|
Re: Plugging A/T lines on replacement TJ radiator???
You would, of course, cool the return line which operates at atmospheric.
-- jeff Earle Horton wrote: > I believe that PS operates at a higher pressure than AT. I am not sure that > the radiator AT cooler could take it. If he wants to find out let us > know... > > Earle > > "billy ray" <billy_ray@SPAMfuse.net> wrote in message > news:5639f$45c354b0$422afc51$2078@FUSE.NET... >> Why bother, just leave them alone as they are not open to the radiator >> coolant. >> >> You might consider using them for a power steering cooler though.. >> >> >> "Mike Romain" <romainm@sympatico.ca> wrote in message >> news:45c34f40$0$2949$9a6e19ea@unlimited.newshostin g.com... >>> The rubber boots work. >>> >>> You can just go get a threaded plug for the holes too. I 'think' they > are >>> standard pipe threads. >>> >>> Mike >>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >>> 88 Cherokee 235 BFG AT's >>> Canadian Off Road Trips Photos: Non members can still view! >>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >>> (More Off Road album links at bottom of the view page) >>> >>> john.malaska@verizon.net wrote: >>>> Hope someone can help me here. >>>> >>>> I made the mistake of ordering a replacement radiator my `97 TJ from an >>>> online parts supplier. Stupid! >>>> >>>> The repl radiator has brass or copper fittings to attach automatic >>>> transmission lines to, but I have a 5-spd. (OEM doesn't have those >>>> fittings/openings.) >>>> >>>> Rather than going thru the aggravation of returning it, can anyone >>>> recommend a good way to block off those A/T fittings? Repl didn't come >>>> with any plugs, other than rubber boots that fit over each of the >>>> fittings. >>>> >>>> Thanks >>>> JohnM >> > > |
Re: Plugging A/T lines on replacement TJ radiator???
The high pressure side operates in the area of 1500-1800 psi and requires
special high pressure hoses with tapered fittings. The low pressure side uses standard oil resistant hose and has only a simple spring clamp to prevent it from falling off. "Earle Horton" <apodo@gracioso.usa> wrote in message news:DoWdnXf8stQN-V7YnZ2dnUVZ_v2nnZ2d@comcast.com... >I believe that PS operates at a higher pressure than AT. I am not sure >that > the radiator AT cooler could take it. If he wants to find out let us > know... > > Earle > > "billy ray" <billy_ray@SPAMfuse.net> wrote in message > news:5639f$45c354b0$422afc51$2078@FUSE.NET... >> Why bother, just leave them alone as they are not open to the radiator >> coolant. >> >> You might consider using them for a power steering cooler though.. >> >> >> "Mike Romain" <romainm@sympatico.ca> wrote in message >> news:45c34f40$0$2949$9a6e19ea@unlimited.newshostin g.com... >> > The rubber boots work. >> > >> > You can just go get a threaded plug for the holes too. I 'think' they > are >> > standard pipe threads. >> > >> > Mike >> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> > 88 Cherokee 235 BFG AT's >> > Canadian Off Road Trips Photos: Non members can still view! >> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >> > (More Off Road album links at bottom of the view page) >> > >> > john.malaska@verizon.net wrote: >> >> Hope someone can help me here. >> >> >> >> I made the mistake of ordering a replacement radiator my `97 TJ from >> >> an >> >> online parts supplier. Stupid! >> >> >> >> The repl radiator has brass or copper fittings to attach automatic >> >> transmission lines to, but I have a 5-spd. (OEM doesn't have those >> >> fittings/openings.) >> >> >> >> Rather than going thru the aggravation of returning it, can anyone >> >> recommend a good way to block off those A/T fittings? Repl didn't come >> >> with any plugs, other than rubber boots that fit over each of the >> >> fittings. >> >> >> >> Thanks >> >> JohnM >> >> > > |
Re: Plugging A/T lines on replacement TJ radiator???
