NAPA plug wires good to suppress radio noise?
07-28-2005 | 04:00 PM
#1
Guest
Posts: n/a
NAPA plug wires good to suppress radio noise?
I have a 1980 Jeep CJ-5, V-8 engine. I just use it at my vacation cabin.
I have terrible ignition noise on the am radio. I have replaced the plugs,
rotor, and distributor cap. I have not replaced the plug wires.
There is a NAPA dealer in the nearby town. Does NAPA sell a basic good set
of plug wires, that is effective in radio noise suppression??
I know I can call NAPA and ask, but I prefer to get input from other persons
that would have first-hand knowledge about this sort of thing.
Thanks for any help !!
--James--
07-28-2005 | 04:52 PM
#2
Guest
Posts: n/a
Re: NAPA plug wires good to suppress radio noise?
check main ground, radio ground and antenna ground before changing the plug
wires
"James Nipper" <lists@jamesnipper.com> wrote in message
news:11eidm4jdv7t946@corp.supernews.com...
>
>
> I have a 1980 Jeep CJ-5, V-8 engine. I just use it at my vacation
cabin.
>
> I have terrible ignition noise on the am radio. I have replaced the plugs,
> rotor, and distributor cap. I have not replaced the plug wires.
>
> There is a NAPA dealer in the nearby town. Does NAPA sell a basic good
set
> of plug wires, that is effective in radio noise suppression??
>
> I know I can call NAPA and ask, but I prefer to get input from other
persons
> that would have first-hand knowledge about this sort of thing.
>
> Thanks for any help !!
>
> --James--
>
>
wires
"James Nipper" <lists@jamesnipper.com> wrote in message
news:11eidm4jdv7t946@corp.supernews.com...
>
>
> I have a 1980 Jeep CJ-5, V-8 engine. I just use it at my vacation
cabin.
>
> I have terrible ignition noise on the am radio. I have replaced the plugs,
> rotor, and distributor cap. I have not replaced the plug wires.
>
> There is a NAPA dealer in the nearby town. Does NAPA sell a basic good
set
> of plug wires, that is effective in radio noise suppression??
>
> I know I can call NAPA and ask, but I prefer to get input from other
persons
> that would have first-hand knowledge about this sort of thing.
>
> Thanks for any help !!
>
> --James--
>
>
07-28-2005 | 04:52 PM
#3
Guest
Posts: n/a
Re: NAPA plug wires good to suppress radio noise?
check main ground, radio ground and antenna ground before changing the plug
wires
"James Nipper" <lists@jamesnipper.com> wrote in message
news:11eidm4jdv7t946@corp.supernews.com...
>
>
> I have a 1980 Jeep CJ-5, V-8 engine. I just use it at my vacation
cabin.
>
> I have terrible ignition noise on the am radio. I have replaced the plugs,
> rotor, and distributor cap. I have not replaced the plug wires.
>
> There is a NAPA dealer in the nearby town. Does NAPA sell a basic good
set
> of plug wires, that is effective in radio noise suppression??
>
> I know I can call NAPA and ask, but I prefer to get input from other
persons
> that would have first-hand knowledge about this sort of thing.
>
> Thanks for any help !!
>
> --James--
>
>
wires
"James Nipper" <lists@jamesnipper.com> wrote in message
news:11eidm4jdv7t946@corp.supernews.com...
>
>
> I have a 1980 Jeep CJ-5, V-8 engine. I just use it at my vacation
cabin.
>
> I have terrible ignition noise on the am radio. I have replaced the plugs,
> rotor, and distributor cap. I have not replaced the plug wires.
>
> There is a NAPA dealer in the nearby town. Does NAPA sell a basic good
set
> of plug wires, that is effective in radio noise suppression??
>
> I know I can call NAPA and ask, but I prefer to get input from other
persons
> that would have first-hand knowledge about this sort of thing.
>
> Thanks for any help !!
>
> --James--
>
>
07-28-2005 | 04:52 PM
#4
Guest
Posts: n/a
Re: NAPA plug wires good to suppress radio noise?
check main ground, radio ground and antenna ground before changing the plug
wires
"James Nipper" <lists@jamesnipper.com> wrote in message
news:11eidm4jdv7t946@corp.supernews.com...
>
>
> I have a 1980 Jeep CJ-5, V-8 engine. I just use it at my vacation
cabin.
