FS: CJ7 parts, 258, weber carb, etc...FL Panhandle
07-03-2004 | 05:58 PM
#1
Guest
Posts: n/a
FS: CJ7 parts, 258, weber carb, etc...FL Panhandle
I have a few CJ7 parts that I'm selling. The 258 with 4wd hardware aluminum
valve cover, hedman headers, flowmaster muffler, weber carb - $650 takes it
all. Will take offers on each piece and would consider shipping the smaller
stuff. Right now it's still in the jeep, but I'm working on getting it
pulled. Hopefully it will be out by next weekend. Also have a T5 tranny, cj7
fenders and hood and tub. The tranny works fine and has unknown mileage,
passenger fender is dented on the front. Tranny -$250, hood and fenders $50,
tub $100. Tub is rusted pretty bad in the rear, but could be salvageable by
someone with the right skills. Will also consider trades on T176 or T18
trannny, 4.## gears, lockers or 1 piece axles for AMC 20 or D30. For some
pics see this link: http://85cj7.blogspot.com/
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
valve cover, hedman headers, flowmaster muffler, weber carb - $650 takes it
all. Will take offers on each piece and would consider shipping the smaller
stuff. Right now it's still in the jeep, but I'm working on getting it
pulled. Hopefully it will be out by next weekend. Also have a T5 tranny, cj7
fenders and hood and tub. The tranny works fine and has unknown mileage,
passenger fender is dented on the front. Tranny -$250, hood and fenders $50,
tub $100. Tub is rusted pretty bad in the rear, but could be salvageable by
someone with the right skills. Will also consider trades on T176 or T18
trannny, 4.## gears, lockers or 1 piece axles for AMC 20 or D30. For some
pics see this link: http://85cj7.blogspot.com/
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
07-03-2004 | 09:58 PM
#2
Guest
Posts: n/a
Re: CJ7 parts, 258, weber carb, etc...FL Panhandle
Are you parting out the Jeep completely? If so, I need some back seat
mounts.
Jim
--
'86 CJ-7
D30 D44 D300 4:1 T-5
SOA ARB 4.56 Mopar MPI
Fresno, CA USA
http://www.redneck4x4.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2kokvaF4ks83U1@uni-berlin.de...
> I have a few CJ7 parts that I'm selling. The 258 with 4wd hardware
aluminum
> valve cover, hedman headers, flowmaster muffler, weber carb - $650 takes
it
> all. Will take offers on each piece and would consider shipping the
smaller
> stuff. Right now it's still in the jeep, but I'm working on getting it
> pulled. Hopefully it will be out by next weekend. Also have a T5 tranny,
cj7
> fenders and hood and tub. The tranny works fine and has unknown mileage,
> passenger fender is dented on the front. Tranny -$250, hood and fenders
$50,
> tub $100. Tub is rusted pretty bad in the rear, but could be salvageable
by
> someone with the right skills. Will also consider trades on T176 or T18
> trannny, 4.## gears, lockers or 1 piece axles for AMC 20 or D30. For some
> pics see this link: http://85cj7.blogspot.com/
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
mounts.
Jim
--
'86 CJ-7
D30 D44 D300 4:1 T-5
SOA ARB 4.56 Mopar MPI
Fresno, CA USA
http://www.redneck4x4.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2kokvaF4ks83U1@uni-berlin.de...
> I have a few CJ7 parts that I'm selling. The 258 with 4wd hardware
aluminum
> valve cover, hedman headers, flowmaster muffler, weber carb - $650 takes
it
> all. Will take offers on each piece and would consider shipping the
smaller
> stuff. Right now it's still in the jeep, but I'm working on getting it
> pulled. Hopefully it will be out by next weekend. Also have a T5 tranny,
cj7
> fenders and hood and tub. The tranny works fine and has unknown mileage,
> passenger fender is dented on the front. Tranny -$250, hood and fenders
$50,
> tub $100. Tub is rusted pretty bad in the rear, but could be salvageable
by
> someone with the right skills. Will also consider trades on T176 or T18
> trannny, 4.## gears, lockers or 1 piece axles for AMC 20 or D30. For some
> pics see this link: http://85cj7.blogspot.com/
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
07-03-2004 | 09:58 PM
#3
Guest
Posts: n/a
Re: CJ7 parts, 258, weber carb, etc...FL Panhandle
Are you parting out the Jeep completely? If so, I need some back seat
mounts.
