rattling sound coming from front of 2.5L
02-24-2004 | 04:07 PM
#1
Guest
Posts: n/a
rattling sound coming from front of 2.5L
Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
it has an annoying rattle coming from the front of the block area. It
has 132,000 on the motor and the previous owner was mechanically
challenged.
I've changed out the rod bearings and oil pump to be safe (the rod
bearings didn't show much wear so I just plasti-gaged the mains and
they were within specs. Found out there was nothing to adjust on the
lifters so now I'm suspecting that there is some slop in the timing
chain and or tensioner.
Anybody familiar with the replacement of the wearables on the valve
timing on these engines? Best place to get replacement parts? Is the
tensioner spring over hydraulic or just spring?
Thanks for any help.
Tom
it has an annoying rattle coming from the front of the block area. It
has 132,000 on the motor and the previous owner was mechanically
challenged.
I've changed out the rod bearings and oil pump to be safe (the rod
bearings didn't show much wear so I just plasti-gaged the mains and
they were within specs. Found out there was nothing to adjust on the
lifters so now I'm suspecting that there is some slop in the timing
chain and or tensioner.
Anybody familiar with the replacement of the wearables on the valve
timing on these engines? Best place to get replacement parts? Is the
tensioner spring over hydraulic or just spring?
Thanks for any help.
Tom
02-24-2004 | 05:57 PM
#2
Guest
Posts: n/a
Re: rattling sound coming from front of 2.5L
My first guess is the timing chain and chain tensioner are worn.
"Tunohs" <tom@fiberspec.com> wrote in message
news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> it has an annoying rattle coming from the front of the block area. It
> has 132,000 on the motor and the previous owner was mechanically
> challenged.
>
> I've changed out the rod bearings and oil pump to be safe (the rod
> bearings didn't show much wear so I just plasti-gaged the mains and
> they were within specs. Found out there was nothing to adjust on the
> lifters so now I'm suspecting that there is some slop in the timing
> chain and or tensioner.
>
> Anybody familiar with the replacement of the wearables on the valve
> timing on these engines? Best place to get replacement parts? Is the
> tensioner spring over hydraulic or just spring?
>
> Thanks for any help.
>
> Tom
"Tunohs" <tom@fiberspec.com> wrote in message
news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> it has an annoying rattle coming from the front of the block area. It
> has 132,000 on the motor and the previous owner was mechanically
> challenged.
>
> I've changed out the rod bearings and oil pump to be safe (the rod
> bearings didn't show much wear so I just plasti-gaged the mains and
> they were within specs. Found out there was nothing to adjust on the
> lifters so now I'm suspecting that there is some slop in the timing
> chain and or tensioner.
>
> Anybody familiar with the replacement of the wearables on the valve
> timing on these engines? Best place to get replacement parts? Is the
> tensioner spring over hydraulic or just spring?
>
> Thanks for any help.
>
> Tom
02-24-2004 | 05:57 PM
#3
Guest
Posts: n/a
Re: rattling sound coming from front of 2.5L
My first guess is the timing chain and chain tensioner are worn.
"Tunohs" <tom@fiberspec.com> wrote in message
news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> it has an annoying rattle coming from the front of the block area. It
> has 132,000 on the motor and the previous owner was mechanically
> challenged.
>
> I've changed out the rod bearings and oil pump to be safe (the rod
> bearings didn't show much wear so I just plasti-gaged the mains and
> they were within specs. Found out there was nothing to adjust on the
> lifters so now I'm suspecting that there is some slop in the timing
> chain and or tensioner.
>
> Anybody familiar with the replacement of the wearables on the valve
> timing on these engines? Best place to get replacement parts? Is the
> tensioner spring over hydraulic or just spring?
>
> Thanks for any help.
>
> Tom
"Tunohs" <tom@fiberspec.com> wrote in message
news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> it has an annoying rattle coming from the front of the block area. It
> has 132,000 on the motor and the previous owner was mechanically
> challenged.
