Dana 30 front wheel bearings
07-03-2006 | 05:12 AM
#1
Guest
Posts: n/a
Dana 30 front wheel bearings
'73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
per wheel, an inner and an outer). They have them listed as the same,
but the race for the outer is sloppy in the hub. The hub obviously
hasn't been "wallered out" (as these local Tennesseans would say) but
there's at least 3/32" of cleareance in what should be a pres-fit.
Anyone know the right outer-bearing, or do I need to just make a
press-fit bushing and bore it to press-fit the race into? (been maching
to within a few tenth's tolerance for many years)
Thanks in advance for your help...
Bill -
per wheel, an inner and an outer). They have them listed as the same,
but the race for the outer is sloppy in the hub. The hub obviously
hasn't been "wallered out" (as these local Tennesseans would say) but
there's at least 3/32" of cleareance in what should be a pres-fit.
Anyone know the right outer-bearing, or do I need to just make a
press-fit bushing and bore it to press-fit the race into? (been maching
to within a few tenth's tolerance for many years)
Thanks in advance for your help...
Bill -
07-03-2006 | 07:34 AM
#2
Guest
Posts: n/a
Re: Dana 30 front wheel bearings
They look the same:
http://www.quadratec.com/products/pr...c=51&pg=1&pg=1
Looks like you've got some machining to do.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
KayakBill wrote:
>
> '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> per wheel, an inner and an outer). They have them listed as the same,
> but the race for the outer is sloppy in the hub. The hub obviously
> hasn't been "wallered out" (as these local Tennesseans would say) but
> there's at least 3/32" of cleareance in what should be a pres-fit.
> Anyone know the right outer-bearing, or do I need to just make a
> press-fit bushing and bore it to press-fit the race into? (been maching
> to within a few tenth's tolerance for many years)
>
> Thanks in advance for your help...
>
> Bill -
http://www.quadratec.com/products/pr...c=51&pg=1&pg=1
Looks like you've got some machining to do.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
KayakBill wrote:
>
> '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> per wheel, an inner and an outer). They have them listed as the same,
> but the race for the outer is sloppy in the hub. The hub obviously
> hasn't been "wallered out" (as these local Tennesseans would say) but
> there's at least 3/32" of cleareance in what should be a pres-fit.
> Anyone know the right outer-bearing, or do I need to just make a
> press-fit bushing and bore it to press-fit the race into? (been maching
> to within a few tenth's tolerance for many years)
>
> Thanks in advance for your help...
>
> Bill -
07-03-2006 | 07:34 AM
#3
Guest
Posts: n/a
Re: Dana 30 front wheel bearings
They look the same:
http://www.quadratec.com/products/pr...c=51&pg=1&pg=1
Looks like you've got some machining to do.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
KayakBill wrote:
>
> '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> per wheel, an inner and an outer). They have them listed as the same,
> but the race for the outer is sloppy in the hub. The hub obviously
> hasn't been "wallered out" (as these local Tennesseans would say) but
> there's at least 3/32" of cleareance in what should be a pres-fit.
> Anyone know the right outer-bearing, or do I need to just make a
> press-fit bushing and bore it to press-fit the race into? (been maching
> to within a few tenth's tolerance for many years)
>
> Thanks in advance for your help...
>
> Bill -
http://www.quadratec.com/products/pr...c=51&pg=1&pg=1
Looks like you've got some machining to do.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
KayakBill wrote:
>
> '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> per wheel, an inner and an outer). They have them listed as the same,
> but the race for the outer is sloppy in the hub. The hub obviously
> hasn't been "wallered out" (as these local Tennesseans would say) but
> there's at least 3/32" of cleareance in what should be a pres-fit.
> Anyone know the right outer-bearing, or do I need to just make a
> press-fit bushing and bore it to press-fit the race into? (been maching
> to within a few tenth's tolerance for many years)
>
> Thanks in advance for your help...
