Does anybody know?
10-24-2003 | 02:02 PM
#1
Guest
Posts: n/a
Does anybody know?
I drove the Jeep in to work again today. It was 35 degrees. I had to
wipe frost off of the seats before taking off. No top or doors on the
Jeep right now... It was sunny so there was no need for that stuff
since I still don't have a windjammer. Does anybody know why I can't
find a windjammer for a '76 CJ5? If I buy one like this:
http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
dimension would be off on it? I wonder how much trouble it would be
to modify it to fit my '76? Anybody else run into the same problem
I'm running into trying to find a windjammer for a '76 CJ5? Thank
you.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
wipe frost off of the seats before taking off. No top or doors on the
Jeep right now... It was sunny so there was no need for that stuff
since I still don't have a windjammer. Does anybody know why I can't
find a windjammer for a '76 CJ5? If I buy one like this:
http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
dimension would be off on it? I wonder how much trouble it would be
to modify it to fit my '76? Anybody else run into the same problem
I'm running into trying to find a windjammer for a '76 CJ5? Thank
you.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
10-24-2003 | 02:07 PM
#2
Guest
Posts: n/a
Re: Does anybody know?
On Fri, 24 Oct 2003 13:02:24 -0400, travis
<travist34removethis@hotmail.com> shared the following:
>I drove the Jeep in to work again today. It was 35 degrees. I had to
>wipe frost off of the seats before taking off. No top or doors on the
>Jeep right now... It was sunny so there was no need for that stuff
>since I still don't have a windjammer. Does anybody know why I can't
>find a windjammer for a '76 CJ5? If I buy one like this:
>http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
>for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
>dimension would be off on it? I wonder how much trouble it would be
>to modify it to fit my '76? Anybody else run into the same problem
>I'm running into trying to find a windjammer for a '76 CJ5? Thank
>you.
OK, I know now. I just called their tech support department. The
roll bar changed in '80 so that the front portion of it...the vertical
tubes...they mount to the floor now. On my '76 they mount up on the
wheel-wells. So I could use that windjammer shown above but there
would be no place to connect it on the sides. Only on the top and
bottom. Hmmm.... Just figured I'd share that with y'all in case
anybody else was curious about this like I was.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<travist34removethis@hotmail.com> shared the following:
>I drove the Jeep in to work again today. It was 35 degrees. I had to
>wipe frost off of the seats before taking off. No top or doors on the
>Jeep right now... It was sunny so there was no need for that stuff
>since I still don't have a windjammer. Does anybody know why I can't
>find a windjammer for a '76 CJ5? If I buy one like this:
>http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
>for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
>dimension would be off on it? I wonder how much trouble it would be
>to modify it to fit my '76? Anybody else run into the same problem
>I'm running into trying to find a windjammer for a '76 CJ5? Thank
>you.
OK, I know now. I just called their tech support department. The
roll bar changed in '80 so that the front portion of it...the vertical
tubes...they mount to the floor now. On my '76 they mount up on the
wheel-wells. So I could use that windjammer shown above but there
would be no place to connect it on the sides. Only on the top and
bottom. Hmmm.... Just figured I'd share that with y'all in case
anybody else was curious about this like I was.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
10-24-2003 | 02:07 PM
#3
Guest
Posts: n/a
Re: Does anybody know?
On Fri, 24 Oct 2003 13:02:24 -0400, travis
<travist34removethis@hotmail.com> shared the following:
>I drove the Jeep in to work again today. It was 35 degrees. I had to
>wipe frost off of the seats before taking off. No top or doors on the
>Jeep right now... It was sunny so there was no need for that stuff
>since I still don't have a windjammer. Does anybody know why I can't
>find a windjammer for a '76 CJ5? If I buy one like this:
>http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
>for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
>dimension would be off on it? I wonder how much trouble it would be
>to modify it to fit my '76? Anybody else run into the same problem
>I'm running into trying to find a windjammer for a '76 CJ5? Thank
>you.