>
> I've changed out the rod bearings and oil pump to be safe (the rod
> bearings didn't show much wear so I just plasti-gaged the mains and
> they were within specs. Found out there was nothing to adjust on the
> lifters so now I'm suspecting that there is some slop in the timing
> chain and or tensioner.
>
> Anybody familiar with the replacement of the wearables on the valve
> timing on these engines? Best place to get replacement parts? Is the
> tensioner spring over hydraulic or just spring?
>
> Thanks for any help.
>
> Tom
02-24-2004 | 05:57 PM
#4
Guest
Posts: n/a
Re: rattling sound coming from front of 2.5L
My first guess is the timing chain and chain tensioner are worn.
"Tunohs" <tom@fiberspec.com> wrote in message
news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> it has an annoying rattle coming from the front of the block area. It
> has 132,000 on the motor and the previous owner was mechanically
> challenged.
>
> I've changed out the rod bearings and oil pump to be safe (the rod
> bearings didn't show much wear so I just plasti-gaged the mains and
> they were within specs. Found out there was nothing to adjust on the
> lifters so now I'm suspecting that there is some slop in the timing
> chain and or tensioner.
>
> Anybody familiar with the replacement of the wearables on the valve
> timing on these engines? Best place to get replacement parts? Is the
> tensioner spring over hydraulic or just spring?
>
> Thanks for any help.
>
> Tom
"Tunohs" <tom@fiberspec.com> wrote in message
news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> it has an annoying rattle coming from the front of the block area. It
> has 132,000 on the motor and the previous owner was mechanically
> challenged.
>
> I've changed out the rod bearings and oil pump to be safe (the rod
> bearings didn't show much wear so I just plasti-gaged the mains and
> they were within specs. Found out there was nothing to adjust on the
> lifters so now I'm suspecting that there is some slop in the timing
> chain and or tensioner.
>
> Anybody familiar with the replacement of the wearables on the valve
> timing on these engines? Best place to get replacement parts? Is the
> tensioner spring over hydraulic or just spring?
>
> Thanks for any help.
>
> Tom
02-25-2004 | 03:13 PM
#5
Guest
Posts: n/a
Re: rattling sound coming from front of 2.5L
Does it quiet down with increased revs? If so this is classic symptom of
loose timing chain.
"Tunohs" <tom@fiberspec.com> wrote in message
news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> it has an annoying rattle coming from the front of the block area. It
> has 132,000 on the motor and the previous owner was mechanically
> challenged.
>
> I've changed out the rod bearings and oil pump to be safe (the rod
> bearings didn't show much wear so I just plasti-gaged the mains and
> they were within specs. Found out there was nothing to adjust on the
> lifters so now I'm suspecting that there is some slop in the timing
> chain and or tensioner.
>
> Anybody familiar with the replacement of the wearables on the valve
> timing on these engines? Best place to get replacement parts? Is the
> tensioner spring over hydraulic or just spring?
>
> Thanks for any help.
>
> Tom
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.588 / Virus Database: 372 - Release Date: 2/13/2004
loose timing chain.
"Tunohs" <tom@fiberspec.com> wrote in message
news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> it has an annoying rattle coming from the front of the block area. It
> has 132,000 on the motor and the previous owner was mechanically
> challenged.
>
> I've changed out the rod bearings and oil pump to be safe (the rod
> bearings didn't show much wear so I just plasti-gaged the mains and
> they were within specs. Found out there was nothing to adjust on the
> lifters so now I'm suspecting that there is some slop in the timing
> chain and or tensioner.
>
> Anybody familiar with the replacement of the wearables on the valve
> timing on these engines? Best place to get replacement parts? Is the
> tensioner spring over hydraulic or just spring?
>
> Thanks for any help.
>
> Tom
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.588 / Virus Database: 372 - Release Date: 2/13/2004
02-25-2004 | 03:13 PM
#6
Guest
Posts: n/a
Re: rattling sound coming from front of 2.5L
Does it quiet down with increased revs? If so this is classic symptom of
loose timing chain.