The high pressure side operates in the area of 1500-1800 psi and requires
special high pressure hoses with tapered fittings. The low pressure side uses standard oil resistant hose and has only a simple spring clamp to prevent it from falling off. "Earle Horton" <apodo@gracioso.usa> wrote in message news:DoWdnXf8stQN-V7YnZ2dnUVZ_v2nnZ2d@comcast.com... >I believe that PS operates at a higher pressure than AT. I am not sure >that > the radiator AT cooler could take it. If he wants to find out let us > know... > > Earle > > "billy ray" <billy_ray@SPAMfuse.net> wrote in message > news:5639f$45c354b0$422afc51$2078@FUSE.NET... >> Why bother, just leave them alone as they are not open to the radiator >> coolant. >> >> You might consider using them for a power steering cooler though.. >> >> >> "Mike Romain" <romainm@sympatico.ca> wrote in message >> news:45c34f40$0$2949$9a6e19ea@unlimited.newshostin g.com... >> > The rubber boots work. >> > >> > You can just go get a threaded plug for the holes too. I 'think' they > are >> > standard pipe threads. >> > >> > Mike >> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> > 88 Cherokee 235 BFG AT's >> > Canadian Off Road Trips Photos: Non members can still view! >> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >> > (More Off Road album links at bottom of the view page) >> > >> > john.malaska@verizon.net wrote: >> >> Hope someone can help me here. >> >> >> >> I made the mistake of ordering a replacement radiator my `97 TJ from >> >> an >> >> online parts supplier. Stupid! >> >> >> >> The repl radiator has brass or copper fittings to attach automatic >> >> transmission lines to, but I have a 5-spd. (OEM doesn't have those >> >> fittings/openings.) >> >> >> >> Rather than going thru the aggravation of returning it, can anyone >> >> recommend a good way to block off those A/T fittings? Repl didn't come >> >> with any plugs, other than rubber boots that fit over each of the >> >> fittings. >> >> >> >> Thanks >> >> JohnM >> >> > > |
Re: Plugging A/T lines on replacement TJ radiator???
The high pressure side operates in the area of 1500-1800 psi and requires
special high pressure hoses with tapered fittings. The low pressure side uses standard oil resistant hose and has only a simple spring clamp to prevent it from falling off. "Earle Horton" <apodo@gracioso.usa> wrote in message news:DoWdnXf8stQN-V7YnZ2dnUVZ_v2nnZ2d@comcast.com... >I believe that PS operates at a higher pressure than AT. I am not sure >that > the radiator AT cooler could take it. If he wants to find out let us > know... > > Earle > > "billy ray" <billy_ray@SPAMfuse.net> wrote in message > news:5639f$45c354b0$422afc51$2078@FUSE.NET... >> Why bother, just leave them alone as they are not open to the radiator >> coolant. >> >> You might consider using them for a power steering cooler though.. >> >> >> "Mike Romain" <romainm@sympatico.ca> wrote in message >> news:45c34f40$0$2949$9a6e19ea@unlimited.newshostin g.com... >> > The rubber boots work. >> > >> > You can just go get a threaded plug for the holes too. I 'think' they > are >> > standard pipe threads. >> > >> > Mike >> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> > 88 Cherokee 235 BFG AT's >> > Canadian Off Road Trips Photos: Non members can still view! >> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >> > (More Off Road album links at bottom of the view page) >> > >> > john.malaska@verizon.net wrote: >> >> Hope someone can help me here. >> >> >> >> I made the mistake of ordering a replacement radiator my `97 TJ from >> >> an >> >> online parts supplier. Stupid! >> >> >> >> The repl radiator has brass or copper fittings to attach automatic >> >> transmission lines to, but I have a 5-spd. (OEM doesn't have those >> >> fittings/openings.) >> >> >> >> Rather than going thru the aggravation of returning it, can anyone >> >> recommend a good way to block off those A/T fittings? Repl didn't come >> >> with any plugs, other than rubber boots that fit over each of the >> >> fittings. >> >> >> >> Thanks >> >> JohnM >> >> > > |
Re: Plugging A/T lines on replacement TJ radiator???
