Rattling near transfer case on '00 XJ? Missing bushing?
04-12-2004 | 11:01 AM
#1
Guest
Posts: n/a
Rattling near transfer case on '00 XJ? Missing bushing?
Hi all.
At idle while in drive (stoplights, etc), I have a hollow-sounding
rattle from just under the middle hump in the vehicle. It was
suggested by one person that this is because of a missing or lost rubber
bushing somewhere near the under-vehicle linkage for the transfer case.
That being said, is this something that others have seen and if so, how
easily is this piece fixed or replaced? Otherwise I have no rattles
and this one can be fixed for about 2-3 minutes by pressing the transfer
case lever (commandtrac) forward as far as it will go but after a few
minutes it comes right back.
Can someone possibly shed a bit of light?
thanks
Marc
At idle while in drive (stoplights, etc), I have a hollow-sounding
rattle from just under the middle hump in the vehicle. It was
suggested by one person that this is because of a missing or lost rubber
bushing somewhere near the under-vehicle linkage for the transfer case.
That being said, is this something that others have seen and if so, how
easily is this piece fixed or replaced? Otherwise I have no rattles
and this one can be fixed for about 2-3 minutes by pressing the transfer
case lever (commandtrac) forward as far as it will go but after a few
minutes it comes right back.
Can someone possibly shed a bit of light?
thanks
Marc
04-13-2004 | 08:45 PM
#2
Guest
Posts: n/a
Re: Rattling near transfer case on '00 XJ? Missing bushing?
the rattle is coming from the 4wh. drive shifter bearing and linkage
there is a tsb parts kit to repair this issue it is a common complaint on
the xj
Marc wrote:
> Hi all.
>
> At idle while in drive (stoplights, etc), I have a hollow-sounding
> rattle from just under the middle hump in the vehicle. It was
> suggested by one person that this is because of a missing or lost rubber
> bushing somewhere near the under-vehicle linkage for the transfer case.
>
> That being said, is this something that others have seen and if so, how
> easily is this piece fixed or replaced? Otherwise I have no rattles
> and this one can be fixed for about 2-3 minutes by pressing the transfer
> case lever (commandtrac) forward as far as it will go but after a few
> minutes it comes right back.
>
> Can someone possibly shed a bit of light?
>
> thanks
> Marc
there is a tsb parts kit to repair this issue it is a common complaint on
the xj
Marc wrote:
> Hi all.
>
> At idle while in drive (stoplights, etc), I have a hollow-sounding
> rattle from just under the middle hump in the vehicle. It was
> suggested by one person that this is because of a missing or lost rubber
> bushing somewhere near the under-vehicle linkage for the transfer case.
>
> That being said, is this something that others have seen and if so, how
> easily is this piece fixed or replaced? Otherwise I have no rattles
> and this one can be fixed for about 2-3 minutes by pressing the transfer
> case lever (commandtrac) forward as far as it will go but after a few
> minutes it comes right back.
>
> Can someone possibly shed a bit of light?
>
> thanks
> Marc
04-13-2004 | 08:45 PM
#3
Guest
Posts: n/a
Re: Rattling near transfer case on '00 XJ? Missing bushing?
the rattle is coming from the 4wh. drive shifter bearing and linkage
there is a tsb parts kit to repair this issue it is a common complaint on
the xj
Marc wrote:
> Hi all.
>
> At idle while in drive (stoplights, etc), I have a hollow-sounding
> rattle from just under the middle hump in the vehicle. It was
> suggested by one person that this is because of a missing or lost rubber
> bushing somewhere near the under-vehicle linkage for the transfer case.
>
> That being said, is this something that others have seen and if so, how
> easily is this piece fixed or replaced? Otherwise I have no rattles
> and this one can be fixed for about 2-3 minutes by pressing the transfer
> case lever (commandtrac) forward as far as it will go but after a few
> minutes it comes right back.
>
> Can someone possibly shed a bit of light?
>
> thanks
> Marc
there is a tsb parts kit to repair this issue it is a common complaint on
the xj
Marc wrote:
> Hi all.
>
> At idle while in drive (stoplights, etc), I have a hollow-sounding
> rattle from just under the middle hump in the vehicle. It was
> suggested by one person that this is because of a missing or lost rubber
> bushing somewhere near the under-vehicle linkage for the transfer case.
