seatbelts in rear seat of a CJ
#2
Guest
Posts: n/a
Re: seatbelts in rear seat of a CJ
Install a roll cage from a 92-95 YJ. The cage will bolt to your CJ, you
need to figure out a way to attach the new cage to the windshield (using a
nutzert or similar). Then you have a place to bolt 3-point belts for the
rear passengers. That is the easiest way to get it done. Also see if any
of the local 4x4 fab shops can make somethinig for you. Maybe they can add
to your current cage, or better yet a full roll cage so the people up front
are safe too.
"Steve" <stevncin@charter.net> wrote in message
news:7rhUe.28798$ih4.16730@fe02.lga...
> Anybody had luck with installing some kind of seatbelt with a shoulder
> strap on the back seat of a CJ? If so how was this done?
>
> Thanks
>
need to figure out a way to attach the new cage to the windshield (using a
nutzert or similar). Then you have a place to bolt 3-point belts for the
rear passengers. That is the easiest way to get it done. Also see if any
of the local 4x4 fab shops can make somethinig for you. Maybe they can add
to your current cage, or better yet a full roll cage so the people up front
are safe too.
"Steve" <stevncin@charter.net> wrote in message
news:7rhUe.28798$ih4.16730@fe02.lga...
> Anybody had luck with installing some kind of seatbelt with a shoulder
> strap on the back seat of a CJ? If so how was this done?
>
> Thanks
>
#3
Guest
Posts: n/a
Re: seatbelts in rear seat of a CJ
Install a roll cage from a 92-95 YJ. The cage will bolt to your CJ, you
need to figure out a way to attach the new cage to the windshield (using a
nutzert or similar). Then you have a place to bolt 3-point belts for the
rear passengers. That is the easiest way to get it done. Also see if any
of the local 4x4 fab shops can make somethinig for you. Maybe they can add
to your current cage, or better yet a full roll cage so the people up front
are safe too.
"Steve" <stevncin@charter.net> wrote in message
news:7rhUe.28798$ih4.16730@fe02.lga...
> Anybody had luck with installing some kind of seatbelt with a shoulder
> strap on the back seat of a CJ? If so how was this done?
>
> Thanks
>
need to figure out a way to attach the new cage to the windshield (using a
nutzert or similar). Then you have a place to bolt 3-point belts for the
rear passengers. That is the easiest way to get it done. Also see if any
of the local 4x4 fab shops can make somethinig for you. Maybe they can add
to your current cage, or better yet a full roll cage so the people up front
are safe too.
"Steve" <stevncin@charter.net> wrote in message
news:7rhUe.28798$ih4.16730@fe02.lga...
> Anybody had luck with installing some kind of seatbelt with a shoulder
> strap on the back seat of a CJ? If so how was this done?
>
> Thanks
>
#4
Guest
Posts: n/a
Re: seatbelts in rear seat of a CJ
Install a roll cage from a 92-95 YJ. The cage will bolt to your CJ, you
need to figure out a way to attach the new cage to the windshield (using a
nutzert or similar). Then you have a place to bolt 3-point belts for the
rear passengers. That is the easiest way to get it done. Also see if any
of the local 4x4 fab shops can make somethinig for you. Maybe they can add
to your current cage, or better yet a full roll cage so the people up front
are safe too.
"Steve" <stevncin@charter.net> wrote in message
news:7rhUe.28798$ih4.16730@fe02.lga...
> Anybody had luck with installing some kind of seatbelt with a shoulder
> strap on the back seat of a CJ? If so how was this done?
>
> Thanks
>
need to figure out a way to attach the new cage to the windshield (using a
nutzert or similar). Then you have a place to bolt 3-point belts for the
rear passengers. That is the easiest way to get it done. Also see if any
of the local 4x4 fab shops can make somethinig for you. Maybe they can add
to your current cage, or better yet a full roll cage so the people up front
are safe too.
"Steve" <stevncin@charter.net> wrote in message
news:7rhUe.28798$ih4.16730@fe02.lga...
> Anybody had luck with installing some kind of seatbelt with a shoulder
> strap on the back seat of a CJ? If so how was this done?
>
> Thanks
>
#5
Guest
Posts: n/a
Re: seatbelts in rear seat of a CJ
Install a roll cage from a 92-95 YJ. The cage will bolt to your CJ, you
need to figure out a way to attach the new cage to the windshield (using a
nutzert or similar). Then you have a place to bolt 3-point belts for the
rear passengers. That is the easiest way to get it done. Also see if any
of the local 4x4 fab shops can make somethinig for you. Maybe they can add
to your current cage, or better yet a full roll cage so the people up front
are safe too.
"Steve" <stevncin@charter.net> wrote in message
news:7rhUe.28798$ih4.16730@fe02.lga...
> Anybody had luck with installing some kind of seatbelt with a shoulder
> strap on the back seat of a CJ? If so how was this done?
>
> Thanks
>
need to figure out a way to attach the new cage to the windshield (using a
nutzert or similar). Then you have a place to bolt 3-point belts for the
rear passengers. That is the easiest way to get it done. Also see if any
of the local 4x4 fab shops can make somethinig for you. Maybe they can add
to your current cage, or better yet a full roll cage so the people up front
are safe too.
"Steve" <stevncin@charter.net> wrote in message
news:7rhUe.28798$ih4.16730@fe02.lga...
> Anybody had luck with installing some kind of seatbelt with a shoulder
> strap on the back seat of a CJ? If so how was this done?
>
> Thanks
>
#6
Guest
Posts: n/a
Re: seatbelts in rear seat of a CJ
You have to change the roll bar so you have a place to anchor the shoulder
belts.
"Steve" <stevncin@charter.net> wrote in message
news:7rhUe.28798$ih4.16730@fe02.lga...
> Anybody had luck with installing some kind of seatbelt with a shoulder
> strap on the back seat of a CJ? If so how was this done?
>
> Thanks
>
belts.
"Steve" <stevncin@charter.net> wrote in message
news:7rhUe.28798$ih4.16730@fe02.lga...
> Anybody had luck with installing some kind of seatbelt with a shoulder
> strap on the back seat of a CJ? If so how was this done?
>
> Thanks
>
#7
Guest
Posts: n/a
Re: seatbelts in rear seat of a CJ
You have to change the roll bar so you have a place to anchor the shoulder
belts.
"Steve" <stevncin@charter.net> wrote in message
news:7rhUe.28798$ih4.16730@fe02.lga...
> Anybody had luck with installing some kind of seatbelt with a shoulder
> strap on the back seat of a CJ? If so how was this done?
>
> Thanks
>
belts.
"Steve" <stevncin@charter.net> wrote in message
news:7rhUe.28798$ih4.16730@fe02.lga...
> Anybody had luck with installing some kind of seatbelt with a shoulder
> strap on the back seat of a CJ? If so how was this done?
>
> Thanks
>
#8
Guest
Posts: n/a
Re: seatbelts in rear seat of a CJ
You have to change the roll bar so you have a place to anchor the shoulder
belts.
"Steve" <stevncin@charter.net> wrote in message
news:7rhUe.28798$ih4.16730@fe02.lga...
> Anybody had luck with installing some kind of seatbelt with a shoulder
> strap on the back seat of a CJ? If so how was this done?
>
> Thanks
>
belts.
"Steve" <stevncin@charter.net> wrote in message
news:7rhUe.28798$ih4.16730@fe02.lga...
> Anybody had luck with installing some kind of seatbelt with a shoulder
> strap on the back seat of a CJ? If so how was this done?
>
> Thanks
>
#9
Guest
Posts: n/a
Re: seatbelts in rear seat of a CJ
You have to change the roll bar so you have a place to anchor the shoulder
belts.
"Steve" <stevncin@charter.net> wrote in message
news:7rhUe.28798$ih4.16730@fe02.lga...
> Anybody had luck with installing some kind of seatbelt with a shoulder
> strap on the back seat of a CJ? If so how was this done?
>
> Thanks
>
belts.
"Steve" <stevncin@charter.net> wrote in message
news:7rhUe.28798$ih4.16730@fe02.lga...
> Anybody had luck with installing some kind of seatbelt with a shoulder
> strap on the back seat of a CJ? If so how was this done?
>
> Thanks
>
#10
Guest
Posts: n/a
Re: seatbelts in rear seat of a CJ
Just a FYI, those are all 'sport' bars, they in no way are a 'cage' or
'roll' bar because they are not tied into the frame.
You 'can' get kits to make the stock sport bar a 'roll' bar, but a
'cage' would need to be built.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Rusted wrote:
>
> Install a roll cage from a 92-95 YJ. The cage will bolt to your CJ, you
> need to figure out a way to attach the new cage to the windshield (using a
> nutzert or similar). Then you have a place to bolt 3-point belts for the
> rear passengers. That is the easiest way to get it done. Also see if any
> of the local 4x4 fab shops can make somethinig for you. Maybe they can add
> to your current cage, or better yet a full roll cage so the people up front
> are safe too.
>
> "Steve" <stevncin@charter.net> wrote in message
> news:7rhUe.28798$ih4.16730@fe02.lga...
> > Anybody had luck with installing some kind of seatbelt with a shoulder
> > strap on the back seat of a CJ? If so how was this done?
> >
> > Thanks
> >
'roll' bar because they are not tied into the frame.
You 'can' get kits to make the stock sport bar a 'roll' bar, but a
'cage' would need to be built.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Rusted wrote:
>
> Install a roll cage from a 92-95 YJ. The cage will bolt to your CJ, you
> need to figure out a way to attach the new cage to the windshield (using a
> nutzert or similar). Then you have a place to bolt 3-point belts for the
> rear passengers. That is the easiest way to get it done. Also see if any
> of the local 4x4 fab shops can make somethinig for you. Maybe they can add
> to your current cage, or better yet a full roll cage so the people up front
> are safe too.
>
> "Steve" <stevncin@charter.net> wrote in message
> news:7rhUe.28798$ih4.16730@fe02.lga...
> > Anybody had luck with installing some kind of seatbelt with a shoulder
> > strap on the back seat of a CJ? If so how was this done?
> >
> > Thanks
> >