Well, I ended up ordering it from a dealer. It will be here in a week, so
they say. The closest one to me is in Denver or something like that. I am
in Pittsburgh. It is hard to believe that no one has one anywhere around
here. It is getting pretty bad. I waited too long due to $$. The part is
$150 something. I am going to do the job myself. Hope I don't mess it up.

Enjoy,
Curt


"Will Honea" <whonea@codenet.net> wrote in message
news:JxX2tWiP5BNp-pn2-lF2dhtNBgoQI@anon.none.net...
> I kept running into the same issues when I converted the cylinders on
> my MJ. After screwing around for several days, the local Advanced
> Auto store called and said that they had just gotten them in from a
> third party supplier. They now stock both the master and the slave
> cylinders but they DO NOT have the tube that runs between them. The
> dealers should have a complete kit that has the master and slave
> already connected together. It can be a PITA to thread the assembly
> into place, but someone was sayin the other day that the dealer part
> (couple hundred bucks) is pre filled with fluid and bled.
>
> On Wed, 3 Sep 2003 17:49:42 UTC "curt" <h_curtis@verizon.net> wrote:
>
> > I am having trouble getting clutch master and slave. Even Jeep dealers
are
> > having trouble and saying a week away. Any suggestions on where to call
or
> > go? Not sure if aftermarket is ok or should I go with OEM?
> >
> > Curt
> >
> >
>
>
> --
> Will Honea <whonea@codenet.net>

 

Well, that would be tough considering I'll be the one driving. I'll make
sure you are the guy in front of me when I got on a little test drive.

Enjoy,
Curt

"Jeff Strickland" <beerman@yahoo.com> wrote in message
news:vlcodsfi1t5a20@corp.supernews.com...
>
> "curt" <h_curtis@verizon.net> wrote in message
> news:2ft5b.23018$NC2.910@nwrdny01.gnilink.net...
> > Well, I ended up ordering it from a dealer. It will be here in a week,
so
> > they say. The closest one to me is in Denver or something like that. I
> am
> > in Pittsburgh. It is hard to believe that no one has one anywhere
around
> > here. It is getting pretty bad. I waited too long due to $$. The part
> is
> > $150 something. I am going to do the job myself. Hope I don't mess it
> up.
> >
> > Enjoy,
> > Curt
> >
>
> Can you stay in front until you decide it is fixed right?
>
>
>
>

 

Well, that would be tough considering I'll be the one driving. I'll make
sure you are the guy in front of me when I got on a little test drive.

Enjoy,
Curt

"Jeff Strickland" <beerman@yahoo.com> wrote in message
news:vlcodsfi1t5a20@corp.supernews.com...
>
> "curt" <h_curtis@verizon.net> wrote in message
> news:2ft5b.23018$NC2.910@nwrdny01.gnilink.net...
> > Well, I ended up ordering it from a dealer. It will be here in a week,
so
> > they say. The closest one to me is in Denver or something like that. I
> am
> > in Pittsburgh. It is hard to believe that no one has one anywhere
around
> > here. It is getting pretty bad. I waited too long due to $$. The part
> is
> > $150 something. I am going to do the job myself. Hope I don't mess it
> up.
> >
> > Enjoy,
> > Curt
> >
>
> Can you stay in front until you decide it is fixed right?
>
>
>
>