NEED rubber seal for Girling Clutch Slave Cylinder CJ with AMC 150
03-16-2007 | 08:52 PM
#1
Guest
Posts: n/a
NEED rubber seal for Girling Clutch Slave Cylinder CJ with AMC 150
The Girling clutch slave cylinder on my CJ5, 1981 with the AMC 150
four-banger engine is Jeep Part #52000070. Inside the cylinder ther are only
two parts, a metal pison and a rubber seal that follows the piston in and
out. I want just the rubber seal that goes on the piston but can not find
one anywhere. I dont want to pay $70 for a new unit as the bore and piston
is in fine shape. Only the rubber seal is worn.
Can anyone direct me to a source for this seal OR
if its not available is there any treatment I can give the rubber to swell
it or such? I have tried silicone paste but that had no effect. The leak is
sligh. Needs bleeding every week or two.
Michael
four-banger engine is Jeep Part #52000070. Inside the cylinder ther are only
two parts, a metal pison and a rubber seal that follows the piston in and
out. I want just the rubber seal that goes on the piston but can not find
one anywhere. I dont want to pay $70 for a new unit as the bore and piston
is in fine shape. Only the rubber seal is worn.
Can anyone direct me to a source for this seal OR
if its not available is there any treatment I can give the rubber to swell
it or such? I have tried silicone paste but that had no effect. The leak is
sligh. Needs bleeding every week or two.
Michael
03-16-2007 | 10:45 PM
#2
Guest
Posts: n/a
Re: NEED rubber seal for Girling Clutch Slave Cylinder CJ with AMC 150
Just go to your mom and pop brake shop/jobber in your town, they have
bins full of cups by size like yours marked maybe 5/8", for about ten cents.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
news:45fb2dd3$0$27077$4c368faf@roadrunner.com...
> The Girling clutch slave cylinder on my CJ5, 1981 with the AMC 150
> four-banger engine is Jeep Part #52000070. Inside the cylinder ther are
only
> two parts, a metal pison and a rubber seal that follows the piston in and
> out. I want just the rubber seal that goes on the piston but can not find
> one anywhere. I dont want to pay $70 for a new unit as the bore and piston
> is in fine shape. Only the rubber seal is worn.
> Can anyone direct me to a source for this seal OR
> if its not available is there any treatment I can give the rubber to swell
> it or such? I have tried silicone paste but that had no effect. The leak
is
> sligh. Needs bleeding every week or two.
>
> Michael
>
>
--
Posted via a free Usenet account from http://www.teranews.com
bins full of cups by size like yours marked maybe 5/8", for about ten cents.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
news:45fb2dd3$0$27077$4c368faf@roadrunner.com...
> The Girling clutch slave cylinder on my CJ5, 1981 with the AMC 150
> four-banger engine is Jeep Part #52000070. Inside the cylinder ther are
only
> two parts, a metal pison and a rubber seal that follows the piston in and
> out. I want just the rubber seal that goes on the piston but can not find
> one anywhere. I dont want to pay $70 for a new unit as the bore and piston
> is in fine shape. Only the rubber seal is worn.
> Can anyone direct me to a source for this seal OR
> if its not available is there any treatment I can give the rubber to swell
> it or such? I have tried silicone paste but that had no effect. The leak
is
> sligh. Needs bleeding every week or two.
>
> Michael
>
>
--
Posted via a free Usenet account from http://www.teranews.com
03-16-2007 | 10:45 PM
#3
Guest
Posts: n/a
Re: NEED rubber seal for Girling Clutch Slave Cylinder CJ with AMC 150
Just go to your mom and pop brake shop/jobber in your town, they have
bins full of cups by size like yours marked maybe 5/8", for about ten cents.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
news:45fb2dd3$0$27077$4c368faf@roadrunner.com...
> The Girling clutch slave cylinder on my CJ5, 1981 with the AMC 150
> four-banger engine is Jeep Part #52000070. Inside the cylinder ther are
only
> two parts, a metal pison and a rubber seal that follows the piston in and
> out. I want just the rubber seal that goes on the piston but can not find
> one anywhere. I dont want to pay $70 for a new unit as the bore and piston
> is in fine shape. Only the rubber seal is worn.
> Can anyone direct me to a source for this seal OR
> if its not available is there any treatment I can give the rubber to swell
> it or such? I have tried silicone paste but that had no effect. The leak
is
> sligh. Needs bleeding every week or two.
>
> Michael
>
>
--
Posted via a free Usenet account from http://www.teranews.com
bins full of cups by size like yours marked maybe 5/8", for about ten cents.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
news:45fb2dd3$0$27077$4c368faf@roadrunner.com...