>
> That being said, is this something that others have seen and if so, how
> easily is this piece fixed or replaced? Otherwise I have no rattles
> and this one can be fixed for about 2-3 minutes by pressing the transfer
> case lever (commandtrac) forward as far as it will go but after a few
> minutes it comes right back.
>
> Can someone possibly shed a bit of light?
>
> thanks
> Marc
04-13-2004 | 08:45 PM
#4
Guest
Posts: n/a
Re: Rattling near transfer case on '00 XJ? Missing bushing?
the rattle is coming from the 4wh. drive shifter bearing and linkage
there is a tsb parts kit to repair this issue it is a common complaint on
the xj
Marc wrote:
> Hi all.
>
> At idle while in drive (stoplights, etc), I have a hollow-sounding
> rattle from just under the middle hump in the vehicle. It was
> suggested by one person that this is because of a missing or lost rubber
> bushing somewhere near the under-vehicle linkage for the transfer case.
>
> That being said, is this something that others have seen and if so, how
> easily is this piece fixed or replaced? Otherwise I have no rattles
> and this one can be fixed for about 2-3 minutes by pressing the transfer
> case lever (commandtrac) forward as far as it will go but after a few
> minutes it comes right back.
>
> Can someone possibly shed a bit of light?
>
> thanks
> Marc
there is a tsb parts kit to repair this issue it is a common complaint on
the xj
Marc wrote:
> Hi all.
>
> At idle while in drive (stoplights, etc), I have a hollow-sounding
> rattle from just under the middle hump in the vehicle. It was
> suggested by one person that this is because of a missing or lost rubber
> bushing somewhere near the under-vehicle linkage for the transfer case.
>
> That being said, is this something that others have seen and if so, how
> easily is this piece fixed or replaced? Otherwise I have no rattles
> and this one can be fixed for about 2-3 minutes by pressing the transfer
> case lever (commandtrac) forward as far as it will go but after a few
> minutes it comes right back.
>
> Can someone possibly shed a bit of light?
>
> thanks
> Marc
04-13-2004 | 08:45 PM
#5
Guest
Posts: n/a
Re: Rattling near transfer case on '00 XJ? Missing bushing?
the rattle is coming from the 4wh. drive shifter bearing and linkage
there is a tsb parts kit to repair this issue it is a common complaint on
the xj
Marc wrote:
> Hi all.
>
> At idle while in drive (stoplights, etc), I have a hollow-sounding
> rattle from just under the middle hump in the vehicle. It was
> suggested by one person that this is because of a missing or lost rubber
> bushing somewhere near the under-vehicle linkage for the transfer case.
>
> That being said, is this something that others have seen and if so, how
> easily is this piece fixed or replaced? Otherwise I have no rattles
> and this one can be fixed for about 2-3 minutes by pressing the transfer
> case lever (commandtrac) forward as far as it will go but after a few
> minutes it comes right back.
>
> Can someone possibly shed a bit of light?
>
> thanks
> Marc
there is a tsb parts kit to repair this issue it is a common complaint on
the xj
Marc wrote:
> Hi all.
>
> At idle while in drive (stoplights, etc), I have a hollow-sounding
> rattle from just under the middle hump in the vehicle. It was
> suggested by one person that this is because of a missing or lost rubber
> bushing somewhere near the under-vehicle linkage for the transfer case.
>
> That being said, is this something that others have seen and if so, how
> easily is this piece fixed or replaced? Otherwise I have no rattles
> and this one can be fixed for about 2-3 minutes by pressing the transfer
> case lever (commandtrac) forward as far as it will go but after a few
> minutes it comes right back.
>
> Can someone possibly shed a bit of light?
>
> thanks
> Marc
04-13-2004 | 10:10 PM
#6
Guest
Posts: n/a
Re: Rattling near transfer case on '00 XJ? Missing bushing?
Hi
thanks for the note; is this 'fix' inside the transfer case or around/on
the linkage connecting the lever on the console to the transfer case?
thanks
Marc
In article <407C7BA1.B32EC812@cac.net>, dbrider@cac.net says...
> the rattle is coming from the 4wh. drive shifter bearing and linkage
> there is a tsb parts kit to repair this issue it is a common complaint on
> the xj
>
> Marc wrote:
>
> > Hi all.