The high pressure side operates in the area of 1500-1800 psi and requires
special high pressure hoses with tapered fittings. The low pressure side uses standard oil resistant hose and has only a simple spring clamp to prevent it from falling off. "Earle Horton" <apodo@gracioso.usa> wrote in message news:DoWdnXf8stQN-V7YnZ2dnUVZ_v2nnZ2d@comcast.com... >I believe that PS operates at a higher pressure than AT. I am not sure >that > the radiator AT cooler could take it. If he wants to find out let us > know... > > Earle > > "billy ray" <billy_ray@SPAMfuse.net> wrote in message > news:5639f$45c354b0$422afc51$2078@FUSE.NET... >> Why bother, just leave them alone as they are not open to the radiator >> coolant. >> >> You might consider using them for a power steering cooler though.. >> >> >> "Mike Romain" <romainm@sympatico.ca> wrote in message >> news:45c34f40$0$2949$9a6e19ea@unlimited.newshostin g.com... >> > The rubber boots work. >> > >> > You can just go get a threaded plug for the holes too. I 'think' they > are >> > standard pipe threads. >> > >> > Mike >> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> > 88 Cherokee 235 BFG AT's >> > Canadian Off Road Trips Photos: Non members can still view! >> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >> > (More Off Road album links at bottom of the view page) >> > >> > john.malaska@verizon.net wrote: >> >> Hope someone can help me here. >> >> >> >> I made the mistake of ordering a replacement radiator my `97 TJ from >> >> an >> >> online parts supplier. Stupid! >> >> >> >> The repl radiator has brass or copper fittings to attach automatic >> >> transmission lines to, but I have a 5-spd. (OEM doesn't have those >> >> fittings/openings.) >> >> >> >> Rather than going thru the aggravation of returning it, can anyone >> >> recommend a good way to block off those A/T fittings? Repl didn't come >> >> with any plugs, other than rubber boots that fit over each of the >> >> fittings. >> >> >> >> Thanks >> >> JohnM >> >> > > |
Re: Plugging A/T lines on replacement TJ radiator???
The low side is bigger around than the radiator tank ATF cooler though. Now
what you are contemplating is a restriction more than it is a cooler. Earle "billy ray" <billy_ray@SPAMfuse.net> wrote in message news:12de2$45c36f84$422afc51$8627@FUSE.NET... > The high pressure side operates in the area of 1500-1800 psi and requires > special high pressure hoses with tapered fittings. > > The low pressure side uses standard oil resistant hose and has only a > simple spring clamp to prevent it from falling off. > > > "Earle Horton" <apodo@gracioso.usa> wrote in message > news:DoWdnXf8stQN-V7YnZ2dnUVZ_v2nnZ2d@comcast.com... > >I believe that PS operates at a higher pressure than AT. I am not sure > >that > > the radiator AT cooler could take it. If he wants to find out let us > > know... > > > > Earle > > > > "billy ray" <billy_ray@SPAMfuse.net> wrote in message > > news:5639f$45c354b0$422afc51$2078@FUSE.NET... > >> Why bother, just leave them alone as they are not open to the radiator > >> coolant. > >> > >> You might consider using them for a power steering cooler though.. > >> > >> > >> "Mike Romain" <romainm@sympatico.ca> wrote in message > >> news:45c34f40$0$2949$9a6e19ea@unlimited.newshostin g.com... > >> > The rubber boots work. > >> > > >> > You can just go get a threaded plug for the holes too. I 'think' they > > are > >> > standard pipe threads. > >> > > >> > Mike > >> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > >> > 88 Cherokee 235 BFG AT's > >> > Canadian Off Road Trips Photos: Non members can still view! > >> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > >> > (More Off Road album links at bottom of the view page) > >> > > >> > john.malaska@verizon.net wrote: > >> >> Hope someone can help me here. > >> >> > >> >> I made the mistake of ordering a replacement radiator my `97 TJ from > >> >> an > >> >> online parts supplier. Stupid! > >> >> > >> >> The repl radiator has brass or copper fittings to attach automatic > >> >> transmission lines to, but I have a 5-spd. (OEM doesn't have those > >> >> fittings/openings.) > >> >> > >> >> Rather than going thru the aggravation of returning it, can anyone > >> >> recommend a good way to block off those A/T fittings? Repl didn't come > >> >> with any plugs, other than rubber boots that fit over each of the > >> >> fittings. > >> >> > >> >> Thanks > >> >> JohnM > >> > >> > > > > > > |
Re: Plugging A/T lines on replacement TJ radiator???