>
> Bill -
07-03-2006 | 07:34 AM
#4
Guest
Posts: n/a
Re: Dana 30 front wheel bearings
They look the same:
http://www.quadratec.com/products/pr...c=51&pg=1&pg=1
Looks like you've got some machining to do.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
KayakBill wrote:
>
> '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> per wheel, an inner and an outer). They have them listed as the same,
> but the race for the outer is sloppy in the hub. The hub obviously
> hasn't been "wallered out" (as these local Tennesseans would say) but
> there's at least 3/32" of cleareance in what should be a pres-fit.
> Anyone know the right outer-bearing, or do I need to just make a
> press-fit bushing and bore it to press-fit the race into? (been maching
> to within a few tenth's tolerance for many years)
>
> Thanks in advance for your help...
>
> Bill -
http://www.quadratec.com/products/pr...c=51&pg=1&pg=1
Looks like you've got some machining to do.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
KayakBill wrote:
>
> '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> per wheel, an inner and an outer). They have them listed as the same,
> but the race for the outer is sloppy in the hub. The hub obviously
> hasn't been "wallered out" (as these local Tennesseans would say) but
> there's at least 3/32" of cleareance in what should be a pres-fit.
> Anyone know the right outer-bearing, or do I need to just make a
> press-fit bushing and bore it to press-fit the race into? (been maching
> to within a few tenth's tolerance for many years)
>
> Thanks in advance for your help...
>
> Bill -
07-03-2006 | 10:36 AM
#5
Guest
Posts: n/a
Re: Dana 30 front wheel bearings
They sure are different bearings in my CJ7's D30! They look close,
but....
I just replaced my inner and got a bearing at NAPA. The box says BR50
with these numbers: LM102949 and LM102910. One number would be the cage
and the other the race.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
KayakBill wrote:
>
> '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> per wheel, an inner and an outer). They have them listed as the same,
> but the race for the outer is sloppy in the hub. The hub obviously
> hasn't been "wallered out" (as these local Tennesseans would say) but
> there's at least 3/32" of cleareance in what should be a pres-fit.
> Anyone know the right outer-bearing, or do I need to just make a
> press-fit bushing and bore it to press-fit the race into? (been maching
> to within a few tenth's tolerance for many years)
>
> Thanks in advance for your help...
>
> Bill -
but....
I just replaced my inner and got a bearing at NAPA. The box says BR50
with these numbers: LM102949 and LM102910. One number would be the cage
and the other the race.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
KayakBill wrote:
>
> '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> per wheel, an inner and an outer). They have them listed as the same,
> but the race for the outer is sloppy in the hub. The hub obviously
> hasn't been "wallered out" (as these local Tennesseans would say) but
> there's at least 3/32" of cleareance in what should be a pres-fit.
> Anyone know the right outer-bearing, or do I need to just make a
> press-fit bushing and bore it to press-fit the race into? (been maching
> to within a few tenth's tolerance for many years)
>
> Thanks in advance for your help...
>
> Bill -
07-03-2006 | 10:36 AM
#6
Guest
Posts: n/a
Re: Dana 30 front wheel bearings
They sure are different bearings in my CJ7's D30! They look close,
but....
I just replaced my inner and got a bearing at NAPA. The box says BR50
with these numbers: LM102949 and LM102910. One number would be the cage
and the other the race.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
KayakBill wrote:
>
> '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> per wheel, an inner and an outer). They have them listed as the same,
> but the race for the outer is sloppy in the hub. The hub obviously
> hasn't been "wallered out" (as these local Tennesseans would say) but
> there's at least 3/32" of cleareance in what should be a pres-fit.
> Anyone know the right outer-bearing, or do I need to just make a
> press-fit bushing and bore it to press-fit the race into? (been maching
> to within a few tenth's tolerance for many years)
>
> Thanks in advance for your help...
>
> Bill -
but....
I just replaced my inner and got a bearing at NAPA. The box says BR50
with these numbers: LM102949 and LM102910. One number would be the cage
and the other the race.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
KayakBill wrote:
>
> '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> per wheel, an inner and an outer). They have them listed as the same,
> but the race for the outer is sloppy in the hub. The hub obviously
> hasn't been "wallered out" (as these local Tennesseans would say) but
> there's at least 3/32" of cleareance in what should be a pres-fit.
