problem getting cherokee part
08-23-2004 | 09:45 PM
#31
Guest
Posts: n/a
Re: problem getting cherokee part
Good luck.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Stephen wrote:
>
> At this point not much choice. I tried several other places and they
> have them on backorder also. I found one place that will refurb the
> existing one and a couple of places that sell used ones. Seems that
> not a lot of those are held in stock due to the high cost, their being
> very vehicle configuration specific, low failure rate and so on.
>
> stephen
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Stephen wrote:
>
> At this point not much choice. I tried several other places and they
> have them on backorder also. I found one place that will refurb the
> existing one and a couple of places that sell used ones. Seems that
> not a lot of those are held in stock due to the high cost, their being
> very vehicle configuration specific, low failure rate and so on.
>
> stephen
08-23-2004 | 09:45 PM
#32
Guest
Posts: n/a
Re: problem getting cherokee part
Good luck.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Stephen wrote:
>
> At this point not much choice. I tried several other places and they
> have them on backorder also. I found one place that will refurb the
> existing one and a couple of places that sell used ones. Seems that
> not a lot of those are held in stock due to the high cost, their being
> very vehicle configuration specific, low failure rate and so on.
>
> stephen
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Stephen wrote:
>
> At this point not much choice. I tried several other places and they
> have them on backorder also. I found one place that will refurb the
> existing one and a couple of places that sell used ones. Seems that
> not a lot of those are held in stock due to the high cost, their being
> very vehicle configuration specific, low failure rate and so on.
>
> stephen
08-23-2004 | 09:45 PM
#33
Guest
Posts: n/a
Re: problem getting cherokee part
Good luck.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Stephen wrote:
>
> At this point not much choice. I tried several other places and they
> have them on backorder also. I found one place that will refurb the
> existing one and a couple of places that sell used ones. Seems that
> not a lot of those are held in stock due to the high cost, their being
> very vehicle configuration specific, low failure rate and so on.
>
> stephen
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Stephen wrote:
>
> At this point not much choice. I tried several other places and they
> have them on backorder also. I found one place that will refurb the
> existing one and a couple of places that sell used ones. Seems that
> not a lot of those are held in stock due to the high cost, their being
> very vehicle configuration specific, low failure rate and so on.
>
> stephen
08-23-2004 | 10:01 PM
#34
Guest
Posts: n/a
Re: problem getting cherokee part
the part is vin specific and also skim code specific but a drb can be
used to reset the module but a dealer has to do it
Stephen wrote:
> I have a 99 cherokee that would not start. The dealer says the power
> train control module needs to be replaced. There are some issues in
> getting the part. They say the part is VIN specific. Does anyone know
> if this is true? Is there somewhere other than chrysler where I could
> get the part?
>
> thanks
> stephen
used to reset the module but a dealer has to do it
Stephen wrote:
> I have a 99 cherokee that would not start. The dealer says the power
> train control module needs to be replaced. There are some issues in
> getting the part. They say the part is VIN specific. Does anyone know
> if this is true? Is there somewhere other than chrysler where I could
> get the part?
>
> thanks
> stephen
08-23-2004 | 10:01 PM
#35
Guest
Posts: n/a
Re: problem getting cherokee part
the part is vin specific and also skim code specific but a drb can be
used to reset the module but a dealer has to do it
Stephen wrote:
> I have a 99 cherokee that would not start. The dealer says the power
> train control module needs to be replaced. There are some issues in
> getting the part. They say the part is VIN specific. Does anyone know
> if this is true? Is there somewhere other than chrysler where I could
> get the part?
>
> thanks
> stephen
used to reset the module but a dealer has to do it
Stephen wrote:
> I have a 99 cherokee that would not start. The dealer says the power
> train control module needs to be replaced. There are some issues in
> getting the part. They say the part is VIN specific. Does anyone know
> if this is true? Is there somewhere other than chrysler where I could
> get the part?
>
> thanks
> stephen
08-23-2004 | 10:01 PM
#36
Guest
Posts: n/a
Re: problem getting cherokee part
the part is vin specific and also skim code specific but a drb can be
used to reset the module but a dealer has to do it
Stephen wrote:
> I have a 99 cherokee that would not start. The dealer says the power
> train control module needs to be replaced. There are some issues in
> getting the part. They say the part is VIN specific. Does anyone know
> if this is true? Is there somewhere other than chrysler where I could
> get the part?
>
> thanks
> stephen
used to reset the module but a dealer has to do it
Stephen wrote:
> I have a 99 cherokee that would not start. The dealer says the power
> train control module needs to be replaced. There are some issues in
> getting the part. They say the part is VIN specific. Does anyone know
> if this is true? Is there somewhere other than chrysler where I could
> get the part?
>
> thanks
> stephen
08-23-2004 | 10:01 PM
#37
Guest
Posts: n/a
Re: problem getting cherokee part
the part is vin specific and also skim code specific but a drb can be
used to reset the module but a dealer has to do it
Stephen wrote:
> I have a 99 cherokee that would not start. The dealer says the power
> train control module needs to be replaced. There are some issues in
> getting the part. They say the part is VIN specific. Does anyone know
> if this is true? Is there somewhere other than chrysler where I could
> get the part?
>
> thanks
> stephen
used to reset the module but a dealer has to do it
Stephen wrote:
> I have a 99 cherokee that would not start. The dealer says the power
> train control module needs to be replaced. There are some issues in
> getting the part. They say the part is VIN specific. Does anyone know
> if this is true? Is there somewhere other than chrysler where I could
> get the part?
