Hey everyone,

89 YJ, 4.2

Rear driveshaft blew out of the Jeep, and a bolt got stuck well enough that
I need it on a lift to get it out...

I have a buddy with a shop about 5 km's away, will my transfer case make it
that far? The fluid spills everywhere when I try to drive it, so that
worries me.. alot...

Regards,
Chris

 

One if these YJ guys will chime in for you, but if I were in your shoes I
would not drive far at all. I believe you can cut the top off a coke can
and affix it to your rear output shaft and hold in the oil for a short time.
Or can you have your buddy pull you that far?


"Christian Fry" <fry_christian@hotmail.com> wrote in message
news:9KJ0c.2940$i_2.28776@news20.bellglobal.com...
> Hey everyone,
>
> 89 YJ, 4.2
>
> Rear driveshaft blew out of the Jeep, and a bolt got stuck well enough
that
> I need it on a lift to get it out...
>
> I have a buddy with a shop about 5 km's away, will my transfer case make
it
> that far? The fluid spills everywhere when I try to drive it, so that
> worries me.. alot...
>
> Regards,
> Chris
>
>

 

One if these YJ guys will chime in for you, but if I were in your shoes I
would not drive far at all. I believe you can cut the top off a coke can
and affix it to your rear output shaft and hold in the oil for a short time.
Or can you have your buddy pull you that far?


"Christian Fry" <fry_christian@hotmail.com> wrote in message
news:9KJ0c.2940$i_2.28776@news20.bellglobal.com...
> Hey everyone,
>
> 89 YJ, 4.2
>
> Rear driveshaft blew out of the Jeep, and a bolt got stuck well enough
that
> I need it on a lift to get it out...
>
> I have a buddy with a shop about 5 km's away, will my transfer case make
it
> that far? The fluid spills everywhere when I try to drive it, so that
> worries me.. alot...
>
> Regards,
> Chris
>
>

 

One if these YJ guys will chime in for you, but if I were in your shoes I
would not drive far at all. I believe you can cut the top off a coke can
and affix it to your rear output shaft and hold in the oil for a short time.
Or can you have your buddy pull you that far?


"Christian Fry" <fry_christian@hotmail.com> wrote in message
news:9KJ0c.2940$i_2.28776@news20.bellglobal.com...
> Hey everyone,
>
> 89 YJ, 4.2
>
> Rear driveshaft blew out of the Jeep, and a bolt got stuck well enough
that
> I need it on a lift to get it out...
>
> I have a buddy with a shop about 5 km's away, will my transfer case make
it
> that far? The fluid spills everywhere when I try to drive it, so that
> worries me.. alot...
>
> Regards,
> Chris
>
>

 

Yeah, I'll get it on a float. It's a heavily patrolled area by the ministry,
so it's not worth risking the chain.

I'll just have to wait the few hours until my buddy isn't busy!

Thanks,
Chris

"fletcher" <none@nowhere.com> wrote in message
news:mAK0c.131001$j55.124773@fe05.usenetserver.com ...
> One if these YJ guys will chime in for you, but if I were in your shoes I
> would not drive far at all. I believe you can cut the top off a coke can
> and affix it to your rear output shaft and hold in the oil for a short
time.
> Or can you have your buddy pull you that far?
>
>
> "Christian Fry" <fry_christian@hotmail.com> wrote in message
> news:9KJ0c.2940$i_2.28776@news20.bellglobal.com...
> > Hey everyone,
> >
> > 89 YJ, 4.2
> >
> > Rear driveshaft blew out of the Jeep, and a bolt got stuck well enough
> that
> > I need it on a lift to get it out...
> >
> > I have a buddy with a shop about 5 km's away, will my transfer case make
> it
> > that far? The fluid spills everywhere when I try to drive it, so that
> > worries me.. alot...
> >
> > Regards,
> > Chris
> >
> >
>
>
>

 

Yeah, I'll get it on a float. It's a heavily patrolled area by the ministry,
so it's not worth risking the chain.

I'll just have to wait the few hours until my buddy isn't busy!