> Anyone know the right outer-bearing, or do I need to just make a
> press-fit bushing and bore it to press-fit the race into? (been maching
> to within a few tenth's tolerance for many years)
>
> Thanks in advance for your help...
>
> Bill -
07-03-2006 | 10:36 AM
#7
Guest
Posts: n/a
Re: Dana 30 front wheel bearings
They sure are different bearings in my CJ7's D30! They look close,
but....
I just replaced my inner and got a bearing at NAPA. The box says BR50
with these numbers: LM102949 and LM102910. One number would be the cage
and the other the race.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
KayakBill wrote:
>
> '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> per wheel, an inner and an outer). They have them listed as the same,
> but the race for the outer is sloppy in the hub. The hub obviously
> hasn't been "wallered out" (as these local Tennesseans would say) but
> there's at least 3/32" of cleareance in what should be a pres-fit.
> Anyone know the right outer-bearing, or do I need to just make a
> press-fit bushing and bore it to press-fit the race into? (been maching
> to within a few tenth's tolerance for many years)
>
> Thanks in advance for your help...
>
> Bill -
but....
I just replaced my inner and got a bearing at NAPA. The box says BR50
with these numbers: LM102949 and LM102910. One number would be the cage
and the other the race.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
KayakBill wrote:
>
> '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> per wheel, an inner and an outer). They have them listed as the same,
> but the race for the outer is sloppy in the hub. The hub obviously
> hasn't been "wallered out" (as these local Tennesseans would say) but
> there's at least 3/32" of cleareance in what should be a pres-fit.
> Anyone know the right outer-bearing, or do I need to just make a
> press-fit bushing and bore it to press-fit the race into? (been maching
> to within a few tenth's tolerance for many years)
>
> Thanks in advance for your help...
>
> Bill -
07-03-2006 | 05:07 PM
#8
Guest
Posts: n/a
Re: Dana 30 front wheel bearings
Hi Mike,
I know they are different on the Dana 44s, they look similar, but
have a different cone angle, and fortunately for me the outer will not
slide all the way on the spindle.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> They sure are different bearings in my CJ7's D30! They look close,
> but....
>
> I just replaced my inner and got a bearing at NAPA. The box says BR50
> with these numbers: LM102949 and LM102910. One number would be the cage
> and the other the race.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> KayakBill wrote:
> >
> > '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> > per wheel, an inner and an outer). They have them listed as the same,
> > but the race for the outer is sloppy in the hub. The hub obviously
> > hasn't been "wallered out" (as these local Tennesseans would say) but
> > there's at least 3/32" of cleareance in what should be a pres-fit.
> > Anyone know the right outer-bearing, or do I need to just make a
> > press-fit bushing and bore it to press-fit the race into? (been maching
> > to within a few tenth's tolerance for many years)
> >
> > Thanks in advance for your help...
> >
> > Bill -
I know they are different on the Dana 44s, they look similar, but
have a different cone angle, and fortunately for me the outer will not
slide all the way on the spindle.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> They sure are different bearings in my CJ7's D30! They look close,
> but....
>
> I just replaced my inner and got a bearing at NAPA. The box says BR50
> with these numbers: LM102949 and LM102910. One number would be the cage
> and the other the race.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> KayakBill wrote:
> >
> > '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> > per wheel, an inner and an outer). They have them listed as the same,
> > but the race for the outer is sloppy in the hub. The hub obviously
> > hasn't been "wallered out" (as these local Tennesseans would say) but
> > there's at least 3/32" of cleareance in what should be a pres-fit.
> > Anyone know the right outer-bearing, or do I need to just make a
> > press-fit bushing and bore it to press-fit the race into? (been maching
> > to within a few tenth's tolerance for many years)
> >
> > Thanks in advance for your help...