The low side is bigger around than the radiator tank ATF cooler though. Now
what you are contemplating is a restriction more than it is a cooler. Earle "billy ray" <billy_ray@SPAMfuse.net> wrote in message news:12de2$45c36f84$422afc51$8627@FUSE.NET... > The high pressure side operates in the area of 1500-1800 psi and requires > special high pressure hoses with tapered fittings. > > The low pressure side uses standard oil resistant hose and has only a > simple spring clamp to prevent it from falling off. > > > "Earle Horton" <apodo@gracioso.usa> wrote in message > news:DoWdnXf8stQN-V7YnZ2dnUVZ_v2nnZ2d@comcast.com... > >I believe that PS operates at a higher pressure than AT. I am not sure > >that > > the radiator AT cooler could take it. If he wants to find out let us > > know... > > > > Earle > > > > "billy ray" <billy_ray@SPAMfuse.net> wrote in message > > news:5639f$45c354b0$422afc51$2078@FUSE.NET... > >> Why bother, just leave them alone as they are not open to the radiator > >> coolant. > >> > >> You might consider using them for a power steering cooler though.. > >> > >> > >> "Mike Romain" <romainm@sympatico.ca> wrote in message > >> news:45c34f40$0$2949$9a6e19ea@unlimited.newshostin g.com... > >> > The rubber boots work. > >> > > >> > You can just go get a threaded plug for the holes too. I 'think' they > > are > >> > standard pipe threads. > >> > > >> > Mike > >> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > >> > 88 Cherokee 235 BFG AT's > >> > Canadian Off Road Trips Photos: Non members can still view! > >> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > >> > (More Off Road album links at bottom of the view page) > >> > > >> > john.malaska@verizon.net wrote: > >> >> Hope someone can help me here. > >> >> > >> >> I made the mistake of ordering a replacement radiator my `97 TJ from > >> >> an > >> >> online parts supplier. Stupid! > >> >> > >> >> The repl radiator has brass or copper fittings to attach automatic > >> >> transmission lines to, but I have a 5-spd. (OEM doesn't have those > >> >> fittings/openings.) > >> >> > >> >> Rather than going thru the aggravation of returning it, can anyone > >> >> recommend a good way to block off those A/T fittings? Repl didn't come > >> >> with any plugs, other than rubber boots that fit over each of the > >> >> fittings. > >> >> > >> >> Thanks > >> >> JohnM > >> > >> > > > > > > |
Re: Plugging A/T lines on replacement TJ radiator???
The low side is bigger around than the radiator tank ATF cooler though. Now
what you are contemplating is a restriction more than it is a cooler. Earle "billy ray" <billy_ray@SPAMfuse.net> wrote in message news:12de2$45c36f84$422afc51$8627@FUSE.NET... > The high pressure side operates in the area of 1500-1800 psi and requires > special high pressure hoses with tapered fittings. > > The low pressure side uses standard oil resistant hose and has only a > simple spring clamp to prevent it from falling off. > > > "Earle Horton" <apodo@gracioso.usa> wrote in message > news:DoWdnXf8stQN-V7YnZ2dnUVZ_v2nnZ2d@comcast.com... > >I believe that PS operates at a higher pressure than AT. I am not sure > >that > > the radiator AT cooler could take it. If he wants to find out let us > > know... > > > > Earle > > > > "billy ray" <billy_ray@SPAMfuse.net> wrote in message > > news:5639f$45c354b0$422afc51$2078@FUSE.NET... > >> Why bother, just leave them alone as they are not open to the radiator > >> coolant. > >> > >> You might consider using them for a power steering cooler though.. > >> > >> > >> "Mike Romain" <romainm@sympatico.ca> wrote in message > >> news:45c34f40$0$2949$9a6e19ea@unlimited.newshostin g.com... > >> > The rubber boots work. > >> > > >> > You can just go get a threaded plug for the holes too. I 'think' they > > are > >> > standard pipe threads. > >> > > >> > Mike > >> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > >> > 88 Cherokee 235 BFG AT's > >> > Canadian Off Road Trips Photos: Non members can still view! > >> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > >> > (More Off Road album links at bottom of the view page) > >> > > >> > john.malaska@verizon.net wrote: > >> >> Hope someone can help me here. > >> >> > >> >> I made the mistake of ordering a replacement radiator my `97 TJ from > >> >> an > >> >> online parts supplier. Stupid! > >> >> > >> >> The repl radiator has brass or copper fittings to attach automatic > >> >> transmission lines to, but I have a 5-spd. (OEM doesn't have those > >> >> fittings/openings.) > >> >> > >> >> Rather than going thru the aggravation of returning it, can anyone > >> >> recommend a good way to block off those A/T fittings? Repl didn't come > >> >> with any plugs, other than rubber boots that fit over each of the > >> >> fittings. > >> >> > >> >> Thanks > >> >> JohnM > >> > >> > > > > > > |
Re: Plugging A/T lines on replacement TJ radiator???