"Tunohs" <tom@fiberspec.com> wrote in message
news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> it has an annoying rattle coming from the front of the block area. It
> has 132,000 on the motor and the previous owner was mechanically
> challenged.
>
> I've changed out the rod bearings and oil pump to be safe (the rod
> bearings didn't show much wear so I just plasti-gaged the mains and
> they were within specs. Found out there was nothing to adjust on the
> lifters so now I'm suspecting that there is some slop in the timing
> chain and or tensioner.
>
> Anybody familiar with the replacement of the wearables on the valve
> timing on these engines? Best place to get replacement parts? Is the
> tensioner spring over hydraulic or just spring?
>
> Thanks for any help.
>
> Tom
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.588 / Virus Database: 372 - Release Date: 2/13/2004
loose timing chain.
"Tunohs" <tom@fiberspec.com> wrote in message
news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> it has an annoying rattle coming from the front of the block area. It
> has 132,000 on the motor and the previous owner was mechanically
> challenged.
>
> I've changed out the rod bearings and oil pump to be safe (the rod
> bearings didn't show much wear so I just plasti-gaged the mains and
> they were within specs. Found out there was nothing to adjust on the
> lifters so now I'm suspecting that there is some slop in the timing
> chain and or tensioner.
>
> Anybody familiar with the replacement of the wearables on the valve
> timing on these engines? Best place to get replacement parts? Is the
> tensioner spring over hydraulic or just spring?
>
> Thanks for any help.
>
> Tom
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.588 / Virus Database: 372 - Release Date: 2/13/2004
02-25-2004 | 03:13 PM
#7
Guest
Posts: n/a
Re: rattling sound coming from front of 2.5L
Does it quiet down with increased revs? If so this is classic symptom of
loose timing chain.
"Tunohs" <tom@fiberspec.com> wrote in message
news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> it has an annoying rattle coming from the front of the block area. It
> has 132,000 on the motor and the previous owner was mechanically
> challenged.
>
> I've changed out the rod bearings and oil pump to be safe (the rod
> bearings didn't show much wear so I just plasti-gaged the mains and
> they were within specs. Found out there was nothing to adjust on the
> lifters so now I'm suspecting that there is some slop in the timing
> chain and or tensioner.
>
> Anybody familiar with the replacement of the wearables on the valve
> timing on these engines? Best place to get replacement parts? Is the
> tensioner spring over hydraulic or just spring?
>
> Thanks for any help.
>
> Tom
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.588 / Virus Database: 372 - Release Date: 2/13/2004
loose timing chain.
"Tunohs" <tom@fiberspec.com> wrote in message
news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> it has an annoying rattle coming from the front of the block area. It
> has 132,000 on the motor and the previous owner was mechanically
> challenged.
>
> I've changed out the rod bearings and oil pump to be safe (the rod
> bearings didn't show much wear so I just plasti-gaged the mains and
> they were within specs. Found out there was nothing to adjust on the
> lifters so now I'm suspecting that there is some slop in the timing
> chain and or tensioner.
>
> Anybody familiar with the replacement of the wearables on the valve
> timing on these engines? Best place to get replacement parts? Is the
> tensioner spring over hydraulic or just spring?
>
> Thanks for any help.
>
> Tom
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.588 / Virus Database: 372 - Release Date: 2/13/2004
02-25-2004 | 03:24 PM
#8
Guest
Posts: n/a
Re: rattling sound coming from front of 2.5L
If it's like mine, when I give it gas, no sound. When I'm coasting no
sound. But give it just barely a spot of gas and it rattles like crazy.
Kinda like just enough gas to match the rotation of something.... Mines
only in speeds above 45 or so. Been doing it for 3 years now...
Nick
"Stephen R. Conrad" <sconradpt@yahoo.com> wrote in message
news:c1is3u$1jifj6$1@ID-129890.news.uni-berlin.de...
