailto:-------------------- http://www.----------.com/ >>>>>> >>>>>>Carl wrote: >>>>>> >>>>>> >>>>>> >>>>>>>The one I'm looking at is in an apparently good rear end with 4.10 >>>>>>>gears. >>>>>>>It's located far away so I told him I just want the locker. You're >>>>>>>probably >>>>>>>right -you usually are- .. I think I'll just shell out the $$ for a >>>>>>>new one. >>>>>>> >>>>>>>Is a locker difficult to install? >>>>>>> >>>>>>>Carl >>>>> >>>>> >>>>> >>>>-- >>>>Jerry Bransford >>>>PP-ASEL N6TAY >>>>See the Geezer Jeep at >>>>http://members.cox.net/jerrypb/ >>> >>> >>> >>-- >>Jerry Bransford >>PP-ASEL N6TAY >>See the Geezer Jeep at >>http://members.cox.net/jerrypb/ > > > -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
Re: Trac - Loc
So am I better off gettin a posi instead of a locker? Am I less likely to
break with a posi? Carl "Greg" <greglc84@hotmail.com> wrote in message news:6yu2f.137206$oW2.31315@pd7tw1no... > Like bill said, that looks like an open carrier taken out after putting a > detroit in, go have a look here for your prices and pictures > http://completeoffroad.com/wsm/c-15_dana__35_m35.html unfortunately they > don't have a pic of the dana 35 detroit, but you could look at the D 44, D > 30, 9" ones etc. Good place to buy from, best I found on the net for > prices, I am in Canada and saved $200.00 on my daughter's 9" detroit and > $250.00 on my AMC 20 detroit. > Greg > > "Carl" <carlsaiyed@REMOVE.hotmail.com> wrote in message > news:MN2dnfQtbKP9n9feRVn-uA@comcast.com... >> Wow, so he is ripping someone off? >> >> Carl >> >> "L.W. ("ßill") ------ III" <----------@cox.net> wrote in message >> news:434A00A2.C6148F25@cox.net... >>> Hi Carl, >>> That's what I hate about EBay! What you're looking at is the Locker >>> box and the old stock open differential. The Detroit will look machined >>> like the one at: http://www.4x4wire.com/jeep/reviews/super35d/ >>> God Bless America, Bill O|||||||O >>> mailto:-------------------- http://www.----------.com/ >>> >>> Carl wrote: >>>> >>>> Bill- >>>> What about this one? >>>> http://cgi.ebay.com/ebaymotors/ws/eB...tem=8004904578 >>>> >>>> Carl >> >> > > |
Re: Trac - Loc
So am I better off gettin a posi instead of a locker? Am I less likely to
break with a posi? Carl "Greg" <greglc84@hotmail.com> wrote in message news:6yu2f.137206$oW2.31315@pd7tw1no... > Like bill said, that looks like an open carrier taken out after putting a > detroit in, go have a look here for your prices and pictures > http://completeoffroad.com/wsm/c-15_dana__35_m35.html unfortunately they > don't have a pic of the dana 35 detroit, but you could look at the D 44, D > 30, 9" ones etc. Good place to buy from, best I found on the net for > prices, I am in Canada and saved $200.00 on my daughter's 9" detroit and > $250.00 on my AMC 20 detroit. > Greg > > "Carl" <carlsaiyed@REMOVE.hotmail.com> wrote in message > news:MN2dnfQtbKP9n9feRVn-uA@comcast.com... >> Wow, so he is ripping someone off? >> >> Carl >> >> "L.W. ("ßill") ------ III" <----------@cox.net> wrote in message >> news:434A00A2.C6148F25@cox.net... >>> Hi Carl, >>> That's what I hate about EBay! What you're looking at is the Locker >>> box and the old stock open differential. The Detroit will look machined >>> like the one at: http://www.4x4wire.com/jeep/reviews/super35d/ >>> God Bless America, Bill O|||||||O >>> mailto:-------------------- http://www.----------.com/ >>> >>> Carl wrote: >>>> >>>> Bill- >>>> What about this one? >>>> http://cgi.ebay.com/ebaymotors/ws/eB...tem=8004904578 >>>> >>>> Carl >> >> > > |
| All times are GMT -4. The time now is 07:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands