Distributor hold down bolt size
08-28-2005 | 09:02 AM
#2
Guest
Posts: n/a
Re: Distributor hold down bolt size
Joe.
I used a "crow's foot" wrench on mine. They are just the end of a open end
wrench with a square 3/8th hole for a extension and ratchet. Might be hard
to find there but the set was cheaper then a special wrench here and worked
great. One half inch is what you want though.
Joe in Ohio
"Joe and Joann" <mauijoeb@REMOVEhawaii.rr.com> wrote in message
news:K_6Qe.6458$UE2.595@tornado.socal.rr.com...
> Anyone know the size bolt head that holds down the distributor for a 1990
> 4.2 L? I need to buy the correct size distributor wrench.
> Aloha
> Joe in Maui
I used a "crow's foot" wrench on mine. They are just the end of a open end
wrench with a square 3/8th hole for a extension and ratchet. Might be hard
to find there but the set was cheaper then a special wrench here and worked
great. One half inch is what you want though.
Joe in Ohio
"Joe and Joann" <mauijoeb@REMOVEhawaii.rr.com> wrote in message
news:K_6Qe.6458$UE2.595@tornado.socal.rr.com...
> Anyone know the size bolt head that holds down the distributor for a 1990
> 4.2 L? I need to buy the correct size distributor wrench.
> Aloha
> Joe in Maui
08-28-2005 | 09:02 AM
#3
Guest
Posts: n/a
Re: Distributor hold down bolt size
Joe.
I used a "crow's foot" wrench on mine. They are just the end of a open end
wrench with a square 3/8th hole for a extension and ratchet. Might be hard
to find there but the set was cheaper then a special wrench here and worked
great. One half inch is what you want though.
Joe in Ohio
"Joe and Joann" <mauijoeb@REMOVEhawaii.rr.com> wrote in message
news:K_6Qe.6458$UE2.595@tornado.socal.rr.com...
> Anyone know the size bolt head that holds down the distributor for a 1990
> 4.2 L? I need to buy the correct size distributor wrench.
> Aloha
> Joe in Maui
I used a "crow's foot" wrench on mine. They are just the end of a open end
wrench with a square 3/8th hole for a extension and ratchet. Might be hard
to find there but the set was cheaper then a special wrench here and worked
great. One half inch is what you want though.
Joe in Ohio
"Joe and Joann" <mauijoeb@REMOVEhawaii.rr.com> wrote in message
news:K_6Qe.6458$UE2.595@tornado.socal.rr.com...
> Anyone know the size bolt head that holds down the distributor for a 1990
> 4.2 L? I need to buy the correct size distributor wrench.
> Aloha
> Joe in Maui
08-28-2005 | 09:02 AM
#4
Guest
Posts: n/a
Re: Distributor hold down bolt size
Joe.
I used a "crow's foot" wrench on mine. They are just the end of a open end
wrench with a square 3/8th hole for a extension and ratchet. Might be hard
to find there but the set was cheaper then a special wrench here and worked
great. One half inch is what you want though.
Joe in Ohio
"Joe and Joann" <mauijoeb@REMOVEhawaii.rr.com> wrote in message
news:K_6Qe.6458$UE2.595@tornado.socal.rr.com...
> Anyone know the size bolt head that holds down the distributor for a 1990
> 4.2 L? I need to buy the correct size distributor wrench.
> Aloha
> Joe in Maui
I used a "crow's foot" wrench on mine. They are just the end of a open end
wrench with a square 3/8th hole for a extension and ratchet. Might be hard
to find there but the set was cheaper then a special wrench here and worked
great. One half inch is what you want though.
Joe in Ohio
"Joe and Joann" <mauijoeb@REMOVEhawaii.rr.com> wrote in message
news:K_6Qe.6458$UE2.595@tornado.socal.rr.com...
> Anyone know the size bolt head that holds down the distributor for a 1990
> 4.2 L? I need to buy the correct size distributor wrench.
> Aloha
> Joe in Maui
08-28-2005 | 09:02 AM
#5
Guest
Posts: n/a
Re: Distributor hold down bolt size
Joe.
I used a "crow's foot" wrench on mine. They are just the end of a open end
wrench with a square 3/8th hole for a extension and ratchet. Might be hard
to find there but the set was cheaper then a special wrench here and worked
great. One half inch is what you want though.