> >
> > At idle while in drive (stoplights, etc), I have a hollow-sounding
> > rattle from just under the middle hump in the vehicle. It was
> > suggested by one person that this is because of a missing or lost rubber
> > bushing somewhere near the under-vehicle linkage for the transfer case.
> >
> > That being said, is this something that others have seen and if so, how
> > easily is this piece fixed or replaced? Otherwise I have no rattles
> > and this one can be fixed for about 2-3 minutes by pressing the transfer
> > case lever (commandtrac) forward as far as it will go but after a few
> > minutes it comes right back.
> >
> > Can someone possibly shed a bit of light?
> >
> > thanks
> > Marc
>
>
thanks for the note; is this 'fix' inside the transfer case or around/on
the linkage connecting the lever on the console to the transfer case?
thanks
Marc
In article <407C7BA1.B32EC812@cac.net>, dbrider@cac.net says...
> the rattle is coming from the 4wh. drive shifter bearing and linkage
> there is a tsb parts kit to repair this issue it is a common complaint on
> the xj
>
> Marc wrote:
>
> > Hi all.
> >
> > At idle while in drive (stoplights, etc), I have a hollow-sounding
> > rattle from just under the middle hump in the vehicle. It was
> > suggested by one person that this is because of a missing or lost rubber
> > bushing somewhere near the under-vehicle linkage for the transfer case.
> >
> > That being said, is this something that others have seen and if so, how
> > easily is this piece fixed or replaced? Otherwise I have no rattles
> > and this one can be fixed for about 2-3 minutes by pressing the transfer
> > case lever (commandtrac) forward as far as it will go but after a few
> > minutes it comes right back.
> >
> > Can someone possibly shed a bit of light?
> >
> > thanks
> > Marc
>
>
04-13-2004 | 10:10 PM
#7
Guest
Posts: n/a
Re: Rattling near transfer case on '00 XJ? Missing bushing?
Hi
thanks for the note; is this 'fix' inside the transfer case or around/on
the linkage connecting the lever on the console to the transfer case?
thanks
Marc
In article <407C7BA1.B32EC812@cac.net>, dbrider@cac.net says...
> the rattle is coming from the 4wh. drive shifter bearing and linkage
> there is a tsb parts kit to repair this issue it is a common complaint on
> the xj
>
> Marc wrote:
>
> > Hi all.
> >
> > At idle while in drive (stoplights, etc), I have a hollow-sounding
> > rattle from just under the middle hump in the vehicle. It was
> > suggested by one person that this is because of a missing or lost rubber
> > bushing somewhere near the under-vehicle linkage for the transfer case.
> >
> > That being said, is this something that others have seen and if so, how
> > easily is this piece fixed or replaced? Otherwise I have no rattles
> > and this one can be fixed for about 2-3 minutes by pressing the transfer
> > case lever (commandtrac) forward as far as it will go but after a few
> > minutes it comes right back.
> >
> > Can someone possibly shed a bit of light?
> >
> > thanks
> > Marc
>
>
thanks for the note; is this 'fix' inside the transfer case or around/on
the linkage connecting the lever on the console to the transfer case?
thanks
Marc
In article <407C7BA1.B32EC812@cac.net>, dbrider@cac.net says...
> the rattle is coming from the 4wh. drive shifter bearing and linkage
> there is a tsb parts kit to repair this issue it is a common complaint on
> the xj
>
> Marc wrote:
>
> > Hi all.
> >
> > At idle while in drive (stoplights, etc), I have a hollow-sounding
> > rattle from just under the middle hump in the vehicle. It was
> > suggested by one person that this is because of a missing or lost rubber
> > bushing somewhere near the under-vehicle linkage for the transfer case.
> >
> > That being said, is this something that others have seen and if so, how
> > easily is this piece fixed or replaced? Otherwise I have no rattles
> > and this one can be fixed for about 2-3 minutes by pressing the transfer
> > case lever (commandtrac) forward as far as it will go but after a few
> > minutes it comes right back.
> >
> > Can someone possibly shed a bit of light?
> >
> > thanks
> > Marc
>
>
04-13-2004 | 10:10 PM
#8
Guest
Posts: n/a
Re: Rattling near transfer case on '00 XJ? Missing bushing?
Hi
thanks for the note; is this 'fix' inside the transfer case or around/on
the linkage connecting the lever on the console to the transfer case?
thanks
Marc
In article <407C7BA1.B32EC812@cac.net>, dbrider@cac.net says...