Thanks,
Chris

"fletcher" <none@nowhere.com> wrote in message
news:mAK0c.131001$j55.124773@fe05.usenetserver.com ...
> One if these YJ guys will chime in for you, but if I were in your shoes I
> would not drive far at all. I believe you can cut the top off a coke can
> and affix it to your rear output shaft and hold in the oil for a short
time.
> Or can you have your buddy pull you that far?
>
>
> "Christian Fry" <fry_christian@hotmail.com> wrote in message
> news:9KJ0c.2940$i_2.28776@news20.bellglobal.com...
> > Hey everyone,
> >
> > 89 YJ, 4.2
> >
> > Rear driveshaft blew out of the Jeep, and a bolt got stuck well enough
> that
> > I need it on a lift to get it out...
> >
> > I have a buddy with a shop about 5 km's away, will my transfer case make
> it
> > that far? The fluid spills everywhere when I try to drive it, so that
> > worries me.. alot...
> >
> > Regards,
> > Chris
> >
> >
>
>
>

 

Yeah, I'll get it on a float. It's a heavily patrolled area by the ministry,
so it's not worth risking the chain.

I'll just have to wait the few hours until my buddy isn't busy!

Thanks,
Chris

"fletcher" <none@nowhere.com> wrote in message
news:mAK0c.131001$j55.124773@fe05.usenetserver.com ...
> One if these YJ guys will chime in for you, but if I were in your shoes I
> would not drive far at all. I believe you can cut the top off a coke can
> and affix it to your rear output shaft and hold in the oil for a short
time.
> Or can you have your buddy pull you that far?
>
>
> "Christian Fry" <fry_christian@hotmail.com> wrote in message
> news:9KJ0c.2940$i_2.28776@news20.bellglobal.com...
> > Hey everyone,
> >
> > 89 YJ, 4.2
> >
> > Rear driveshaft blew out of the Jeep, and a bolt got stuck well enough
> that
> > I need it on a lift to get it out...
> >
> > I have a buddy with a shop about 5 km's away, will my transfer case make
> it
> > that far? The fluid spills everywhere when I try to drive it, so that
> > worries me.. alot...
> >
> > Regards,
> > Chris
> >
> >
>
>
>

 

I wouldn't drive at all it if it's loosing gear oil. There is only about 3
pints in there anyway.

--
JimG
80' CJ-7, 258 CID
35" BFG MT's on 15x10 Centerlines
4.56 D30-D44 SOA
D300 w/4:1 & Currie twin sticks
Warn 8000i w/dual batteries
LockRight F&R


"Christian Fry" <fry_christian@hotmail.com> wrote in message
news:9KJ0c.2940$i_2.28776@news20.bellglobal.com...
> Hey everyone,
>
> 89 YJ, 4.2
>
> Rear driveshaft blew out of the Jeep, and a bolt got stuck well enough
that
> I need it on a lift to get it out...
>
> I have a buddy with a shop about 5 km's away, will my transfer case make
it
> that far? The fluid spills everywhere when I try to drive it, so that
> worries me.. alot...
>
> Regards,
> Chris
>
>

 

I wouldn't drive at all it if it's loosing gear oil. There is only about 3
pints in there anyway.

--
JimG
80' CJ-7, 258 CID
35" BFG MT's on 15x10 Centerlines
4.56 D30-D44 SOA
D300 w/4:1 & Currie twin sticks
Warn 8000i w/dual batteries
LockRight F&R


"Christian Fry" <fry_christian@hotmail.com> wrote in message
news:9KJ0c.2940$i_2.28776@news20.bellglobal.com...
> Hey everyone,
>
> 89 YJ, 4.2
>
> Rear driveshaft blew out of the Jeep, and a bolt got stuck well enough
that
> I need it on a lift to get it out...
>
> I have a buddy with a shop about 5 km's away, will my transfer case make
it
> that far? The fluid spills everywhere when I try to drive it, so that
> worries me.. alot...
>
> Regards,
> Chris
>
>

 

I wouldn't drive at all it if it's loosing gear oil. There is only about 3
pints in there anyway.

--
JimG
80' CJ-7, 258 CID
35" BFG MT's on 15x10 Centerlines
4.56 D30-D44 SOA
D300 w/4:1 & Currie twin sticks
Warn 8000i w/dual batteries
LockRight F&R


"Christian Fry" <fry_christian@hotmail.com> wrote in message
news:9KJ0c.2940$i_2.28776@news20.bellglobal.com...
> Hey everyone,
>
> 89 YJ, 4.2
>
> Rear driveshaft blew out of the Jeep, and a bolt got stuck well enough
that
> I need it on a lift to get it out...
>
> I have a buddy with a shop about 5 km's away, will my transfer case make
it
> that far? The fluid spills everywhere when I try to drive it, so that
> worries me.. alot...
>
> Regards,
> Chris
>
>