I just got my wife a 1991 Cherokee Sport, and while I knew this ahead of
time, the lack of a tach, temp, amp and oil pressure gauges is *very*
annoying. I figure I can junkyard the cluster out of a Laredo for >
$100. Is it just a simple matter of swapping out the clusters then, or
is there a bit/some/a lot more work that goes into it? I'm assuming I
have to at least put in the sensor for the tachometer and run the cable.
Do I have to replace all the sensors on the engine as well?

-moitz-

 

Yes. you will need all the sensors for guage output rather than light
output (they are different)..

Jeremy

"Moitz" <meuzelaj@hotmail.com> wrote in message
news:l3jTb.206241$xy6.1057183@attbi_s02...
> I just got my wife a 1991 Cherokee Sport, and while I knew this ahead of
> time, the lack of a tach, temp, amp and oil pressure gauges is *very*
> annoying. I figure I can junkyard the cluster out of a Laredo for >
> $100. Is it just a simple matter of swapping out the clusters then, or
> is there a bit/some/a lot more work that goes into it? I'm assuming I
> have to at least put in the sensor for the tachometer and run the cable.
> Do I have to replace all the sensors on the engine as well?
>
> -moitz-
>

 

Yes. you will need all the sensors for guage output rather than light
output (they are different)..

Jeremy

"Moitz" <meuzelaj@hotmail.com> wrote in message
news:l3jTb.206241$xy6.1057183@attbi_s02...
> I just got my wife a 1991 Cherokee Sport, and while I knew this ahead of
> time, the lack of a tach, temp, amp and oil pressure gauges is *very*
> annoying. I figure I can junkyard the cluster out of a Laredo for >
> $100. Is it just a simple matter of swapping out the clusters then, or
> is there a bit/some/a lot more work that goes into it? I'm assuming I
> have to at least put in the sensor for the tachometer and run the cable.
> Do I have to replace all the sensors on the engine as well?
>
> -moitz-
>

 

Yes. you will need all the sensors for guage output rather than light
output (they are different)..

Jeremy

"Moitz" <meuzelaj@hotmail.com> wrote in message
news:l3jTb.206241$xy6.1057183@attbi_s02...
> I just got my wife a 1991 Cherokee Sport, and while I knew this ahead of
> time, the lack of a tach, temp, amp and oil pressure gauges is *very*
> annoying. I figure I can junkyard the cluster out of a Laredo for >
> $100. Is it just a simple matter of swapping out the clusters then, or
> is there a bit/some/a lot more work that goes into it? I'm assuming I
> have to at least put in the sensor for the tachometer and run the cable.
> Do I have to replace all the sensors on the engine as well?
>
> -moitz-
>

 

Jeremy Hupe wrote:
> Yes. you will need all the sensors for guage output rather than light
> output (they are different)..

And a bit more expensive (23.99 as opposed to 3.99 for the oil sending
unit.)

Well, this Jeep is rapidly turning into my wife's daily driver/my
project car, so one of these days I'll get a site up about my adventures
turning it into what I want.

-moitz-

 

Jeremy Hupe wrote:
> Yes. you will need all the sensors for guage output rather than light
> output (they are different)..

And a bit more expensive (23.99 as opposed to 3.99 for the oil sending
unit.)

Well, this Jeep is rapidly turning into my wife's daily driver/my
project car, so one of these days I'll get a site up about my adventures
turning it into what I want.

-moitz-

 

Jeremy Hupe wrote:
> Yes. you will need all the sensors for guage output rather than light
> output (they are different)..

And a bit more expensive (23.99 as opposed to 3.99 for the oil sending
unit.)

Well, this Jeep is rapidly turning into my wife's daily driver/my
project car, so one of these days I'll get a site up about my adventures
turning it into what I want.

-moitz-