> The Girling clutch slave cylinder on my CJ5, 1981 with the AMC 150
> four-banger engine is Jeep Part #52000070. Inside the cylinder ther are
only
> two parts, a metal pison and a rubber seal that follows the piston in and
> out. I want just the rubber seal that goes on the piston but can not find
> one anywhere. I dont want to pay $70 for a new unit as the bore and piston
> is in fine shape. Only the rubber seal is worn.
> Can anyone direct me to a source for this seal OR
> if its not available is there any treatment I can give the rubber to swell
> it or such? I have tried silicone paste but that had no effect. The leak
is
> sligh. Needs bleeding every week or two.
>
> Michael
>
>
--
Posted via a free Usenet account from http://www.teranews.com
03-16-2007 | 10:45 PM
#4
Guest
Posts: n/a
Re: NEED rubber seal for Girling Clutch Slave Cylinder CJ with AMC 150
Just go to your mom and pop brake shop/jobber in your town, they have
bins full of cups by size like yours marked maybe 5/8", for about ten cents.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
news:45fb2dd3$0$27077$4c368faf@roadrunner.com...
> The Girling clutch slave cylinder on my CJ5, 1981 with the AMC 150
> four-banger engine is Jeep Part #52000070. Inside the cylinder ther are
only
> two parts, a metal pison and a rubber seal that follows the piston in and
> out. I want just the rubber seal that goes on the piston but can not find
> one anywhere. I dont want to pay $70 for a new unit as the bore and piston
> is in fine shape. Only the rubber seal is worn.
> Can anyone direct me to a source for this seal OR
> if its not available is there any treatment I can give the rubber to swell
> it or such? I have tried silicone paste but that had no effect. The leak
is
> sligh. Needs bleeding every week or two.
>
> Michael
>
>
--
Posted via a free Usenet account from http://www.teranews.com
bins full of cups by size like yours marked maybe 5/8", for about ten cents.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
news:45fb2dd3$0$27077$4c368faf@roadrunner.com...
> The Girling clutch slave cylinder on my CJ5, 1981 with the AMC 150
> four-banger engine is Jeep Part #52000070. Inside the cylinder ther are
only
> two parts, a metal pison and a rubber seal that follows the piston in and
> out. I want just the rubber seal that goes on the piston but can not find
> one anywhere. I dont want to pay $70 for a new unit as the bore and piston
> is in fine shape. Only the rubber seal is worn.
> Can anyone direct me to a source for this seal OR
> if its not available is there any treatment I can give the rubber to swell
> it or such? I have tried silicone paste but that had no effect. The leak
is
> sligh. Needs bleeding every week or two.
>
> Michael
>
>
--
Posted via a free Usenet account from http://www.teranews.com
03-17-2007 | 03:42 PM
#5
Guest
Posts: n/a
Re: NEED rubber seal for Girling Clutch Slave Cylinder CJ with AMC 150
And God Bless You too Bill. Thanks.
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45fb2ddf$0$16329$88260bb3@free.teranews.com.. .
> Just go to your mom and pop brake shop/jobber in your town, they have
> bins full of cups by size like yours marked maybe 5/8", for about ten
> cents.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
> news:45fb2dd3$0$27077$4c368faf@roadrunner.com...
>> The Girling clutch slave cylinder on my CJ5, 1981 with the AMC 150
>> four-banger engine is Jeep Part #52000070. Inside the cylinder ther are
> only
>> two parts, a metal pison and a rubber seal that follows the piston in and
>> out. I want just the rubber seal that goes on the piston but can not find
>> one anywhere. I dont want to pay $70 for a new unit as the bore and
>> piston
>> is in fine shape. Only the rubber seal is worn.
>> Can anyone direct me to a source for this seal OR
>> if its not available is there any treatment I can give the rubber to
>> swell
>> it or such? I have tried silicone paste but that had no effect. The leak
> is
>> sligh. Needs bleeding every week or two.
>>
>> Michael
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45fb2ddf$0$16329$88260bb3@free.teranews.com.. .
> Just go to your mom and pop brake shop/jobber in your town, they have
> bins full of cups by size like yours marked maybe 5/8", for about ten
> cents.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
> news:45fb2dd3$0$27077$4c368faf@roadrunner.com...
>> The Girling clutch slave cylinder on my CJ5, 1981 with the AMC 150
>> four-banger engine is Jeep Part #52000070. Inside the cylinder ther are
> only
>> two parts, a metal pison and a rubber seal that follows the piston in and
>> out. I want just the rubber seal that goes on the piston but can not find
>> one anywhere. I dont want to pay $70 for a new unit as the bore and
>> piston
>> is in fine shape. Only the rubber seal is worn.
>> Can anyone direct me to a source for this seal OR
>> if its not available is there any treatment I can give the rubber to
>> swell
>> it or such? I have tried silicone paste but that had no effect. The leak
> is
>> sligh. Needs bleeding every week or two.