Jim
--
'86 CJ-7
D30 D44 D300 4:1 T-5
SOA ARB 4.56 Mopar MPI
Fresno, CA USA
http://www.redneck4x4.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2kokvaF4ks83U1@uni-berlin.de...
> I have a few CJ7 parts that I'm selling. The 258 with 4wd hardware
aluminum
> valve cover, hedman headers, flowmaster muffler, weber carb - $650 takes
it
> all. Will take offers on each piece and would consider shipping the
smaller
> stuff. Right now it's still in the jeep, but I'm working on getting it
> pulled. Hopefully it will be out by next weekend. Also have a T5 tranny,
cj7
> fenders and hood and tub. The tranny works fine and has unknown mileage,
> passenger fender is dented on the front. Tranny -$250, hood and fenders
$50,
> tub $100. Tub is rusted pretty bad in the rear, but could be salvageable
by
> someone with the right skills. Will also consider trades on T176 or T18
> trannny, 4.## gears, lockers or 1 piece axles for AMC 20 or D30. For some
> pics see this link: http://85cj7.blogspot.com/
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
mounts.
Jim
--
'86 CJ-7
D30 D44 D300 4:1 T-5
SOA ARB 4.56 Mopar MPI
Fresno, CA USA
http://www.redneck4x4.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2kokvaF4ks83U1@uni-berlin.de...
> I have a few CJ7 parts that I'm selling. The 258 with 4wd hardware
aluminum
> valve cover, hedman headers, flowmaster muffler, weber carb - $650 takes
it
> all. Will take offers on each piece and would consider shipping the
smaller
> stuff. Right now it's still in the jeep, but I'm working on getting it
> pulled. Hopefully it will be out by next weekend. Also have a T5 tranny,
cj7
> fenders and hood and tub. The tranny works fine and has unknown mileage,
> passenger fender is dented on the front. Tranny -$250, hood and fenders
$50,
> tub $100. Tub is rusted pretty bad in the rear, but could be salvageable
by
> someone with the right skills. Will also consider trades on T176 or T18
> trannny, 4.## gears, lockers or 1 piece axles for AMC 20 or D30. For some
> pics see this link: http://85cj7.blogspot.com/
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
07-03-2004 | 09:58 PM
#4
Guest
Posts: n/a
Re: CJ7 parts, 258, weber carb, etc...FL Panhandle
Are you parting out the Jeep completely? If so, I need some back seat
mounts.
Jim
--
'86 CJ-7
D30 D44 D300 4:1 T-5
SOA ARB 4.56 Mopar MPI
Fresno, CA USA
http://www.redneck4x4.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2kokvaF4ks83U1@uni-berlin.de...
> I have a few CJ7 parts that I'm selling. The 258 with 4wd hardware
aluminum
> valve cover, hedman headers, flowmaster muffler, weber carb - $650 takes
it
> all. Will take offers on each piece and would consider shipping the
smaller
> stuff. Right now it's still in the jeep, but I'm working on getting it
> pulled. Hopefully it will be out by next weekend. Also have a T5 tranny,
cj7
> fenders and hood and tub. The tranny works fine and has unknown mileage,
> passenger fender is dented on the front. Tranny -$250, hood and fenders
$50,
> tub $100. Tub is rusted pretty bad in the rear, but could be salvageable
by
> someone with the right skills. Will also consider trades on T176 or T18
> trannny, 4.## gears, lockers or 1 piece axles for AMC 20 or D30. For some
> pics see this link: http://85cj7.blogspot.com/
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
mounts.
Jim
--
'86 CJ-7
D30 D44 D300 4:1 T-5
SOA ARB 4.56 Mopar MPI
Fresno, CA USA
http://www.redneck4x4.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2kokvaF4ks83U1@uni-berlin.de...
> I have a few CJ7 parts that I'm selling. The 258 with 4wd hardware
aluminum
> valve cover, hedman headers, flowmaster muffler, weber carb - $650 takes
it
> all. Will take offers on each piece and would consider shipping the
smaller
> stuff. Right now it's still in the jeep, but I'm working on getting it
> pulled. Hopefully it will be out by next weekend. Also have a T5 tranny,
cj7
> fenders and hood and tub. The tranny works fine and has unknown mileage,
> passenger fender is dented on the front. Tranny -$250, hood and fenders
$50,
> tub $100. Tub is rusted pretty bad in the rear, but could be salvageable
by
> someone with the right skills. Will also consider trades on T176 or T18
> trannny, 4.## gears, lockers or 1 piece axles for AMC 20 or D30. For some
> pics see this link: http://85cj7.blogspot.com/
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
07-03-2004 | 09:58 PM
#5
Guest
Posts: n/a
Re: CJ7 parts, 258, weber carb, etc...FL Panhandle
Are you parting out the Jeep completely? If so, I need some back seat
mounts.