> Does it quiet down with increased revs? If so this is classic symptom of
> loose timing chain.
>
> "Tunohs" <tom@fiberspec.com> wrote in message
> news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> > Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> > it has an annoying rattle coming from the front of the block area. It
> > has 132,000 on the motor and the previous owner was mechanically
> > challenged.
> >
> > I've changed out the rod bearings and oil pump to be safe (the rod
> > bearings didn't show much wear so I just plasti-gaged the mains and
> > they were within specs. Found out there was nothing to adjust on the
> > lifters so now I'm suspecting that there is some slop in the timing
> > chain and or tensioner.
> >
> > Anybody familiar with the replacement of the wearables on the valve
> > timing on these engines? Best place to get replacement parts? Is the
> > tensioner spring over hydraulic or just spring?
> >
> > Thanks for any help.
> >
> > Tom
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.588 / Virus Database: 372 - Release Date: 2/13/2004
>
>
sound. But give it just barely a spot of gas and it rattles like crazy.
Kinda like just enough gas to match the rotation of something.... Mines
only in speeds above 45 or so. Been doing it for 3 years now...
Nick
"Stephen R. Conrad" <sconradpt@yahoo.com> wrote in message
news:c1is3u$1jifj6$1@ID-129890.news.uni-berlin.de...
> Does it quiet down with increased revs? If so this is classic symptom of
> loose timing chain.
>
> "Tunohs" <tom@fiberspec.com> wrote in message
> news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> > Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> > it has an annoying rattle coming from the front of the block area. It
> > has 132,000 on the motor and the previous owner was mechanically
> > challenged.
> >
> > I've changed out the rod bearings and oil pump to be safe (the rod
> > bearings didn't show much wear so I just plasti-gaged the mains and
> > they were within specs. Found out there was nothing to adjust on the
> > lifters so now I'm suspecting that there is some slop in the timing
> > chain and or tensioner.
> >
> > Anybody familiar with the replacement of the wearables on the valve
> > timing on these engines? Best place to get replacement parts? Is the
> > tensioner spring over hydraulic or just spring?
> >
> > Thanks for any help.
> >
> > Tom
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.588 / Virus Database: 372 - Release Date: 2/13/2004
>
>
02-25-2004 | 03:24 PM
#9
Guest
Posts: n/a
Re: rattling sound coming from front of 2.5L
If it's like mine, when I give it gas, no sound. When I'm coasting no
sound. But give it just barely a spot of gas and it rattles like crazy.
Kinda like just enough gas to match the rotation of something.... Mines
only in speeds above 45 or so. Been doing it for 3 years now...
Nick
"Stephen R. Conrad" <sconradpt@yahoo.com> wrote in message
news:c1is3u$1jifj6$1@ID-129890.news.uni-berlin.de...
> Does it quiet down with increased revs? If so this is classic symptom of
> loose timing chain.
>
> "Tunohs" <tom@fiberspec.com> wrote in message
> news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> > Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> > it has an annoying rattle coming from the front of the block area. It
> > has 132,000 on the motor and the previous owner was mechanically
> > challenged.
> >
> > I've changed out the rod bearings and oil pump to be safe (the rod
> > bearings didn't show much wear so I just plasti-gaged the mains and
> > they were within specs. Found out there was nothing to adjust on the
> > lifters so now I'm suspecting that there is some slop in the timing
> > chain and or tensioner.
> >
> > Anybody familiar with the replacement of the wearables on the valve
> > timing on these engines? Best place to get replacement parts? Is the
> > tensioner spring over hydraulic or just spring?
> >
> > Thanks for any help.
> >
> > Tom
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.588 / Virus Database: 372 - Release Date: 2/13/2004
>
>
sound. But give it just barely a spot of gas and it rattles like crazy.
Kinda like just enough gas to match the rotation of something.... Mines
only in speeds above 45 or so. Been doing it for 3 years now...