Joe in Ohio
"Joe and Joann" <mauijoeb@REMOVEhawaii.rr.com> wrote in message
news:K_6Qe.6458$UE2.595@tornado.socal.rr.com...
> Anyone know the size bolt head that holds down the distributor for a 1990
> 4.2 L? I need to buy the correct size distributor wrench.
> Aloha
> Joe in Maui
I used a "crow's foot" wrench on mine. They are just the end of a open end
wrench with a square 3/8th hole for a extension and ratchet. Might be hard
to find there but the set was cheaper then a special wrench here and worked
great. One half inch is what you want though.
Joe in Ohio
"Joe and Joann" <mauijoeb@REMOVEhawaii.rr.com> wrote in message
news:K_6Qe.6458$UE2.595@tornado.socal.rr.com...
> Anyone know the size bolt head that holds down the distributor for a 1990
> 4.2 L? I need to buy the correct size distributor wrench.
> Aloha
> Joe in Maui
08-28-2005 | 09:04 AM
#6
Guest
Posts: n/a
Re: Distributor hold down bolt size
I'm assuming the 4.2L is the same as the 4.0L in the cherokees.
"Jo Bo" <jromasSPAM@columbus.rr.com> wrote in message
news:pJhQe.67538$gB.51678@tornado.ohiordc.rr.com.. .
> Joe.
>
> I used a "crow's foot" wrench on mine. They are just the end of a open end
> wrench with a square 3/8th hole for a extension and ratchet. Might be hard
> to find there but the set was cheaper then a special wrench here and
> worked great. One half inch is what you want though.
>
> Joe in Ohio
>
> "Joe and Joann" <mauijoeb@REMOVEhawaii.rr.com> wrote in message
> news:K_6Qe.6458$UE2.595@tornado.socal.rr.com...
>> Anyone know the size bolt head that holds down the distributor for a 1990
>> 4.2 L? I need to buy the correct size distributor wrench.
>> Aloha
>> Joe in Maui
>
>
"Jo Bo" <jromasSPAM@columbus.rr.com> wrote in message
news:pJhQe.67538$gB.51678@tornado.ohiordc.rr.com.. .
> Joe.
>
> I used a "crow's foot" wrench on mine. They are just the end of a open end
> wrench with a square 3/8th hole for a extension and ratchet. Might be hard
> to find there but the set was cheaper then a special wrench here and
> worked great. One half inch is what you want though.
>
> Joe in Ohio
>
> "Joe and Joann" <mauijoeb@REMOVEhawaii.rr.com> wrote in message
> news:K_6Qe.6458$UE2.595@tornado.socal.rr.com...
>> Anyone know the size bolt head that holds down the distributor for a 1990
>> 4.2 L? I need to buy the correct size distributor wrench.
>> Aloha
>> Joe in Maui
>
>
08-28-2005 | 09:04 AM
#7
Guest
Posts: n/a
Re: Distributor hold down bolt size
I'm assuming the 4.2L is the same as the 4.0L in the cherokees.
"Jo Bo" <jromasSPAM@columbus.rr.com> wrote in message
news:pJhQe.67538$gB.51678@tornado.ohiordc.rr.com.. .
> Joe.
>
> I used a "crow's foot" wrench on mine. They are just the end of a open end
> wrench with a square 3/8th hole for a extension and ratchet. Might be hard
> to find there but the set was cheaper then a special wrench here and
> worked great. One half inch is what you want though.
>
> Joe in Ohio
>
> "Joe and Joann" <mauijoeb@REMOVEhawaii.rr.com> wrote in message
> news:K_6Qe.6458$UE2.595@tornado.socal.rr.com...
>> Anyone know the size bolt head that holds down the distributor for a 1990
>> 4.2 L? I need to buy the correct size distributor wrench.
>> Aloha
>> Joe in Maui
>
>
"Jo Bo" <jromasSPAM@columbus.rr.com> wrote in message
news:pJhQe.67538$gB.51678@tornado.ohiordc.rr.com.. .
> Joe.
>
> I used a "crow's foot" wrench on mine. They are just the end of a open end
> wrench with a square 3/8th hole for a extension and ratchet. Might be hard
> to find there but the set was cheaper then a special wrench here and
> worked great. One half inch is what you want though.