>
> I have terrible ignition noise on the am radio. I have replaced the plugs,
> rotor, and distributor cap. I have not replaced the plug wires.
>
> There is a NAPA dealer in the nearby town. Does NAPA sell a basic good
set
> of plug wires, that is effective in radio noise suppression??
>
> I know I can call NAPA and ask, but I prefer to get input from other
persons
> that would have first-hand knowledge about this sort of thing.
>
> Thanks for any help !!
>
> --James--
>
>
wires
"James Nipper" <lists@jamesnipper.com> wrote in message
news:11eidm4jdv7t946@corp.supernews.com...
>
>
> I have a 1980 Jeep CJ-5, V-8 engine. I just use it at my vacation
cabin.
>
> I have terrible ignition noise on the am radio. I have replaced the plugs,
> rotor, and distributor cap. I have not replaced the plug wires.
>
> There is a NAPA dealer in the nearby town. Does NAPA sell a basic good
set
> of plug wires, that is effective in radio noise suppression??
>
> I know I can call NAPA and ask, but I prefer to get input from other
persons
> that would have first-hand knowledge about this sort of thing.
>
> Thanks for any help !!
>
> --James--
>
>
07-28-2005 | 04:52 PM
#5
Guest
Posts: n/a
Re: NAPA plug wires good to suppress radio noise?
check main ground, radio ground and antenna ground before changing the plug
wires
"James Nipper" <lists@jamesnipper.com> wrote in message
news:11eidm4jdv7t946@corp.supernews.com...
>
>
> I have a 1980 Jeep CJ-5, V-8 engine. I just use it at my vacation
cabin.
>
> I have terrible ignition noise on the am radio. I have replaced the plugs,
> rotor, and distributor cap. I have not replaced the plug wires.
>
> There is a NAPA dealer in the nearby town. Does NAPA sell a basic good
set
> of plug wires, that is effective in radio noise suppression??
>
> I know I can call NAPA and ask, but I prefer to get input from other
persons
> that would have first-hand knowledge about this sort of thing.
>
> Thanks for any help !!
>
> --James--
>
>
wires
"James Nipper" <lists@jamesnipper.com> wrote in message
news:11eidm4jdv7t946@corp.supernews.com...
>
>
> I have a 1980 Jeep CJ-5, V-8 engine. I just use it at my vacation
cabin.
>
> I have terrible ignition noise on the am radio. I have replaced the plugs,
> rotor, and distributor cap. I have not replaced the plug wires.
>
> There is a NAPA dealer in the nearby town. Does NAPA sell a basic good
set
> of plug wires, that is effective in radio noise suppression??
>
> I know I can call NAPA and ask, but I prefer to get input from other
persons
> that would have first-hand knowledge about this sort of thing.
>
> Thanks for any help !!
>
> --James--
>
>
07-28-2005 | 05:03 PM
#6
Guest
Posts: n/a
Re: NAPA plug wires good to suppress radio noise?
I like to buy my plug wire on the roll, and use the resistor terminal.
Usually if you use the resistor plug in a vehicle with a steel firewall
and hood you get little noise.
Are you sure it's ignition noise and not the alternator?
NAPA people generally don't know their *** from a hole in the ground,
although there are exceptions.
Usually if you use the resistor plug in a vehicle with a steel firewall
and hood you get little noise.
Are you sure it's ignition noise and not the alternator?
NAPA people generally don't know their *** from a hole in the ground,
although there are exceptions.
07-28-2005 | 05:03 PM
#7
Guest
Posts: n/a
Re: NAPA plug wires good to suppress radio noise?
I like to buy my plug wire on the roll, and use the resistor terminal.
Usually if you use the resistor plug in a vehicle with a steel firewall
and hood you get little noise.
Are you sure it's ignition noise and not the alternator?
NAPA people generally don't know their *** from a hole in the ground,
although there are exceptions.
Usually if you use the resistor plug in a vehicle with a steel firewall
and hood you get little noise.
Are you sure it's ignition noise and not the alternator?
NAPA people generally don't know their *** from a hole in the ground,
although there are exceptions.
07-28-2005 | 05:03 PM
#8
Guest
Posts: n/a
Re: NAPA plug wires good to suppress radio noise?
I like to buy my plug wire on the roll, and use the resistor terminal.
Usually if you use the resistor plug in a vehicle with a steel firewall
and hood you get little noise.