Jim
--
'86 CJ-7
D30 D44 D300 4:1 T-5
SOA ARB 4.56 Mopar MPI
Fresno, CA USA
http://www.redneck4x4.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2kokvaF4ks83U1@uni-berlin.de...
> I have a few CJ7 parts that I'm selling. The 258 with 4wd hardware
aluminum
> valve cover, hedman headers, flowmaster muffler, weber carb - $650 takes
it
> all. Will take offers on each piece and would consider shipping the
smaller
> stuff. Right now it's still in the jeep, but I'm working on getting it
> pulled. Hopefully it will be out by next weekend. Also have a T5 tranny,
cj7
> fenders and hood and tub. The tranny works fine and has unknown mileage,
> passenger fender is dented on the front. Tranny -$250, hood and fenders
$50,
> tub $100. Tub is rusted pretty bad in the rear, but could be salvageable
by
> someone with the right skills. Will also consider trades on T176 or T18
> trannny, 4.## gears, lockers or 1 piece axles for AMC 20 or D30. For some
> pics see this link: http://85cj7.blogspot.com/
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
mounts.
Jim
--
'86 CJ-7
D30 D44 D300 4:1 T-5
SOA ARB 4.56 Mopar MPI
Fresno, CA USA
http://www.redneck4x4.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2kokvaF4ks83U1@uni-berlin.de...
> I have a few CJ7 parts that I'm selling. The 258 with 4wd hardware
aluminum
> valve cover, hedman headers, flowmaster muffler, weber carb - $650 takes
it
> all. Will take offers on each piece and would consider shipping the
smaller
> stuff. Right now it's still in the jeep, but I'm working on getting it
> pulled. Hopefully it will be out by next weekend. Also have a T5 tranny,
cj7
> fenders and hood and tub. The tranny works fine and has unknown mileage,
> passenger fender is dented on the front. Tranny -$250, hood and fenders
$50,
> tub $100. Tub is rusted pretty bad in the rear, but could be salvageable
by
> someone with the right skills. Will also consider trades on T176 or T18
> trannny, 4.## gears, lockers or 1 piece axles for AMC 20 or D30. For some
> pics see this link: http://85cj7.blogspot.com/
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
07-06-2004 | 07:47 AM
#6
Guest
Posts: n/a
Re: CJ7 parts, 258, weber carb, etc...FL Panhandle
> Are you parting out the Jeep completely? If so, I need some back seat
> mounts.
Sorry, I'm just rebuilding the old rust bucket - I'm keepin the parts I can
reuse and selling parts I don't need to help finance the project.
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
> mounts.
Sorry, I'm just rebuilding the old rust bucket - I'm keepin the parts I can
reuse and selling parts I don't need to help finance the project.
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
07-06-2004 | 07:47 AM
#7
Guest
Posts: n/a
Re: CJ7 parts, 258, weber carb, etc...FL Panhandle
> Are you parting out the Jeep completely? If so, I need some back seat
> mounts.
Sorry, I'm just rebuilding the old rust bucket - I'm keepin the parts I can
reuse and selling parts I don't need to help finance the project.
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
> mounts.
Sorry, I'm just rebuilding the old rust bucket - I'm keepin the parts I can
reuse and selling parts I don't need to help finance the project.
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
07-06-2004 | 07:47 AM
#8
Guest
Posts: n/a
Re: CJ7 parts, 258, weber carb, etc...FL Panhandle
> Are you parting out the Jeep completely? If so, I need some back seat
> mounts.
Sorry, I'm just rebuilding the old rust bucket - I'm keepin the parts I can
reuse and selling parts I don't need to help finance the project.
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
> mounts.
Sorry, I'm just rebuilding the old rust bucket - I'm keepin the parts I can
reuse and selling parts I don't need to help finance the project.
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
07-06-2004 | 07:47 AM
#9
Guest
Posts: n/a
Re: CJ7 parts, 258, weber carb, etc...FL Panhandle
> Are you parting out the Jeep completely? If so, I need some back seat
> mounts.
Sorry, I'm just rebuilding the old rust bucket - I'm keepin the parts I can
reuse and selling parts I don't need to help finance the project.
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
> mounts.
Sorry, I'm just rebuilding the old rust bucket - I'm keepin the parts I can
reuse and selling parts I don't need to help finance the project.
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)