> >
> > Bill -
07-03-2006 | 05:07 PM
#9
Guest
Posts: n/a
Re: Dana 30 front wheel bearings
Hi Mike,
I know they are different on the Dana 44s, they look similar, but
have a different cone angle, and fortunately for me the outer will not
slide all the way on the spindle.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> They sure are different bearings in my CJ7's D30! They look close,
> but....
>
> I just replaced my inner and got a bearing at NAPA. The box says BR50
> with these numbers: LM102949 and LM102910. One number would be the cage
> and the other the race.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> KayakBill wrote:
> >
> > '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> > per wheel, an inner and an outer). They have them listed as the same,
> > but the race for the outer is sloppy in the hub. The hub obviously
> > hasn't been "wallered out" (as these local Tennesseans would say) but
> > there's at least 3/32" of cleareance in what should be a pres-fit.
> > Anyone know the right outer-bearing, or do I need to just make a
> > press-fit bushing and bore it to press-fit the race into? (been maching
> > to within a few tenth's tolerance for many years)
> >
> > Thanks in advance for your help...
> >
> > Bill -
I know they are different on the Dana 44s, they look similar, but
have a different cone angle, and fortunately for me the outer will not
slide all the way on the spindle.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> They sure are different bearings in my CJ7's D30! They look close,
> but....
>
> I just replaced my inner and got a bearing at NAPA. The box says BR50
> with these numbers: LM102949 and LM102910. One number would be the cage
> and the other the race.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> KayakBill wrote:
> >
> > '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> > per wheel, an inner and an outer). They have them listed as the same,
> > but the race for the outer is sloppy in the hub. The hub obviously
> > hasn't been "wallered out" (as these local Tennesseans would say) but
> > there's at least 3/32" of cleareance in what should be a pres-fit.
> > Anyone know the right outer-bearing, or do I need to just make a
> > press-fit bushing and bore it to press-fit the race into? (been maching
> > to within a few tenth's tolerance for many years)
> >
> > Thanks in advance for your help...
> >
> > Bill -
07-03-2006 | 05:07 PM
#10
Guest
Posts: n/a
Re: Dana 30 front wheel bearings
Hi Mike,
I know they are different on the Dana 44s, they look similar, but
have a different cone angle, and fortunately for me the outer will not
slide all the way on the spindle.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> They sure are different bearings in my CJ7's D30! They look close,
> but....
>
> I just replaced my inner and got a bearing at NAPA. The box says BR50
> with these numbers: LM102949 and LM102910. One number would be the cage
> and the other the race.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> KayakBill wrote:
> >
> > '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> > per wheel, an inner and an outer). They have them listed as the same,
> > but the race for the outer is sloppy in the hub. The hub obviously
> > hasn't been "wallered out" (as these local Tennesseans would say) but
> > there's at least 3/32" of cleareance in what should be a pres-fit.
> > Anyone know the right outer-bearing, or do I need to just make a
> > press-fit bushing and bore it to press-fit the race into? (been maching
> > to within a few tenth's tolerance for many years)
> >
> > Thanks in advance for your help...
> >
> > Bill -
I know they are different on the Dana 44s, they look similar, but
have a different cone angle, and fortunately for me the outer will not
slide all the way on the spindle.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> They sure are different bearings in my CJ7's D30! They look close,
> but....
>
> I just replaced my inner and got a bearing at NAPA. The box says BR50
> with these numbers: LM102949 and LM102910. One number would be the cage
> and the other the race.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> KayakBill wrote:
> >
> > '73 CJ-5, Dana 30 front-end... got the wheel bearings from AutoZone (2
> > per wheel, an inner and an outer). They have them listed as the same,
> > but the race for the outer is sloppy in the hub. The hub obviously
> > hasn't been "wallered out" (as these local Tennesseans would say) but
> > there's at least 3/32" of cleareance in what should be a pres-fit.
> > Anyone know the right outer-bearing, or do I need to just make a
> > press-fit bushing and bore it to press-fit the race into? (been maching
> > to within a few tenth's tolerance for many years)
> >
> > Thanks in advance for your help...
> >
> > Bill -