Jeep Grand Cherokee 4.0L Throttle Body Spacer/Intake Compatibility
09-28-2004 | 04:49 PM
#1
Guest
Posts: n/a
Jeep Grand Cherokee 4.0L Throttle Body Spacer/Intake Compatibility
Is there an aftermarket air intake system that is compatible with a
throttle body spacer on the 4.0L engine? I would like to use a K&N
FIPK, but it will not work with a throttle body spacer. I have a
throttle body spacer and a homemade intake right now, but I would like
something that has a heat shield. Any help would be appreciated!
throttle body spacer on the 4.0L engine? I would like to use a K&N
FIPK, but it will not work with a throttle body spacer. I have a
throttle body spacer and a homemade intake right now, but I would like
something that has a heat shield. Any help would be appreciated!
09-28-2004 | 05:12 PM
#2
Guest
Posts: n/a
Re: Jeep Grand Cherokee 4.0L Throttle Body Spacer/Intake Compatibility
I hope you want this strictly for looks because a K&N and FIPK won't help
performance on a Jeep 4.0L engine one iota. Really, no kidding.
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Brian" <berichsen@gmail.com> wrote in message
news:1ca2260e.0409281249.30983721@posting.google.c om...
> Is there an aftermarket air intake system that is compatible with a
> throttle body spacer on the 4.0L engine? I would like to use a K&N
> FIPK, but it will not work with a throttle body spacer. I have a
> throttle body spacer and a homemade intake right now, but I would like
> something that has a heat shield. Any help would be appreciated!
performance on a Jeep 4.0L engine one iota. Really, no kidding.
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Brian" <berichsen@gmail.com> wrote in message
news:1ca2260e.0409281249.30983721@posting.google.c om...
> Is there an aftermarket air intake system that is compatible with a
> throttle body spacer on the 4.0L engine? I would like to use a K&N
> FIPK, but it will not work with a throttle body spacer. I have a
> throttle body spacer and a homemade intake right now, but I would like
> something that has a heat shield. Any help would be appreciated!
09-28-2004 | 05:12 PM
#3
Guest
Posts: n/a
Re: Jeep Grand Cherokee 4.0L Throttle Body Spacer/Intake Compatibility
I hope you want this strictly for looks because a K&N and FIPK won't help
performance on a Jeep 4.0L engine one iota. Really, no kidding.
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Brian" <berichsen@gmail.com> wrote in message
news:1ca2260e.0409281249.30983721@posting.google.c om...
> Is there an aftermarket air intake system that is compatible with a
> throttle body spacer on the 4.0L engine? I would like to use a K&N
> FIPK, but it will not work with a throttle body spacer. I have a
> throttle body spacer and a homemade intake right now, but I would like
> something that has a heat shield. Any help would be appreciated!
performance on a Jeep 4.0L engine one iota. Really, no kidding.
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Brian" <berichsen@gmail.com> wrote in message
news:1ca2260e.0409281249.30983721@posting.google.c om...
> Is there an aftermarket air intake system that is compatible with a
> throttle body spacer on the 4.0L engine? I would like to use a K&N
> FIPK, but it will not work with a throttle body spacer. I have a
> throttle body spacer and a homemade intake right now, but I would like
> something that has a heat shield. Any help would be appreciated!
09-28-2004 | 05:12 PM
#4
Guest
Posts: n/a
Re: Jeep Grand Cherokee 4.0L Throttle Body Spacer/Intake Compatibility
I hope you want this strictly for looks because a K&N and FIPK won't help
performance on a Jeep 4.0L engine one iota. Really, no kidding.
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Brian" <berichsen@gmail.com> wrote in message
news:1ca2260e.0409281249.30983721@posting.google.c om...
> Is there an aftermarket air intake system that is compatible with a
> throttle body spacer on the 4.0L engine? I would like to use a K&N
> FIPK, but it will not work with a throttle body spacer. I have a
> throttle body spacer and a homemade intake right now, but I would like
> something that has a heat shield. Any help would be appreciated!
performance on a Jeep 4.0L engine one iota. Really, no kidding.
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Brian" <berichsen@gmail.com> wrote in message
news:1ca2260e.0409281249.30983721@posting.google.c om...
> Is there an aftermarket air intake system that is compatible with a
> throttle body spacer on the 4.0L engine? I would like to use a K&N
> FIPK, but it will not work with a throttle body spacer. I have a
> throttle body spacer and a homemade intake right now, but I would like
> something that has a heat shield. Any help would be appreciated!