OK, I know now. I just called their tech support department. The
roll bar changed in '80 so that the front portion of it...the vertical
tubes...they mount to the floor now. On my '76 they mount up on the
wheel-wells. So I could use that windjammer shown above but there
would be no place to connect it on the sides. Only on the top and
bottom. Hmmm.... Just figured I'd share that with y'all in case
anybody else was curious about this like I was.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<travist34removethis@hotmail.com> shared the following:
>I drove the Jeep in to work again today. It was 35 degrees. I had to
>wipe frost off of the seats before taking off. No top or doors on the
>Jeep right now... It was sunny so there was no need for that stuff
>since I still don't have a windjammer. Does anybody know why I can't
>find a windjammer for a '76 CJ5? If I buy one like this:
>http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
>for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
>dimension would be off on it? I wonder how much trouble it would be
>to modify it to fit my '76? Anybody else run into the same problem
>I'm running into trying to find a windjammer for a '76 CJ5? Thank
>you.
OK, I know now. I just called their tech support department. The
roll bar changed in '80 so that the front portion of it...the vertical
tubes...they mount to the floor now. On my '76 they mount up on the
wheel-wells. So I could use that windjammer shown above but there
would be no place to connect it on the sides. Only on the top and
bottom. Hmmm.... Just figured I'd share that with y'all in case
anybody else was curious about this like I was.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
10-24-2003 | 02:07 PM
#4
Guest
Posts: n/a
Re: Does anybody know?
On Fri, 24 Oct 2003 13:02:24 -0400, travis
<travist34removethis@hotmail.com> shared the following:
>I drove the Jeep in to work again today. It was 35 degrees. I had to
>wipe frost off of the seats before taking off. No top or doors on the
>Jeep right now... It was sunny so there was no need for that stuff
>since I still don't have a windjammer. Does anybody know why I can't
>find a windjammer for a '76 CJ5? If I buy one like this:
>http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
>for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
>dimension would be off on it? I wonder how much trouble it would be
>to modify it to fit my '76? Anybody else run into the same problem
>I'm running into trying to find a windjammer for a '76 CJ5? Thank
>you.
OK, I know now. I just called their tech support department. The
roll bar changed in '80 so that the front portion of it...the vertical
tubes...they mount to the floor now. On my '76 they mount up on the
wheel-wells. So I could use that windjammer shown above but there
would be no place to connect it on the sides. Only on the top and
bottom. Hmmm.... Just figured I'd share that with y'all in case
anybody else was curious about this like I was.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<travist34removethis@hotmail.com> shared the following:
>I drove the Jeep in to work again today. It was 35 degrees. I had to
>wipe frost off of the seats before taking off. No top or doors on the
>Jeep right now... It was sunny so there was no need for that stuff
>since I still don't have a windjammer. Does anybody know why I can't
>find a windjammer for a '76 CJ5? If I buy one like this:
>http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
>for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
>dimension would be off on it? I wonder how much trouble it would be
>to modify it to fit my '76? Anybody else run into the same problem
>I'm running into trying to find a windjammer for a '76 CJ5? Thank
>you.
OK, I know now. I just called their tech support department. The
roll bar changed in '80 so that the front portion of it...the vertical
tubes...they mount to the floor now. On my '76 they mount up on the
wheel-wells. So I could use that windjammer shown above but there
would be no place to connect it on the sides. Only on the top and
bottom. Hmmm.... Just figured I'd share that with y'all in case
anybody else was curious about this like I was.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
10-25-2003 | 09:20 AM
#5
Guest
Posts: n/a
Re: Does anybody know?
On or about Fri, 24 Oct 2003, travis of travist34removethis@hotmail.com wrote:
> On Fri, 24 Oct 2003 13:02:24 -0400, travis
> <travist34removethis@hotmail.com> shared the following:
>
> >I drove the Jeep in to work again today. It was 35 degrees. I had to
> >wipe frost off of the seats before taking off. No top or doors on the
> >Jeep right now... It was sunny so there was no need for that stuff
> >since I still don't have a windjammer. Does anybody know why I can't
> >find a windjammer for a '76 CJ5? If I buy one like this:
> >http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
> >for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
> >dimension would be off on it? I wonder how much trouble it would be
> >to modify it to fit my '76? Anybody else run into the same problem
> >I'm running into trying to find a windjammer for a '76 CJ5? Thank
> >you.
>
> OK, I know now. I just called their tech support department. The
> roll bar changed in '80 so that the front portion of it...the vertical
> tubes...they mount to the floor now. On my '76 they mount up on the
> wheel-wells. So I could use that windjammer shown above but there
> would be no place to connect it on the sides. Only on the top and
> bottom. Hmmm.... Just figured I'd share that with y'all in case
> anybody else was curious about this like I was.
That was what I'd guessed. I'm curious, though, did you talk to the rep
about how it attaches? I'm wondering it it is just Velcro straps, and it
something like YJ footman loops might be substituted along the front side
of the wheel well.