>
> thanks
> stephen
08-24-2004 | 09:26 PM
#38
Guest
Posts: n/a
Re: problem getting cherokee part
On Mon, 23 Aug 2004 18:45:32 -0700, L.W.(ßill) ------ III
<----------@***.net> wrote:
>! Good luck.
Well, the dealer got the part today. The problem is/was with chrysler.
The only thing they got correct was that the dealer ordered the part
when he said he did. After that everything chrysler told me and the
dealer was wrong. Several times chrysler said the part had been
shipped and it would be in in a couple of days. Each time the dealer
contacted someone they work with at ups and ups said chrysler had not
given them the part yet. At one point chyrsler said the part was in
the same city as the dealer and should be at the dealer that day.
Accroding to the dealer and ups chrysler had still not given the part
to ups. On Monday the dealer tracked the part down. It was in
Milwaukee and ups was going to overnight it. Chrysler at this point
had no idea where the part was. According to the dealer this was a
different distribution center than chrysler said it was being shipped
from. Chrysler also promised to call me as soon as they found the
part. As far as I know they are still looking for it.
<----------@***.net> wrote:
>! Good luck.
Well, the dealer got the part today. The problem is/was with chrysler.
The only thing they got correct was that the dealer ordered the part
when he said he did. After that everything chrysler told me and the
dealer was wrong. Several times chrysler said the part had been
shipped and it would be in in a couple of days. Each time the dealer
contacted someone they work with at ups and ups said chrysler had not
given them the part yet. At one point chyrsler said the part was in
the same city as the dealer and should be at the dealer that day.
Accroding to the dealer and ups chrysler had still not given the part
to ups. On Monday the dealer tracked the part down. It was in
Milwaukee and ups was going to overnight it. Chrysler at this point
had no idea where the part was. According to the dealer this was a
different distribution center than chrysler said it was being shipped
from. Chrysler also promised to call me as soon as they found the
part. As far as I know they are still looking for it.
08-24-2004 | 09:26 PM
#39
Guest
Posts: n/a
Re: problem getting cherokee part
On Mon, 23 Aug 2004 18:45:32 -0700, L.W.(ßill) ------ III
<----------@***.net> wrote:
>! Good luck.
Well, the dealer got the part today. The problem is/was with chrysler.
The only thing they got correct was that the dealer ordered the part
when he said he did. After that everything chrysler told me and the
dealer was wrong. Several times chrysler said the part had been
shipped and it would be in in a couple of days. Each time the dealer
contacted someone they work with at ups and ups said chrysler had not
given them the part yet. At one point chyrsler said the part was in
the same city as the dealer and should be at the dealer that day.
Accroding to the dealer and ups chrysler had still not given the part
to ups. On Monday the dealer tracked the part down. It was in
Milwaukee and ups was going to overnight it. Chrysler at this point
had no idea where the part was. According to the dealer this was a
different distribution center than chrysler said it was being shipped
from. Chrysler also promised to call me as soon as they found the
part. As far as I know they are still looking for it.
<----------@***.net> wrote:
>! Good luck.
Well, the dealer got the part today. The problem is/was with chrysler.
The only thing they got correct was that the dealer ordered the part
when he said he did. After that everything chrysler told me and the
dealer was wrong. Several times chrysler said the part had been
shipped and it would be in in a couple of days. Each time the dealer
contacted someone they work with at ups and ups said chrysler had not
given them the part yet. At one point chyrsler said the part was in
the same city as the dealer and should be at the dealer that day.
Accroding to the dealer and ups chrysler had still not given the part
to ups. On Monday the dealer tracked the part down. It was in
Milwaukee and ups was going to overnight it. Chrysler at this point
had no idea where the part was. According to the dealer this was a
different distribution center than chrysler said it was being shipped
from. Chrysler also promised to call me as soon as they found the
part. As far as I know they are still looking for it.
08-24-2004 | 09:26 PM
#40
Guest
Posts: n/a
Re: problem getting cherokee part
On Mon, 23 Aug 2004 18:45:32 -0700, L.W.(ßill) ------ III
<----------@***.net> wrote:
>! Good luck.
Well, the dealer got the part today. The problem is/was with chrysler.
The only thing they got correct was that the dealer ordered the part
when he said he did. After that everything chrysler told me and the
dealer was wrong. Several times chrysler said the part had been
shipped and it would be in in a couple of days. Each time the dealer
contacted someone they work with at ups and ups said chrysler had not
given them the part yet. At one point chyrsler said the part was in
the same city as the dealer and should be at the dealer that day.
Accroding to the dealer and ups chrysler had still not given the part
to ups. On Monday the dealer tracked the part down. It was in
Milwaukee and ups was going to overnight it. Chrysler at this point
had no idea where the part was. According to the dealer this was a
different distribution center than chrysler said it was being shipped
from. Chrysler also promised to call me as soon as they found the
part. As far as I know they are still looking for it.
<----------@***.net> wrote:
>! Good luck.
Well, the dealer got the part today. The problem is/was with chrysler.
The only thing they got correct was that the dealer ordered the part
when he said he did. After that everything chrysler told me and the
dealer was wrong. Several times chrysler said the part had been
shipped and it would be in in a couple of days. Each time the dealer
contacted someone they work with at ups and ups said chrysler had not
given them the part yet. At one point chyrsler said the part was in
the same city as the dealer and should be at the dealer that day.
Accroding to the dealer and ups chrysler had still not given the part
to ups. On Monday the dealer tracked the part down. It was in
Milwaukee and ups was going to overnight it. Chrysler at this point
had no idea where the part was. According to the dealer this was a
different distribution center than chrysler said it was being shipped
from. Chrysler also promised to call me as soon as they found the
part. As far as I know they are still looking for it.