Nick
"Stephen R. Conrad" <sconradpt@yahoo.com> wrote in message
news:c1is3u$1jifj6$1@ID-129890.news.uni-berlin.de...
> Does it quiet down with increased revs? If so this is classic symptom of
> loose timing chain.
>
> "Tunohs" <tom@fiberspec.com> wrote in message
> news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> > Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> > it has an annoying rattle coming from the front of the block area. It
> > has 132,000 on the motor and the previous owner was mechanically
> > challenged.
> >
> > I've changed out the rod bearings and oil pump to be safe (the rod
> > bearings didn't show much wear so I just plasti-gaged the mains and
> > they were within specs. Found out there was nothing to adjust on the
> > lifters so now I'm suspecting that there is some slop in the timing
> > chain and or tensioner.
> >
> > Anybody familiar with the replacement of the wearables on the valve
> > timing on these engines? Best place to get replacement parts? Is the
> > tensioner spring over hydraulic or just spring?
> >
> > Thanks for any help.
> >
> > Tom
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.588 / Virus Database: 372 - Release Date: 2/13/2004
>
>
02-25-2004 | 03:24 PM
#10
Guest
Posts: n/a
Re: rattling sound coming from front of 2.5L
If it's like mine, when I give it gas, no sound. When I'm coasting no
sound. But give it just barely a spot of gas and it rattles like crazy.
Kinda like just enough gas to match the rotation of something.... Mines
only in speeds above 45 or so. Been doing it for 3 years now...
Nick
"Stephen R. Conrad" <sconradpt@yahoo.com> wrote in message
news:c1is3u$1jifj6$1@ID-129890.news.uni-berlin.de...
> Does it quiet down with increased revs? If so this is classic symptom of
> loose timing chain.
>
> "Tunohs" <tom@fiberspec.com> wrote in message
> news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> > Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> > it has an annoying rattle coming from the front of the block area. It
> > has 132,000 on the motor and the previous owner was mechanically
> > challenged.
> >
> > I've changed out the rod bearings and oil pump to be safe (the rod
> > bearings didn't show much wear so I just plasti-gaged the mains and
> > they were within specs. Found out there was nothing to adjust on the
> > lifters so now I'm suspecting that there is some slop in the timing
> > chain and or tensioner.
> >
> > Anybody familiar with the replacement of the wearables on the valve
> > timing on these engines? Best place to get replacement parts? Is the
> > tensioner spring over hydraulic or just spring?
> >
> > Thanks for any help.
> >
> > Tom
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.588 / Virus Database: 372 - Release Date: 2/13/2004
>
>
sound. But give it just barely a spot of gas and it rattles like crazy.
Kinda like just enough gas to match the rotation of something.... Mines
only in speeds above 45 or so. Been doing it for 3 years now...
Nick
"Stephen R. Conrad" <sconradpt@yahoo.com> wrote in message
news:c1is3u$1jifj6$1@ID-129890.news.uni-berlin.de...
> Does it quiet down with increased revs? If so this is classic symptom of
> loose timing chain.
>
> "Tunohs" <tom@fiberspec.com> wrote in message
> news:2ceb674c.0402241207.6d2945a1@posting.google.c om...
> > Hey guys and gals, I've got a 92 Wrangler with the 2.5 four banger and
> > it has an annoying rattle coming from the front of the block area. It
> > has 132,000 on the motor and the previous owner was mechanically
> > challenged.
> >
> > I've changed out the rod bearings and oil pump to be safe (the rod
> > bearings didn't show much wear so I just plasti-gaged the mains and
> > they were within specs. Found out there was nothing to adjust on the
> > lifters so now I'm suspecting that there is some slop in the timing
> > chain and or tensioner.
> >
> > Anybody familiar with the replacement of the wearables on the valve
> > timing on these engines? Best place to get replacement parts? Is the
> > tensioner spring over hydraulic or just spring?
> >
> > Thanks for any help.
> >
> > Tom
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.588 / Virus Database: 372 - Release Date: 2/13/2004
>
>