> On Fri, 24 Oct 2003 13:02:24 -0400, travis
> <travist34removethis@hotmail.com> shared the following:
>
> >I drove the Jeep in to work again today. It was 35 degrees. I had to
> >wipe frost off of the seats before taking off. No top or doors on the
> >Jeep right now... It was sunny so there was no need for that stuff
> >since I still don't have a windjammer. Does anybody know why I can't
> >find a windjammer for a '76 CJ5? If I buy one like this:
> >http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
> >for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
> >dimension would be off on it? I wonder how much trouble it would be
> >to modify it to fit my '76? Anybody else run into the same problem
> >I'm running into trying to find a windjammer for a '76 CJ5? Thank
> >you.
>
> OK, I know now. I just called their tech support department. The
> roll bar changed in '80 so that the front portion of it...the vertical
> tubes...they mount to the floor now. On my '76 they mount up on the
> wheel-wells. So I could use that windjammer shown above but there
> would be no place to connect it on the sides. Only on the top and
> bottom. Hmmm.... Just figured I'd share that with y'all in case
> anybody else was curious about this like I was.
That was what I'd guessed. I'm curious, though, did you talk to the rep
about how it attaches? I'm wondering it it is just Velcro straps, and it
something like YJ footman loops might be substituted along the front side
of the wheel well.
10-25-2003 | 09:20 AM
#6
Guest
Posts: n/a
Re: Does anybody know?
On or about Fri, 24 Oct 2003, travis of travist34removethis@hotmail.com wrote:
> On Fri, 24 Oct 2003 13:02:24 -0400, travis
> <travist34removethis@hotmail.com> shared the following:
>
> >I drove the Jeep in to work again today. It was 35 degrees. I had to
> >wipe frost off of the seats before taking off. No top or doors on the
> >Jeep right now... It was sunny so there was no need for that stuff
> >since I still don't have a windjammer. Does anybody know why I can't
> >find a windjammer for a '76 CJ5? If I buy one like this:
> >http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
> >for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
> >dimension would be off on it? I wonder how much trouble it would be
> >to modify it to fit my '76? Anybody else run into the same problem
> >I'm running into trying to find a windjammer for a '76 CJ5? Thank
> >you.
>
> OK, I know now. I just called their tech support department. The
> roll bar changed in '80 so that the front portion of it...the vertical
> tubes...they mount to the floor now. On my '76 they mount up on the
> wheel-wells. So I could use that windjammer shown above but there
> would be no place to connect it on the sides. Only on the top and
> bottom. Hmmm.... Just figured I'd share that with y'all in case
> anybody else was curious about this like I was.
That was what I'd guessed. I'm curious, though, did you talk to the rep
about how it attaches? I'm wondering it it is just Velcro straps, and it
something like YJ footman loops might be substituted along the front side
of the wheel well.
> On Fri, 24 Oct 2003 13:02:24 -0400, travis
> <travist34removethis@hotmail.com> shared the following:
>
> >I drove the Jeep in to work again today. It was 35 degrees. I had to
> >wipe frost off of the seats before taking off. No top or doors on the
> >Jeep right now... It was sunny so there was no need for that stuff
> >since I still don't have a windjammer. Does anybody know why I can't
> >find a windjammer for a '76 CJ5? If I buy one like this:
> >http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
> >for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
> >dimension would be off on it? I wonder how much trouble it would be
> >to modify it to fit my '76? Anybody else run into the same problem
> >I'm running into trying to find a windjammer for a '76 CJ5? Thank
> >you.
>
> OK, I know now. I just called their tech support department. The
> roll bar changed in '80 so that the front portion of it...the vertical
> tubes...they mount to the floor now. On my '76 they mount up on the
> wheel-wells. So I could use that windjammer shown above but there
> would be no place to connect it on the sides. Only on the top and
> bottom. Hmmm.... Just figured I'd share that with y'all in case
> anybody else was curious about this like I was.
That was what I'd guessed. I'm curious, though, did you talk to the rep
about how it attaches? I'm wondering it it is just Velcro straps, and it
something like YJ footman loops might be substituted along the front side
of the wheel well.
10-25-2003 | 09:20 AM
#7
Guest
Posts: n/a
Re: Does anybody know?
