Stupid newbie question about JGC front end
#1
Guest
Posts: n/a
Stupid newbie question about JGC front end
I put new brake pads and rotors on my 98 GC (150,000 mi) and while I had
the front end up I found was (I think) too much free play when I rotate the
wheels while in the air.
With the front end elevated, if I spin either front wheel, the other wheel
turns in the opposite direction, but theres about an inch of free play
before the other wheel turns.
It has a QuadraTrack trans with no 2WD selection.
Thanks much,
Rufus
the front end up I found was (I think) too much free play when I rotate the
wheels while in the air.
With the front end elevated, if I spin either front wheel, the other wheel
turns in the opposite direction, but theres about an inch of free play
before the other wheel turns.
It has a QuadraTrack trans with no 2WD selection.
Thanks much,
Rufus
#2
Guest
Posts: n/a
Re: Stupid newbie question about JGC front end
An inch of play before the other wheel turns is not bad at all. You are
dealing with the accumlated slop of 2 splined shafts and 2 gear
interfaces. At 150k that is quite nominal.
rufus t wrote:
> I put new brake pads and rotors on my 98 GC (150,000 mi) and while I had
> the front end up I found was (I think) too much free play when I rotate the
> wheels while in the air.
>
> With the front end elevated, if I spin either front wheel, the other wheel
> turns in the opposite direction, but theres about an inch of free play
> before the other wheel turns.
> It has a QuadraTrack trans with no 2WD selection.
>
>
> Thanks much,
>
> Rufus
>
dealing with the accumlated slop of 2 splined shafts and 2 gear
interfaces. At 150k that is quite nominal.
rufus t wrote:
> I put new brake pads and rotors on my 98 GC (150,000 mi) and while I had
> the front end up I found was (I think) too much free play when I rotate the
> wheels while in the air.
>
> With the front end elevated, if I spin either front wheel, the other wheel
> turns in the opposite direction, but theres about an inch of free play
> before the other wheel turns.
> It has a QuadraTrack trans with no 2WD selection.
>
>
> Thanks much,
>
> Rufus
>
#3
Guest
Posts: n/a
Re: Stupid newbie question about JGC front end
An inch of play before the other wheel turns is not bad at all. You are
dealing with the accumlated slop of 2 splined shafts and 2 gear
interfaces. At 150k that is quite nominal.
rufus t wrote:
> I put new brake pads and rotors on my 98 GC (150,000 mi) and while I had
> the front end up I found was (I think) too much free play when I rotate the
> wheels while in the air.
>
> With the front end elevated, if I spin either front wheel, the other wheel
> turns in the opposite direction, but theres about an inch of free play
> before the other wheel turns.
> It has a QuadraTrack trans with no 2WD selection.
>
>
> Thanks much,
>
> Rufus
>
dealing with the accumlated slop of 2 splined shafts and 2 gear
interfaces. At 150k that is quite nominal.
rufus t wrote:
> I put new brake pads and rotors on my 98 GC (150,000 mi) and while I had
> the front end up I found was (I think) too much free play when I rotate the
> wheels while in the air.
>
> With the front end elevated, if I spin either front wheel, the other wheel
> turns in the opposite direction, but theres about an inch of free play
> before the other wheel turns.
> It has a QuadraTrack trans with no 2WD selection.
>
>
> Thanks much,
>
> Rufus
>
#4
Guest
Posts: n/a
Re: Stupid newbie question about JGC front end
An inch of play before the other wheel turns is not bad at all. You are
dealing with the accumlated slop of 2 splined shafts and 2 gear
interfaces. At 150k that is quite nominal.
rufus t wrote:
> I put new brake pads and rotors on my 98 GC (150,000 mi) and while I had
> the front end up I found was (I think) too much free play when I rotate the
> wheels while in the air.
>
> With the front end elevated, if I spin either front wheel, the other wheel
> turns in the opposite direction, but theres about an inch of free play
> before the other wheel turns.
> It has a QuadraTrack trans with no 2WD selection.
>
>
> Thanks much,
>
> Rufus
>
dealing with the accumlated slop of 2 splined shafts and 2 gear
interfaces. At 150k that is quite nominal.
rufus t wrote:
> I put new brake pads and rotors on my 98 GC (150,000 mi) and while I had
> the front end up I found was (I think) too much free play when I rotate the
> wheels while in the air.
>
> With the front end elevated, if I spin either front wheel, the other wheel
> turns in the opposite direction, but theres about an inch of free play
> before the other wheel turns.
> It has a QuadraTrack trans with no 2WD selection.
>
>
> Thanks much,
>
> Rufus
>
#5
Guest
Posts: n/a
Re: Stupid newbie question about JGC front end
An inch of play before the other wheel turns is not bad at all. You are
dealing with the accumlated slop of 2 splined shafts and 2 gear
interfaces. At 150k that is quite nominal.
rufus t wrote:
> I put new brake pads and rotors on my 98 GC (150,000 mi) and while I had
> the front end up I found was (I think) too much free play when I rotate the
> wheels while in the air.
>
> With the front end elevated, if I spin either front wheel, the other wheel
> turns in the opposite direction, but theres about an inch of free play
> before the other wheel turns.
> It has a QuadraTrack trans with no 2WD selection.
>
>
> Thanks much,
>
> Rufus
>
dealing with the accumlated slop of 2 splined shafts and 2 gear
interfaces. At 150k that is quite nominal.
rufus t wrote:
> I put new brake pads and rotors on my 98 GC (150,000 mi) and while I had
> the front end up I found was (I think) too much free play when I rotate the
> wheels while in the air.
>
> With the front end elevated, if I spin either front wheel, the other wheel
> turns in the opposite direction, but theres about an inch of free play
> before the other wheel turns.
> It has a QuadraTrack trans with no 2WD selection.
>
>
> Thanks much,
>
> Rufus
>
Thread
Thread Starter
Forum
Replies
Last Post
gjt
Jeep Mailing List
31
12-02-2004 03:55 PM
Karl
Jeep Mailing List
197
11-29-2004 03:00 PM
Bob Casanova
Jeep Mailing List
10
11-10-2004 09:20 PM
John Crichton
Jeep Mailing List
0
11-08-2004 12:21 AM
L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III
Jeep Mailing List
0
11-07-2004 02:33 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)