The low side is bigger around than the radiator tank ATF cooler though. Now
what you are contemplating is a restriction more than it is a cooler. Earle "billy ray" <billy_ray@SPAMfuse.net> wrote in message news:12de2$45c36f84$422afc51$8627@FUSE.NET... > The high pressure side operates in the area of 1500-1800 psi and requires > special high pressure hoses with tapered fittings. > > The low pressure side uses standard oil resistant hose and has only a > simple spring clamp to prevent it from falling off. > > > "Earle Horton" <apodo@gracioso.usa> wrote in message > news:DoWdnXf8stQN-V7YnZ2dnUVZ_v2nnZ2d@comcast.com... > >I believe that PS operates at a higher pressure than AT. I am not sure > >that > > the radiator AT cooler could take it. If he wants to find out let us > > know... > > > > Earle > > > > "billy ray" <billy_ray@SPAMfuse.net> wrote in message > > news:5639f$45c354b0$422afc51$2078@FUSE.NET... > >> Why bother, just leave them alone as they are not open to the radiator > >> coolant. > >> > >> You might consider using them for a power steering cooler though.. > >> > >> > >> "Mike Romain" <romainm@sympatico.ca> wrote in message > >> news:45c34f40$0$2949$9a6e19ea@unlimited.newshostin g.com... > >> > The rubber boots work. > >> > > >> > You can just go get a threaded plug for the holes too. I 'think' they > > are > >> > standard pipe threads. > >> > > >> > Mike > >> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > >> > 88 Cherokee 235 BFG AT's > >> > Canadian Off Road Trips Photos: Non members can still view! > >> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > >> > (More Off Road album links at bottom of the view page) > >> > > >> > john.malaska@verizon.net wrote: > >> >> Hope someone can help me here. > >> >> > >> >> I made the mistake of ordering a replacement radiator my `97 TJ from > >> >> an > >> >> online parts supplier. Stupid! > >> >> > >> >> The repl radiator has brass or copper fittings to attach automatic > >> >> transmission lines to, but I have a 5-spd. (OEM doesn't have those > >> >> fittings/openings.) > >> >> > >> >> Rather than going thru the aggravation of returning it, can anyone > >> >> recommend a good way to block off those A/T fittings? Repl didn't come > >> >> with any plugs, other than rubber boots that fit over each of the > >> >> fittings. > >> >> > >> >> Thanks > >> >> JohnM > >> > >> > > > > > > |
Re: Plugging A/T lines on replacement TJ radiator???
Earle Horton wrote:
> I believe that PS operates at a higher pressure than AT. I am not > sure that the radiator AT cooler could take it. If he wants to find > out let us know... Long as you use the return side pressure wouldn't be an issue, but actually it's going to heat the fluid up more than it cools it down. I'd just put a couple of plugs in there and be done with it. > "billy ray" wrote ... >> Why bother, just leave them alone as they are not open to the >> radiator coolant. >> >> You might consider using them for a power steering cooler though.. >> >> >> "Mike Romain" wrote... >>> The rubber boots work. >>> >>> You can just go get a threaded plug for the holes too. I 'think' >>> they are standard pipe threads. |
| All times are GMT -4. The time now is 01:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands