Removing hinge pins
11-09-2005 | 02:56 AM
#2
Guest
Posts: n/a
Re: Removing hinge pins
Hood hinges don't come apart. Door hinges have a nut, on the bottom of the
top hinge. Take this off, open the door, and lift. The door should come
right off the vehicle. If you don't have a Jeep Wrangler, this may not
work. ;o)
Service for these hinges is a drop of motor oil, as needed.
Earle
"popeyeball" <popeyeball@yahoo.com> wrote in message
news:1131521473.192748.268180@g14g2000cwa.googlegr oups.com...
> I have some rust sprouting from my hood and door hinges. How do I
> remove the pins that hold the hinges on? Do these need to be pried
> off? Pry up the top pin on the doors and which side on the hood? Or
> am I way off base here? Steve
>
>
top hinge. Take this off, open the door, and lift. The door should come
right off the vehicle. If you don't have a Jeep Wrangler, this may not
work. ;o)
Service for these hinges is a drop of motor oil, as needed.
Earle
"popeyeball" <popeyeball@yahoo.com> wrote in message
news:1131521473.192748.268180@g14g2000cwa.googlegr oups.com...
> I have some rust sprouting from my hood and door hinges. How do I
> remove the pins that hold the hinges on? Do these need to be pried
> off? Pry up the top pin on the doors and which side on the hood? Or
> am I way off base here? Steve
>
>
11-09-2005 | 02:56 AM
#3
Guest
Posts: n/a
Re: Removing hinge pins
Hood hinges don't come apart. Door hinges have a nut, on the bottom of the
top hinge. Take this off, open the door, and lift. The door should come
right off the vehicle. If you don't have a Jeep Wrangler, this may not
work. ;o)
Service for these hinges is a drop of motor oil, as needed.
Earle
"popeyeball" <popeyeball@yahoo.com> wrote in message
news:1131521473.192748.268180@g14g2000cwa.googlegr oups.com...
> I have some rust sprouting from my hood and door hinges. How do I
> remove the pins that hold the hinges on? Do these need to be pried
> off? Pry up the top pin on the doors and which side on the hood? Or
> am I way off base here? Steve
>
>
top hinge. Take this off, open the door, and lift. The door should come
right off the vehicle. If you don't have a Jeep Wrangler, this may not
work. ;o)
Service for these hinges is a drop of motor oil, as needed.
Earle
"popeyeball" <popeyeball@yahoo.com> wrote in message
news:1131521473.192748.268180@g14g2000cwa.googlegr oups.com...
> I have some rust sprouting from my hood and door hinges. How do I
> remove the pins that hold the hinges on? Do these need to be pried
> off? Pry up the top pin on the doors and which side on the hood? Or
> am I way off base here? Steve
>
>
11-09-2005 | 02:56 AM
#4
Guest
Posts: n/a
Re: Removing hinge pins
Hood hinges don't come apart. Door hinges have a nut, on the bottom of the
top hinge. Take this off, open the door, and lift. The door should come
right off the vehicle. If you don't have a Jeep Wrangler, this may not
work. ;o)
Service for these hinges is a drop of motor oil, as needed.
Earle
"popeyeball" <popeyeball@yahoo.com> wrote in message
news:1131521473.192748.268180@g14g2000cwa.googlegr oups.com...
> I have some rust sprouting from my hood and door hinges. How do I
> remove the pins that hold the hinges on? Do these need to be pried
> off? Pry up the top pin on the doors and which side on the hood? Or
> am I way off base here? Steve
>
>
top hinge. Take this off, open the door, and lift. The door should come
right off the vehicle. If you don't have a Jeep Wrangler, this may not
work. ;o)
Service for these hinges is a drop of motor oil, as needed.
Earle
"popeyeball" <popeyeball@yahoo.com> wrote in message
news:1131521473.192748.268180@g14g2000cwa.googlegr oups.com...
> I have some rust sprouting from my hood and door hinges. How do I
> remove the pins that hold the hinges on? Do these need to be pried
> off? Pry up the top pin on the doors and which side on the hood? Or
> am I way off base here? Steve
>
>
11-09-2005 | 09:33 AM
#5
Guest
Posts: n/a
Re: Removing hinge pins
Umm, what flavor of Jeep?