On or about Fri, 24 Oct 2003, travis of travist34removethis@hotmail.com wrote:
> On Fri, 24 Oct 2003 13:02:24 -0400, travis
> <travist34removethis@hotmail.com> shared the following:
>
> >I drove the Jeep in to work again today. It was 35 degrees. I had to
> >wipe frost off of the seats before taking off. No top or doors on the
> >Jeep right now... It was sunny so there was no need for that stuff
> >since I still don't have a windjammer. Does anybody know why I can't
> >find a windjammer for a '76 CJ5? If I buy one like this:
> >http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
> >for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
> >dimension would be off on it? I wonder how much trouble it would be
> >to modify it to fit my '76? Anybody else run into the same problem
> >I'm running into trying to find a windjammer for a '76 CJ5? Thank
> >you.
>
> OK, I know now. I just called their tech support department. The
> roll bar changed in '80 so that the front portion of it...the vertical
> tubes...they mount to the floor now. On my '76 they mount up on the
> wheel-wells. So I could use that windjammer shown above but there
> would be no place to connect it on the sides. Only on the top and
> bottom. Hmmm.... Just figured I'd share that with y'all in case
> anybody else was curious about this like I was.
That was what I'd guessed. I'm curious, though, did you talk to the rep
about how it attaches? I'm wondering it it is just Velcro straps, and it
something like YJ footman loops might be substituted along the front side
of the wheel well.
> On Fri, 24 Oct 2003 13:02:24 -0400, travis
> <travist34removethis@hotmail.com> shared the following:
>
> >I drove the Jeep in to work again today. It was 35 degrees. I had to
> >wipe frost off of the seats before taking off. No top or doors on the
> >Jeep right now... It was sunny so there was no need for that stuff
> >since I still don't have a windjammer. Does anybody know why I can't
> >find a windjammer for a '76 CJ5? If I buy one like this:
> >http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
> >for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
> >dimension would be off on it? I wonder how much trouble it would be
> >to modify it to fit my '76? Anybody else run into the same problem
> >I'm running into trying to find a windjammer for a '76 CJ5? Thank
> >you.
>
> OK, I know now. I just called their tech support department. The
> roll bar changed in '80 so that the front portion of it...the vertical
> tubes...they mount to the floor now. On my '76 they mount up on the
> wheel-wells. So I could use that windjammer shown above but there
> would be no place to connect it on the sides. Only on the top and
> bottom. Hmmm.... Just figured I'd share that with y'all in case
> anybody else was curious about this like I was.
That was what I'd guessed. I'm curious, though, did you talk to the rep
about how it attaches? I'm wondering it it is just Velcro straps, and it
something like YJ footman loops might be substituted along the front side
of the wheel well.
10-25-2003 | 02:17 PM
#8
Guest
Posts: n/a
Re: Does anybody know?
On Sat, 25 Oct 2003 08:20:37 -0400, Lee Ayrton <layrton@ntplx.net>
shared the following:
>On or about Fri, 24 Oct 2003, travis of travist34removethis@hotmail.com wrote:
>
>> On Fri, 24 Oct 2003 13:02:24 -0400, travis
>> <travist34removethis@hotmail.com> shared the following:
>>
>> >I drove the Jeep in to work again today. It was 35 degrees. I had to
>> >wipe frost off of the seats before taking off. No top or doors on the
>> >Jeep right now... It was sunny so there was no need for that stuff
>> >since I still don't have a windjammer. Does anybody know why I can't
>> >find a windjammer for a '76 CJ5? If I buy one like this:
>> >http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
>> >for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
>> >dimension would be off on it? I wonder how much trouble it would be
>> >to modify it to fit my '76? Anybody else run into the same problem
>> >I'm running into trying to find a windjammer for a '76 CJ5? Thank
>> >you.
>>
>> OK, I know now. I just called their tech support department. The
>> roll bar changed in '80 so that the front portion of it...the vertical
>> tubes...they mount to the floor now. On my '76 they mount up on the
>> wheel-wells. So I could use that windjammer shown above but there
>> would be no place to connect it on the sides. Only on the top and
>> bottom. Hmmm.... Just figured I'd share that with y'all in case
>> anybody else was curious about this like I was.
>
>That was what I'd guessed. I'm curious, though, did you talk to the rep
>about how it attaches? I'm wondering it it is just Velcro straps, and it
>something like YJ footman loops might be substituted along the front side
>of the wheel well.
>
>
Yes, and he said it does use velcro straps. I'm thinking of buying
one of their windjammers and trying to modify it to work. If I do
I'll share my results with y'all.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
shared the following:
>On or about Fri, 24 Oct 2003, travis of travist34removethis@hotmail.com wrote:
>
>> On Fri, 24 Oct 2003 13:02:24 -0400, travis
>> <travist34removethis@hotmail.com> shared the following:
>>
>> >I drove the Jeep in to work again today. It was 35 degrees. I had to
>> >wipe frost off of the seats before taking off. No top or doors on the
>> >Jeep right now... It was sunny so there was no need for that stuff
>> >since I still don't have a windjammer. Does anybody know why I can't
>> >find a windjammer for a '76 CJ5? If I buy one like this:
>> >http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
>> >for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
>> >dimension would be off on it? I wonder how much trouble it would be
>> >to modify it to fit my '76? Anybody else run into the same problem
>> >I'm running into trying to find a windjammer for a '76 CJ5? Thank
>> >you.
>>
>> OK, I know now. I just called their tech support department. The
>> roll bar changed in '80 so that the front portion of it...the vertical
>> tubes...they mount to the floor now. On my '76 they mount up on the
>> wheel-wells. So I could use that windjammer shown above but there
>> would be no place to connect it on the sides. Only on the top and
>> bottom. Hmmm.... Just figured I'd share that with y'all in case
>> anybody else was curious about this like I was.
>
>That was what I'd guessed. I'm curious, though, did you talk to the rep
>about how it attaches? I'm wondering it it is just Velcro straps, and it
>something like YJ footman loops might be substituted along the front side
>of the wheel well.
>
>
Yes, and he said it does use velcro straps. I'm thinking of buying
one of their windjammers and trying to modify it to work. If I do
I'll share my results with y'all.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
10-25-2003 | 02:17 PM
#9
Guest
Posts: n/a
Re: Does anybody know?
On Sat, 25 Oct 2003 08:20:37 -0400, Lee Ayrton <layrton@ntplx.net>
shared the following:
>On or about Fri, 24 Oct 2003, travis of travist34removethis@hotmail.com wrote:
>
>> On Fri, 24 Oct 2003 13:02:24 -0400, travis
>> <travist34removethis@hotmail.com> shared the following:
>>
>> >I drove the Jeep in to work again today. It was 35 degrees. I had to
>> >wipe frost off of the seats before taking off. No top or doors on the
>> >Jeep right now... It was sunny so there was no need for that stuff
>> >since I still don't have a windjammer. Does anybody know why I can't
>> >find a windjammer for a '76 CJ5? If I buy one like this:
>> >http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
>> >for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
>> >dimension would be off on it? I wonder how much trouble it would be
>> >to modify it to fit my '76? Anybody else run into the same problem
>> >I'm running into trying to find a windjammer for a '76 CJ5? Thank
>> >you.
>>
>> OK, I know now. I just called their tech support department. The
>> roll bar changed in '80 so that the front portion of it...the vertical
>> tubes...they mount to the floor now. On my '76 they mount up on the
>> wheel-wells. So I could use that windjammer shown above but there
>> would be no place to connect it on the sides. Only on the top and
>> bottom. Hmmm.... Just figured I'd share that with y'all in case
>> anybody else was curious about this like I was.
>
>That was what I'd guessed. I'm curious, though, did you talk to the rep
>about how it attaches? I'm wondering it it is just Velcro straps, and it
>something like YJ footman loops might be substituted along the front side
>of the wheel well.
>
>
Yes, and he said it does use velcro straps. I'm thinking of buying
one of their windjammers and trying to modify it to work. If I do
I'll share my results with y'all.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
shared the following:
>On or about Fri, 24 Oct 2003, travis of travist34removethis@hotmail.com wrote:
>
>> On Fri, 24 Oct 2003 13:02:24 -0400, travis
>> <travist34removethis@hotmail.com> shared the following:
>>
>> >I drove the Jeep in to work again today. It was 35 degrees. I had to
>> >wipe frost off of the seats before taking off. No top or doors on the
>> >Jeep right now... It was sunny so there was no need for that stuff
>> >since I still don't have a windjammer. Does anybody know why I can't
>> >find a windjammer for a '76 CJ5? If I buy one like this:
>> >http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
>> >for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
>> >dimension would be off on it? I wonder how much trouble it would be
>> >to modify it to fit my '76? Anybody else run into the same problem
>> >I'm running into trying to find a windjammer for a '76 CJ5? Thank
>> >you.
>>
>> OK, I know now. I just called their tech support department. The
>> roll bar changed in '80 so that the front portion of it...the vertical
>> tubes...they mount to the floor now. On my '76 they mount up on the
>> wheel-wells. So I could use that windjammer shown above but there
>> would be no place to connect it on the sides. Only on the top and
>> bottom. Hmmm.... Just figured I'd share that with y'all in case
>> anybody else was curious about this like I was.
>
>That was what I'd guessed. I'm curious, though, did you talk to the rep
>about how it attaches? I'm wondering it it is just Velcro straps, and it
>something like YJ footman loops might be substituted along the front side
>of the wheel well.
>
>
Yes, and he said it does use velcro straps. I'm thinking of buying
one of their windjammers and trying to modify it to work. If I do
I'll share my results with y'all.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
10-25-2003 | 02:17 PM
#10
Guest
Posts: n/a
Re: Does anybody know?
On Sat, 25 Oct 2003 08:20:37 -0400, Lee Ayrton <layrton@ntplx.net>
shared the following:
>On or about Fri, 24 Oct 2003, travis of travist34removethis@hotmail.com wrote:
>
>> On Fri, 24 Oct 2003 13:02:24 -0400, travis
>> <travist34removethis@hotmail.com> shared the following:
>>
>> >I drove the Jeep in to work again today. It was 35 degrees. I had to
>> >wipe frost off of the seats before taking off. No top or doors on the
>> >Jeep right now... It was sunny so there was no need for that stuff
>> >since I still don't have a windjammer. Does anybody know why I can't
>> >find a windjammer for a '76 CJ5? If I buy one like this:
>> >http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
>> >for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
>> >dimension would be off on it? I wonder how much trouble it would be
>> >to modify it to fit my '76? Anybody else run into the same problem
>> >I'm running into trying to find a windjammer for a '76 CJ5? Thank
>> >you.
>>
>> OK, I know now. I just called their tech support department. The
>> roll bar changed in '80 so that the front portion of it...the vertical
>> tubes...they mount to the floor now. On my '76 they mount up on the
>> wheel-wells. So I could use that windjammer shown above but there
>> would be no place to connect it on the sides. Only on the top and
>> bottom. Hmmm.... Just figured I'd share that with y'all in case
>> anybody else was curious about this like I was.
>
>That was what I'd guessed. I'm curious, though, did you talk to the rep
>about how it attaches? I'm wondering it it is just Velcro straps, and it
>something like YJ footman loops might be substituted along the front side
>of the wheel well.
>
>
Yes, and he said it does use velcro straps. I'm thinking of buying
one of their windjammers and trying to modify it to work. If I do
I'll share my results with y'all.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
shared the following:
>On or about Fri, 24 Oct 2003, travis of travist34removethis@hotmail.com wrote:
>
>> On Fri, 24 Oct 2003 13:02:24 -0400, travis
>> <travist34removethis@hotmail.com> shared the following:
>>
>> >I drove the Jeep in to work again today. It was 35 degrees. I had to
>> >wipe frost off of the seats before taking off. No top or doors on the
>> >Jeep right now... It was sunny so there was no need for that stuff
>> >since I still don't have a windjammer. Does anybody know why I can't
>> >find a windjammer for a '76 CJ5? If I buy one like this:
>> >http://www.4wd.com/shopwrangler/Disp...uctSKU=8002801
>> >for a '85-90 CJ does anyone know why it wouldn't fit my '76? What
>> >dimension would be off on it? I wonder how much trouble it would be
>> >to modify it to fit my '76? Anybody else run into the same problem
>> >I'm running into trying to find a windjammer for a '76 CJ5? Thank
>> >you.
>>
>> OK, I know now. I just called their tech support department. The
>> roll bar changed in '80 so that the front portion of it...the vertical
>> tubes...they mount to the floor now. On my '76 they mount up on the
>> wheel-wells. So I could use that windjammer shown above but there
>> would be no place to connect it on the sides. Only on the top and
>> bottom. Hmmm.... Just figured I'd share that with y'all in case
>> anybody else was curious about this like I was.
>
>That was what I'd guessed. I'm curious, though, did you talk to the rep
>about how it attaches? I'm wondering it it is just Velcro straps, and it
>something like YJ footman loops might be substituted along the front side
>of the wheel well.
>
>
Yes, and he said it does use velcro straps. I'm thinking of buying
one of their windjammers and trying to modify it to work. If I do
I'll share my results with y'all.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!