> the rattle is coming from the 4wh. drive shifter bearing and linkage
> there is a tsb parts kit to repair this issue it is a common complaint on
> the xj
>
> Marc wrote:
>
> > Hi all.
> >
> > At idle while in drive (stoplights, etc), I have a hollow-sounding
> > rattle from just under the middle hump in the vehicle. It was
> > suggested by one person that this is because of a missing or lost rubber
> > bushing somewhere near the under-vehicle linkage for the transfer case.
> >
> > That being said, is this something that others have seen and if so, how
> > easily is this piece fixed or replaced? Otherwise I have no rattles
> > and this one can be fixed for about 2-3 minutes by pressing the transfer
> > case lever (commandtrac) forward as far as it will go but after a few
> > minutes it comes right back.
> >
> > Can someone possibly shed a bit of light?
> >
> > thanks
> > Marc
>
>
thanks for the note; is this 'fix' inside the transfer case or around/on
the linkage connecting the lever on the console to the transfer case?
thanks
Marc
In article <407C7BA1.B32EC812@cac.net>, dbrider@cac.net says...
> the rattle is coming from the 4wh. drive shifter bearing and linkage
> there is a tsb parts kit to repair this issue it is a common complaint on
> the xj
>
> Marc wrote:
>
> > Hi all.
> >
> > At idle while in drive (stoplights, etc), I have a hollow-sounding
> > rattle from just under the middle hump in the vehicle. It was
> > suggested by one person that this is because of a missing or lost rubber
> > bushing somewhere near the under-vehicle linkage for the transfer case.
> >
> > That being said, is this something that others have seen and if so, how
> > easily is this piece fixed or replaced? Otherwise I have no rattles
> > and this one can be fixed for about 2-3 minutes by pressing the transfer
> > case lever (commandtrac) forward as far as it will go but after a few
> > minutes it comes right back.
> >
> > Can someone possibly shed a bit of light?
> >
> > thanks
> > Marc
>
>
04-13-2004 | 10:10 PM
#9
Guest
Posts: n/a
Re: Rattling near transfer case on '00 XJ? Missing bushing?
Hi
thanks for the note; is this 'fix' inside the transfer case or around/on
the linkage connecting the lever on the console to the transfer case?
thanks
Marc
In article <407C7BA1.B32EC812@cac.net>, dbrider@cac.net says...
> the rattle is coming from the 4wh. drive shifter bearing and linkage
> there is a tsb parts kit to repair this issue it is a common complaint on
> the xj
>
> Marc wrote:
>
> > Hi all.
> >
> > At idle while in drive (stoplights, etc), I have a hollow-sounding
> > rattle from just under the middle hump in the vehicle. It was
> > suggested by one person that this is because of a missing or lost rubber
> > bushing somewhere near the under-vehicle linkage for the transfer case.
> >
> > That being said, is this something that others have seen and if so, how
> > easily is this piece fixed or replaced? Otherwise I have no rattles
> > and this one can be fixed for about 2-3 minutes by pressing the transfer
> > case lever (commandtrac) forward as far as it will go but after a few
> > minutes it comes right back.
> >
> > Can someone possibly shed a bit of light?
> >
> > thanks
> > Marc
>
>
thanks for the note; is this 'fix' inside the transfer case or around/on
the linkage connecting the lever on the console to the transfer case?
thanks
Marc
In article <407C7BA1.B32EC812@cac.net>, dbrider@cac.net says...
> the rattle is coming from the 4wh. drive shifter bearing and linkage
> there is a tsb parts kit to repair this issue it is a common complaint on
> the xj
>
> Marc wrote:
>
> > Hi all.
> >
> > At idle while in drive (stoplights, etc), I have a hollow-sounding
> > rattle from just under the middle hump in the vehicle. It was
> > suggested by one person that this is because of a missing or lost rubber
> > bushing somewhere near the under-vehicle linkage for the transfer case.
> >
> > That being said, is this something that others have seen and if so, how
> > easily is this piece fixed or replaced? Otherwise I have no rattles
> > and this one can be fixed for about 2-3 minutes by pressing the transfer
> > case lever (commandtrac) forward as far as it will go but after a few
> > minutes it comes right back.
> >
> > Can someone possibly shed a bit of light?
> >
> > thanks
> > Marc
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)