I don't have my Jeep at work today, and forgot to take the measurements
with me. I need to know what the distance between the two vertical
pipes on the roll cage above the rear fender on a stock YJ is. I also
need to know the width of the top of the fender on the inside of the
vehicle.

I am going out to the tool store right after work (today is my only
chance to get there before closing) to buy a metal tool box that I can
fit on top of the fender in the back of my YJ.

If anyone happnes to know these numbers, that would really help me out.

-Dan

 

This might be the same as my 86 CJ7's. Mine is 48" between the bars and
37" between the fender edges. My fenders might be different, likely 36"
makes more sense. I have a home built 2 layer glass tub but the bar
should be the same.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Dan wrote:
>
> I don't have my Jeep at work today, and forgot to take the measurements
> with me. I need to know what the distance between the two vertical
> pipes on the roll cage above the rear fender on a stock YJ is. I also
> need to know the width of the top of the fender on the inside of the
> vehicle.
>
> I am going out to the tool store right after work (today is my only
> chance to get there before closing) to buy a metal tool box that I can
> fit on top of the fender in the back of my YJ.
>
> If anyone happnes to know these numbers, that would really help me out.
>
> -Dan

 

This might be the same as my 86 CJ7's. Mine is 48" between the bars and
37" between the fender edges. My fenders might be different, likely 36"
makes more sense. I have a home built 2 layer glass tub but the bar
should be the same.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Dan wrote:
>
> I don't have my Jeep at work today, and forgot to take the measurements
> with me. I need to know what the distance between the two vertical
> pipes on the roll cage above the rear fender on a stock YJ is. I also
> need to know the width of the top of the fender on the inside of the
> vehicle.
>
> I am going out to the tool store right after work (today is my only
> chance to get there before closing) to buy a metal tool box that I can
> fit on top of the fender in the back of my YJ.
>
> If anyone happnes to know these numbers, that would really help me out.
>
> -Dan

 

This might be the same as my 86 CJ7's. Mine is 48" between the bars and
37" between the fender edges. My fenders might be different, likely 36"
makes more sense. I have a home built 2 layer glass tub but the bar
should be the same.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Dan wrote:
>
> I don't have my Jeep at work today, and forgot to take the measurements
> with me. I need to know what the distance between the two vertical
> pipes on the roll cage above the rear fender on a stock YJ is. I also
> need to know the width of the top of the fender on the inside of the
> vehicle.
>
> I am going out to the tool store right after work (today is my only
> chance to get there before closing) to buy a metal tool box that I can
> fit on top of the fender in the back of my YJ.
>
> If anyone happnes to know these numbers, that would really help me out.
>
> -Dan

 

This might be the same as my 86 CJ7's. Mine is 48" between the bars and
37" between the fender edges. My fenders might be different, likely 36"
makes more sense. I have a home built 2 layer glass tub but the bar
should be the same.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Dan wrote:
>
> I don't have my Jeep at work today, and forgot to take the measurements
> with me. I need to know what the distance between the two vertical
> pipes on the roll cage above the rear fender on a stock YJ is. I also
> need to know the width of the top of the fender on the inside of the
> vehicle.
>
> I am going out to the tool store right after work (today is my only
> chance to get there before closing) to buy a metal tool box that I can
> fit on top of the fender in the back of my YJ.
>
> If anyone happnes to know these numbers, that would really help me out.
>
> -Dan