On a CJ or Wrangler, the hinges unbolt, the pins don't come out, but the
bolts do. Well, sort of anyway. The dash has to come off first and
then you likely need a torch to break the thread sealer loose.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
popeyeball wrote:
>
> I have some rust sprouting from my hood and door hinges. How do I
> remove the pins that hold the hinges on? Do these need to be pried
> off? Pry up the top pin on the doors and which side on the hood? Or
> am I way off base here? Steve
On a CJ or Wrangler, the hinges unbolt, the pins don't come out, but the
bolts do. Well, sort of anyway. The dash has to come off first and
then you likely need a torch to break the thread sealer loose.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
popeyeball wrote:
>
> I have some rust sprouting from my hood and door hinges. How do I
> remove the pins that hold the hinges on? Do these need to be pried
> off? Pry up the top pin on the doors and which side on the hood? Or
> am I way off base here? Steve
11-09-2005 | 09:33 AM
#6
Guest
Posts: n/a
Re: Removing hinge pins
Umm, what flavor of Jeep?
On a CJ or Wrangler, the hinges unbolt, the pins don't come out, but the
bolts do. Well, sort of anyway. The dash has to come off first and
then you likely need a torch to break the thread sealer loose.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
popeyeball wrote:
>
> I have some rust sprouting from my hood and door hinges. How do I
> remove the pins that hold the hinges on? Do these need to be pried
> off? Pry up the top pin on the doors and which side on the hood? Or
> am I way off base here? Steve
On a CJ or Wrangler, the hinges unbolt, the pins don't come out, but the
bolts do. Well, sort of anyway. The dash has to come off first and
then you likely need a torch to break the thread sealer loose.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
popeyeball wrote:
>
> I have some rust sprouting from my hood and door hinges. How do I
> remove the pins that hold the hinges on? Do these need to be pried
> off? Pry up the top pin on the doors and which side on the hood? Or
> am I way off base here? Steve
11-09-2005 | 09:33 AM
#7
Guest
Posts: n/a
Re: Removing hinge pins
Umm, what flavor of Jeep?
On a CJ or Wrangler, the hinges unbolt, the pins don't come out, but the
bolts do. Well, sort of anyway. The dash has to come off first and
then you likely need a torch to break the thread sealer loose.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
popeyeball wrote:
>
> I have some rust sprouting from my hood and door hinges. How do I
> remove the pins that hold the hinges on? Do these need to be pried
> off? Pry up the top pin on the doors and which side on the hood? Or
> am I way off base here? Steve
On a CJ or Wrangler, the hinges unbolt, the pins don't come out, but the
bolts do. Well, sort of anyway. The dash has to come off first and
then you likely need a torch to break the thread sealer loose.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
popeyeball wrote:
>
> I have some rust sprouting from my hood and door hinges. How do I
> remove the pins that hold the hinges on? Do these need to be pried
> off? Pry up the top pin on the doors and which side on the hood? Or
> am I way off base here? Steve
11-09-2005 | 05:46 PM
#8
Guest
Posts: n/a
Re: Removing hinge pins
It's a 97 TJ
I'll just treat the surface rust on the hood hinge - it's not serious.
I forgot about the torq nuts on door hinge.
I picked up a huge set of Lyle torx's (including the 51) at Sears for
$32. Sears salesman said the no longer carry Craftsman torx but Lyle.
Thanks for input. Steve
I'll just treat the surface rust on the hood hinge - it's not serious.
I forgot about the torq nuts on door hinge.
I picked up a huge set of Lyle torx's (including the 51) at Sears for
$32. Sears salesman said the no longer carry Craftsman torx but Lyle.
Thanks for input. Steve
11-09-2005 | 05:46 PM
#9
Guest
Posts: n/a
Re: Removing hinge pins
It's a 97 TJ
I'll just treat the surface rust on the hood hinge - it's not serious.
I forgot about the torq nuts on door hinge.
I picked up a huge set of Lyle torx's (including the 51) at Sears for
$32. Sears salesman said the no longer carry Craftsman torx but Lyle.
Thanks for input. Steve
I'll just treat the surface rust on the hood hinge - it's not serious.
I forgot about the torq nuts on door hinge.
I picked up a huge set of Lyle torx's (including the 51) at Sears for
$32. Sears salesman said the no longer carry Craftsman torx but Lyle.
Thanks for input. Steve
11-09-2005 | 05:46 PM
#10
Guest
Posts: n/a
Re: Removing hinge pins
It's a 97 TJ
I'll just treat the surface rust on the hood hinge - it's not serious.
I forgot about the torq nuts on door hinge.
I picked up a huge set of Lyle torx's (including the 51) at Sears for
$32. Sears salesman said the no longer carry Craftsman torx but Lyle.
Thanks for input. Steve
I'll just treat the surface rust on the hood hinge - it's not serious.
I forgot about the torq nuts on door hinge.
I picked up a huge set of Lyle torx's (including the 51) at Sears for
$32. Sears salesman said the no longer carry Craftsman torx but Lyle.
Thanks for input. Steve