coolant temp gage..
10-08-2005 | 04:12 AM
#2
Guest
Posts: n/a
Re: coolant temp gage..
They are usually put in the cylinder head, because that is the hottest part
of the engine. I can't remember ever seeing one anywhere else.
Earle
"Steve G" <stevncin@charter.net> wrote in message
news:l4B1f.6871$v97.2456@fe04.lga...
> In the 258 motor where would a mechanical sending unit for temp go in at
> best? Ive seen the threaded plugs in the side of the block, but these look
> to be hard to get out. Is there a better place?
>
> Thanks
>
> Steve
>
>
of the engine. I can't remember ever seeing one anywhere else.
Earle
"Steve G" <stevncin@charter.net> wrote in message
news:l4B1f.6871$v97.2456@fe04.lga...
> In the 258 motor where would a mechanical sending unit for temp go in at
> best? Ive seen the threaded plugs in the side of the block, but these look
> to be hard to get out. Is there a better place?
>
> Thanks
>
> Steve
>
>
10-08-2005 | 04:12 AM
#3
Guest
Posts: n/a
Re: coolant temp gage..
They are usually put in the cylinder head, because that is the hottest part
of the engine. I can't remember ever seeing one anywhere else.
Earle
"Steve G" <stevncin@charter.net> wrote in message
news:l4B1f.6871$v97.2456@fe04.lga...
> In the 258 motor where would a mechanical sending unit for temp go in at
> best? Ive seen the threaded plugs in the side of the block, but these look
> to be hard to get out. Is there a better place?
>
> Thanks
>
> Steve
>
>
of the engine. I can't remember ever seeing one anywhere else.
Earle
"Steve G" <stevncin@charter.net> wrote in message
news:l4B1f.6871$v97.2456@fe04.lga...
> In the 258 motor where would a mechanical sending unit for temp go in at
> best? Ive seen the threaded plugs in the side of the block, but these look
> to be hard to get out. Is there a better place?
>
> Thanks
>
> Steve
>
>
10-08-2005 | 04:12 AM
#4
Guest
Posts: n/a
Re: coolant temp gage..
They are usually put in the cylinder head, because that is the hottest part
of the engine. I can't remember ever seeing one anywhere else.
Earle
"Steve G" <stevncin@charter.net> wrote in message
news:l4B1f.6871$v97.2456@fe04.lga...
> In the 258 motor where would a mechanical sending unit for temp go in at
> best? Ive seen the threaded plugs in the side of the block, but these look
> to be hard to get out. Is there a better place?
>
> Thanks
>
> Steve
>
>
of the engine. I can't remember ever seeing one anywhere else.
Earle
"Steve G" <stevncin@charter.net> wrote in message
news:l4B1f.6871$v97.2456@fe04.lga...
> In the 258 motor where would a mechanical sending unit for temp go in at
> best? Ive seen the threaded plugs in the side of the block, but these look
> to be hard to get out. Is there a better place?
>
> Thanks
>
> Steve
>
>
Thread
Thread Starter
Forum
Replies
Last Post
lou
Jeep Mailing List
6
12-16-2005 02:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)