09-28-2004 | 05:18 PM
#5
Guest
Posts: n/a
Re: Jeep Grand Cherokee 4.0L Throttle Body Spacer/Intake Compatibility
The dust that would normally clog a paper filter, will blow right
through the K&N, which is OK if you're sponsered by them, and they will
buy your engine after the Baja one thousand. Your spacer is nothing but
snake oil, actually decreases the Cubic Feet per Minute throttle body
was capable of.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Brian wrote:
>
> Is there an aftermarket air intake system that is compatible with a
> throttle body spacer on the 4.0L engine? I would like to use a K&N
> FIPK, but it will not work with a throttle body spacer. I have a
> throttle body spacer and a homemade intake right now, but I would like
> something that has a heat shield. Any help would be appreciated!
through the K&N, which is OK if you're sponsered by them, and they will
buy your engine after the Baja one thousand. Your spacer is nothing but
snake oil, actually decreases the Cubic Feet per Minute throttle body
was capable of.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Brian wrote:
>
> Is there an aftermarket air intake system that is compatible with a
> throttle body spacer on the 4.0L engine? I would like to use a K&N
> FIPK, but it will not work with a throttle body spacer. I have a
> throttle body spacer and a homemade intake right now, but I would like
> something that has a heat shield. Any help would be appreciated!
09-28-2004 | 05:18 PM
#6
Guest
Posts: n/a
Re: Jeep Grand Cherokee 4.0L Throttle Body Spacer/Intake Compatibility
The dust that would normally clog a paper filter, will blow right
through the K&N, which is OK if you're sponsered by them, and they will
buy your engine after the Baja one thousand. Your spacer is nothing but
snake oil, actually decreases the Cubic Feet per Minute throttle body
was capable of.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Brian wrote:
>
> Is there an aftermarket air intake system that is compatible with a
> throttle body spacer on the 4.0L engine? I would like to use a K&N
> FIPK, but it will not work with a throttle body spacer. I have a
> throttle body spacer and a homemade intake right now, but I would like
> something that has a heat shield. Any help would be appreciated!
through the K&N, which is OK if you're sponsered by them, and they will
buy your engine after the Baja one thousand. Your spacer is nothing but
snake oil, actually decreases the Cubic Feet per Minute throttle body
was capable of.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Brian wrote:
>
> Is there an aftermarket air intake system that is compatible with a
> throttle body spacer on the 4.0L engine? I would like to use a K&N
> FIPK, but it will not work with a throttle body spacer. I have a
> throttle body spacer and a homemade intake right now, but I would like
> something that has a heat shield. Any help would be appreciated!
09-28-2004 | 05:18 PM
#7
Guest
Posts: n/a
Re: Jeep Grand Cherokee 4.0L Throttle Body Spacer/Intake Compatibility
The dust that would normally clog a paper filter, will blow right
through the K&N, which is OK if you're sponsered by them, and they will
buy your engine after the Baja one thousand. Your spacer is nothing but
snake oil, actually decreases the Cubic Feet per Minute throttle body
was capable of.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Brian wrote:
>
> Is there an aftermarket air intake system that is compatible with a
> throttle body spacer on the 4.0L engine? I would like to use a K&N
> FIPK, but it will not work with a throttle body spacer. I have a
> throttle body spacer and a homemade intake right now, but I would like
> something that has a heat shield. Any help would be appreciated!
through the K&N, which is OK if you're sponsered by them, and they will
buy your engine after the Baja one thousand. Your spacer is nothing but
snake oil, actually decreases the Cubic Feet per Minute throttle body
was capable of.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Brian wrote:
>
> Is there an aftermarket air intake system that is compatible with a
> throttle body spacer on the 4.0L engine? I would like to use a K&N
> FIPK, but it will not work with a throttle body spacer. I have a
> throttle body spacer and a homemade intake right now, but I would like
> something that has a heat shield. Any help would be appreciated!
09-28-2004 | 06:14 PM
#8
Guest
Posts: n/a
Re: Jeep Grand Cherokee 4.0L Throttle Body Spacer/Intake Compatibility
The red ones are pretty, though. :-)
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:krk6d.27$mS1.3@fed1read05...