Are you sure it's ignition noise and not the alternator?
NAPA people generally don't know their *** from a hole in the ground,
although there are exceptions.
Usually if you use the resistor plug in a vehicle with a steel firewall
and hood you get little noise.
Are you sure it's ignition noise and not the alternator?
NAPA people generally don't know their *** from a hole in the ground,
although there are exceptions.
07-28-2005 | 05:03 PM
#9
Guest
Posts: n/a
Re: NAPA plug wires good to suppress radio noise?
I like to buy my plug wire on the roll, and use the resistor terminal.
Usually if you use the resistor plug in a vehicle with a steel firewall
and hood you get little noise.
Are you sure it's ignition noise and not the alternator?
NAPA people generally don't know their *** from a hole in the ground,
although there are exceptions.
Usually if you use the resistor plug in a vehicle with a steel firewall
and hood you get little noise.
Are you sure it's ignition noise and not the alternator?
NAPA people generally don't know their *** from a hole in the ground,
although there are exceptions.
07-28-2005 | 05:05 PM
#10
Guest
Posts: n/a
Re: NAPA plug wires good to suppress radio noise?
First, make sure your spark plugs have an 'R' in their model number.
That means they are a resistor type spark plug that reduces radio
ignition noise without reducing spark output in a significant way.
For spark plug wires, make sure to avoid ANY ignition wiring sets that
brag about low resistance since that is, like on the spark plugs, needed
to suppress AM radio noise. Due to how wiring and Ohm's law works, the
resistance needed in ignition wiring and spark plugs to eliminate
ignition noise in an AM radio does not significantly reduce the spark
intensity. There is so little current flowing through ignition wiring
that even the normal high-resistance in ignition wiring does not
significantly reduce the voltage. And don't worry, that extra
resistance is PURPOSELY added to the wiring... it costs more to make it
that way than it would with lower resistance wiring.
So go with standard carbon-impregnated ignition wiring sets and avoid at
all costs any so-called "performance" ignition wiring set that talks
about its lower resistance even if it also says it has some lame
"spiral-wrap" technology to reduce noise.
Using standard resistance-type spark plugs and ignition wiring should
take care of your ignition noise in your AM radio.
Jerry
James Nipper wrote:
> I have a 1980 Jeep CJ-5, V-8 engine. I just use it at my vacation cabin.
>
> I have terrible ignition noise on the am radio. I have replaced the plugs,
> rotor, and distributor cap. I have not replaced the plug wires.
>
> There is a NAPA dealer in the nearby town. Does NAPA sell a basic good set
> of plug wires, that is effective in radio noise suppression??
>
> I know I can call NAPA and ask, but I prefer to get input from other persons
> that would have first-hand knowledge about this sort of thing.
>
> Thanks for any help !!
>
> --James--
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
That means they are a resistor type spark plug that reduces radio
ignition noise without reducing spark output in a significant way.
For spark plug wires, make sure to avoid ANY ignition wiring sets that
brag about low resistance since that is, like on the spark plugs, needed
to suppress AM radio noise. Due to how wiring and Ohm's law works, the
resistance needed in ignition wiring and spark plugs to eliminate
ignition noise in an AM radio does not significantly reduce the spark
intensity. There is so little current flowing through ignition wiring
that even the normal high-resistance in ignition wiring does not
significantly reduce the voltage. And don't worry, that extra
resistance is PURPOSELY added to the wiring... it costs more to make it
that way than it would with lower resistance wiring.
So go with standard carbon-impregnated ignition wiring sets and avoid at
all costs any so-called "performance" ignition wiring set that talks
about its lower resistance even if it also says it has some lame
"spiral-wrap" technology to reduce noise.
Using standard resistance-type spark plugs and ignition wiring should
take care of your ignition noise in your AM radio.
Jerry
James Nipper wrote:
> I have a 1980 Jeep CJ-5, V-8 engine. I just use it at my vacation cabin.
>
> I have terrible ignition noise on the am radio. I have replaced the plugs,
> rotor, and distributor cap. I have not replaced the plug wires.
>
> There is a NAPA dealer in the nearby town. Does NAPA sell a basic good set
> of plug wires, that is effective in radio noise suppression??
>
> I know I can call NAPA and ask, but I prefer to get input from other persons
> that would have first-hand knowledge about this sort of thing.
>
> Thanks for any help !!
>
> --James--
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/