>
> Joe in Ohio
>
> "Joe and Joann" <mauijoeb@REMOVEhawaii.rr.com> wrote in message
> news:K_6Qe.6458$UE2.595@tornado.socal.rr.com...
>> Anyone know the size bolt head that holds down the distributor for a 1990
>> 4.2 L? I need to buy the correct size distributor wrench.
>> Aloha
>> Joe in Maui
>
>
08-28-2005 | 09:04 AM
#8
Guest
Posts: n/a
Re: Distributor hold down bolt size
I'm assuming the 4.2L is the same as the 4.0L in the cherokees.
"Jo Bo" <jromasSPAM@columbus.rr.com> wrote in message
news:pJhQe.67538$gB.51678@tornado.ohiordc.rr.com.. .
> Joe.
>
> I used a "crow's foot" wrench on mine. They are just the end of a open end
> wrench with a square 3/8th hole for a extension and ratchet. Might be hard
> to find there but the set was cheaper then a special wrench here and
> worked great. One half inch is what you want though.
>
> Joe in Ohio
>
> "Joe and Joann" <mauijoeb@REMOVEhawaii.rr.com> wrote in message
> news:K_6Qe.6458$UE2.595@tornado.socal.rr.com...
>> Anyone know the size bolt head that holds down the distributor for a 1990
>> 4.2 L? I need to buy the correct size distributor wrench.
>> Aloha
>> Joe in Maui
>
>
"Jo Bo" <jromasSPAM@columbus.rr.com> wrote in message
news:pJhQe.67538$gB.51678@tornado.ohiordc.rr.com.. .
> Joe.
>
> I used a "crow's foot" wrench on mine. They are just the end of a open end
> wrench with a square 3/8th hole for a extension and ratchet. Might be hard
> to find there but the set was cheaper then a special wrench here and
> worked great. One half inch is what you want though.
>
> Joe in Ohio
>
> "Joe and Joann" <mauijoeb@REMOVEhawaii.rr.com> wrote in message
> news:K_6Qe.6458$UE2.595@tornado.socal.rr.com...
>> Anyone know the size bolt head that holds down the distributor for a 1990
>> 4.2 L? I need to buy the correct size distributor wrench.
>> Aloha
>> Joe in Maui
>
>
08-28-2005 | 09:04 AM
#9
Guest
Posts: n/a
Re: Distributor hold down bolt size
I'm assuming the 4.2L is the same as the 4.0L in the cherokees.
"Jo Bo" <jromasSPAM@columbus.rr.com> wrote in message
news:pJhQe.67538$gB.51678@tornado.ohiordc.rr.com.. .
> Joe.
>
> I used a "crow's foot" wrench on mine. They are just the end of a open end
> wrench with a square 3/8th hole for a extension and ratchet. Might be hard
> to find there but the set was cheaper then a special wrench here and
> worked great. One half inch is what you want though.
>
> Joe in Ohio
>
> "Joe and Joann" <mauijoeb@REMOVEhawaii.rr.com> wrote in message
> news:K_6Qe.6458$UE2.595@tornado.socal.rr.com...
>> Anyone know the size bolt head that holds down the distributor for a 1990
>> 4.2 L? I need to buy the correct size distributor wrench.
>> Aloha
>> Joe in Maui
>
>
"Jo Bo" <jromasSPAM@columbus.rr.com> wrote in message
news:pJhQe.67538$gB.51678@tornado.ohiordc.rr.com.. .
> Joe.
>
> I used a "crow's foot" wrench on mine. They are just the end of a open end
> wrench with a square 3/8th hole for a extension and ratchet. Might be hard
> to find there but the set was cheaper then a special wrench here and
> worked great. One half inch is what you want though.
>
> Joe in Ohio
>
> "Joe and Joann" <mauijoeb@REMOVEhawaii.rr.com> wrote in message
> news:K_6Qe.6458$UE2.595@tornado.socal.rr.com...
>> Anyone know the size bolt head that holds down the distributor for a 1990
>> 4.2 L? I need to buy the correct size distributor wrench.
>> Aloha
>> Joe in Maui
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Heath Roberts
Jeep Mailing List
9
01-09-2004 10:58 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)