> I hope you want this strictly for looks because a K&N and FIPK won't help
> performance on a Jeep 4.0L engine one iota. Really, no kidding.
>
> Jerry
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
> "Brian" <berichsen@gmail.com> wrote in message
> news:1ca2260e.0409281249.30983721@posting.google.c om...
> > Is there an aftermarket air intake system that is compatible with a
> > throttle body spacer on the 4.0L engine? I would like to use a K&N
> > FIPK, but it will not work with a throttle body spacer. I have a
> > throttle body spacer and a homemade intake right now, but I would like
> > something that has a heat shield. Any help would be appreciated!
>
>
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:krk6d.27$mS1.3@fed1read05...
> I hope you want this strictly for looks because a K&N and FIPK won't help
> performance on a Jeep 4.0L engine one iota. Really, no kidding.
>
> Jerry
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
> "Brian" <berichsen@gmail.com> wrote in message
> news:1ca2260e.0409281249.30983721@posting.google.c om...
> > Is there an aftermarket air intake system that is compatible with a
> > throttle body spacer on the 4.0L engine? I would like to use a K&N
> > FIPK, but it will not work with a throttle body spacer. I have a
> > throttle body spacer and a homemade intake right now, but I would like
> > something that has a heat shield. Any help would be appreciated!
>
>
09-28-2004 | 06:14 PM
#9
Guest
Posts: n/a
Re: Jeep Grand Cherokee 4.0L Throttle Body Spacer/Intake Compatibility
The red ones are pretty, though. :-)
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:krk6d.27$mS1.3@fed1read05...
> I hope you want this strictly for looks because a K&N and FIPK won't help
> performance on a Jeep 4.0L engine one iota. Really, no kidding.
>
> Jerry
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
> "Brian" <berichsen@gmail.com> wrote in message
> news:1ca2260e.0409281249.30983721@posting.google.c om...
> > Is there an aftermarket air intake system that is compatible with a
> > throttle body spacer on the 4.0L engine? I would like to use a K&N
> > FIPK, but it will not work with a throttle body spacer. I have a
> > throttle body spacer and a homemade intake right now, but I would like
> > something that has a heat shield. Any help would be appreciated!
>
>
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:krk6d.27$mS1.3@fed1read05...
> I hope you want this strictly for looks because a K&N and FIPK won't help
> performance on a Jeep 4.0L engine one iota. Really, no kidding.
>
> Jerry
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
> "Brian" <berichsen@gmail.com> wrote in message
> news:1ca2260e.0409281249.30983721@posting.google.c om...
> > Is there an aftermarket air intake system that is compatible with a
> > throttle body spacer on the 4.0L engine? I would like to use a K&N
> > FIPK, but it will not work with a throttle body spacer. I have a
> > throttle body spacer and a homemade intake right now, but I would like
> > something that has a heat shield. Any help would be appreciated!
>
>
09-28-2004 | 06:14 PM
#10
Guest
Posts: n/a
Re: Jeep Grand Cherokee 4.0L Throttle Body Spacer/Intake Compatibility
The red ones are pretty, though. :-)
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:krk6d.27$mS1.3@fed1read05...
> I hope you want this strictly for looks because a K&N and FIPK won't help
> performance on a Jeep 4.0L engine one iota. Really, no kidding.
>
> Jerry
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
> "Brian" <berichsen@gmail.com> wrote in message
> news:1ca2260e.0409281249.30983721@posting.google.c om...
> > Is there an aftermarket air intake system that is compatible with a
> > throttle body spacer on the 4.0L engine? I would like to use a K&N
> > FIPK, but it will not work with a throttle body spacer. I have a
> > throttle body spacer and a homemade intake right now, but I would like
> > something that has a heat shield. Any help would be appreciated!
>
>
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:krk6d.27$mS1.3@fed1read05...
> I hope you want this strictly for looks because a K&N and FIPK won't help
> performance on a Jeep 4.0L engine one iota. Really, no kidding.
>
> Jerry
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
> "Brian" <berichsen@gmail.com> wrote in message
> news:1ca2260e.0409281249.30983721@posting.google.c om...
> > Is there an aftermarket air intake system that is compatible with a
> > throttle body spacer on the 4.0L engine? I would like to use a K&N
> > FIPK, but it will not work with a throttle body spacer. I have a
> > throttle body spacer and a homemade intake right now, but I would like
> > something that has a heat shield. Any help would be appreciated!
>
>