>>
>> Michael
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
03-17-2007 | 03:42 PM
#6
Guest
Posts: n/a
Re: NEED rubber seal for Girling Clutch Slave Cylinder CJ with AMC 150
And God Bless You too Bill. Thanks.
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45fb2ddf$0$16329$88260bb3@free.teranews.com.. .
> Just go to your mom and pop brake shop/jobber in your town, they have
> bins full of cups by size like yours marked maybe 5/8", for about ten
> cents.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
> news:45fb2dd3$0$27077$4c368faf@roadrunner.com...
>> The Girling clutch slave cylinder on my CJ5, 1981 with the AMC 150
>> four-banger engine is Jeep Part #52000070. Inside the cylinder ther are
> only
>> two parts, a metal pison and a rubber seal that follows the piston in and
>> out. I want just the rubber seal that goes on the piston but can not find
>> one anywhere. I dont want to pay $70 for a new unit as the bore and
>> piston
>> is in fine shape. Only the rubber seal is worn.
>> Can anyone direct me to a source for this seal OR
>> if its not available is there any treatment I can give the rubber to
>> swell
>> it or such? I have tried silicone paste but that had no effect. The leak
> is
>> sligh. Needs bleeding every week or two.
>>
>> Michael
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45fb2ddf$0$16329$88260bb3@free.teranews.com.. .
> Just go to your mom and pop brake shop/jobber in your town, they have
> bins full of cups by size like yours marked maybe 5/8", for about ten
> cents.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
> news:45fb2dd3$0$27077$4c368faf@roadrunner.com...
>> The Girling clutch slave cylinder on my CJ5, 1981 with the AMC 150
>> four-banger engine is Jeep Part #52000070. Inside the cylinder ther are
> only
>> two parts, a metal pison and a rubber seal that follows the piston in and
>> out. I want just the rubber seal that goes on the piston but can not find
>> one anywhere. I dont want to pay $70 for a new unit as the bore and
>> piston
>> is in fine shape. Only the rubber seal is worn.
>> Can anyone direct me to a source for this seal OR
>> if its not available is there any treatment I can give the rubber to
>> swell
>> it or such? I have tried silicone paste but that had no effect. The leak
> is
>> sligh. Needs bleeding every week or two.
>>
>> Michael
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
03-17-2007 | 03:42 PM
#7
Guest
Posts: n/a
Re: NEED rubber seal for Girling Clutch Slave Cylinder CJ with AMC 150
And God Bless You too Bill. Thanks.
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45fb2ddf$0$16329$88260bb3@free.teranews.com.. .
> Just go to your mom and pop brake shop/jobber in your town, they have
> bins full of cups by size like yours marked maybe 5/8", for about ten
> cents.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
> news:45fb2dd3$0$27077$4c368faf@roadrunner.com...
>> The Girling clutch slave cylinder on my CJ5, 1981 with the AMC 150
>> four-banger engine is Jeep Part #52000070. Inside the cylinder ther are
> only
>> two parts, a metal pison and a rubber seal that follows the piston in and
>> out. I want just the rubber seal that goes on the piston but can not find
>> one anywhere. I dont want to pay $70 for a new unit as the bore and
>> piston
>> is in fine shape. Only the rubber seal is worn.
>> Can anyone direct me to a source for this seal OR
>> if its not available is there any treatment I can give the rubber to
>> swell
>> it or such? I have tried silicone paste but that had no effect. The leak
> is
>> sligh. Needs bleeding every week or two.
>>
>> Michael
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45fb2ddf$0$16329$88260bb3@free.teranews.com.. .
> Just go to your mom and pop brake shop/jobber in your town, they have
> bins full of cups by size like yours marked maybe 5/8", for about ten
> cents.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
> news:45fb2dd3$0$27077$4c368faf@roadrunner.com...
>> The Girling clutch slave cylinder on my CJ5, 1981 with the AMC 150
>> four-banger engine is Jeep Part #52000070. Inside the cylinder ther are
> only
>> two parts, a metal pison and a rubber seal that follows the piston in and
>> out. I want just the rubber seal that goes on the piston but can not find
>> one anywhere. I dont want to pay $70 for a new unit as the bore and
>> piston
>> is in fine shape. Only the rubber seal is worn.
>> Can anyone direct me to a source for this seal OR
>> if its not available is there any treatment I can give the rubber to
>> swell
>> it or such? I have tried silicone paste but that had no effect. The leak
> is
>> sligh. Needs bleeding every week or two.
>>
>> Michael
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
Thread
Thread Starter
Forum
Replies
Last Post
William Oliveri
Jeep Mailing List
84
01-19-2004 03:41 PM
Simon Juncal
Jeep Mailing List
12
11-30-2003 09:41 PM
Simon Juncal
Jeep Mailing List
0
11-29-2003 03:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)