Cherokee Fog light bulb replacement???
11-20-2003 | 08:32 AM
#1
Guest
Posts: n/a
Cherokee Fog light bulb replacement???
How do you get into the housing to replace the bulb? It seems to be sealed
up to keep water out , ,but I can't figure out a way in. Does the housing
have to be removed from the frame/bumper? It is 1997.
thanks.
Richard
up to keep water out , ,but I can't figure out a way in. Does the housing
have to be removed from the frame/bumper? It is 1997.
thanks.
Richard
11-20-2003 | 02:54 PM
#2
Guest
Posts: n/a
Re: Cherokee Fog light bulb replacement???
Isn't '97 the same model line as 2000? On my 2000, there's a small,
rectangular cover with a gasket on the bottom of the housing that removes
with 2 screws. Easiest damn bulb replacement I ever did....
"Richard and Michelle" <mr.barnes@earthlink.net> wrote in message
news:9v2vb.11492$Wy4.5782@newsread2.news.atl.earth link.net...
> How do you get into the housing to replace the bulb? It seems to be sealed
> up to keep water out , ,but I can't figure out a way in. Does the housing
> have to be removed from the frame/bumper? It is 1997.
>
> thanks.
> Richard
>
>
rectangular cover with a gasket on the bottom of the housing that removes
with 2 screws. Easiest damn bulb replacement I ever did....
"Richard and Michelle" <mr.barnes@earthlink.net> wrote in message
news:9v2vb.11492$Wy4.5782@newsread2.news.atl.earth link.net...
> How do you get into the housing to replace the bulb? It seems to be sealed
> up to keep water out , ,but I can't figure out a way in. Does the housing
> have to be removed from the frame/bumper? It is 1997.
>
> thanks.
> Richard
>
>
11-20-2003 | 02:54 PM
#3
Guest
Posts: n/a
Re: Cherokee Fog light bulb replacement???
Isn't '97 the same model line as 2000? On my 2000, there's a small,
rectangular cover with a gasket on the bottom of the housing that removes
with 2 screws. Easiest damn bulb replacement I ever did....
"Richard and Michelle" <mr.barnes@earthlink.net> wrote in message
news:9v2vb.11492$Wy4.5782@newsread2.news.atl.earth link.net...
> How do you get into the housing to replace the bulb? It seems to be sealed
> up to keep water out , ,but I can't figure out a way in. Does the housing
> have to be removed from the frame/bumper? It is 1997.
>
> thanks.
> Richard
>
>
rectangular cover with a gasket on the bottom of the housing that removes
with 2 screws. Easiest damn bulb replacement I ever did....
"Richard and Michelle" <mr.barnes@earthlink.net> wrote in message
news:9v2vb.11492$Wy4.5782@newsread2.news.atl.earth link.net...
> How do you get into the housing to replace the bulb? It seems to be sealed
> up to keep water out , ,but I can't figure out a way in. Does the housing
> have to be removed from the frame/bumper? It is 1997.
>
> thanks.
> Richard
>
>
11-20-2003 | 02:54 PM
#4
Guest
Posts: n/a
Re: Cherokee Fog light bulb replacement???
Isn't '97 the same model line as 2000? On my 2000, there's a small,
rectangular cover with a gasket on the bottom of the housing that removes
with 2 screws. Easiest damn bulb replacement I ever did....
"Richard and Michelle" <mr.barnes@earthlink.net> wrote in message
news:9v2vb.11492$Wy4.5782@newsread2.news.atl.earth link.net...
> How do you get into the housing to replace the bulb? It seems to be sealed
> up to keep water out , ,but I can't figure out a way in. Does the housing
> have to be removed from the frame/bumper? It is 1997.
>
> thanks.
> Richard
>
>
rectangular cover with a gasket on the bottom of the housing that removes
with 2 screws. Easiest damn bulb replacement I ever did....
"Richard and Michelle" <mr.barnes@earthlink.net> wrote in message
news:9v2vb.11492$Wy4.5782@newsread2.news.atl.earth link.net...
> How do you get into the housing to replace the bulb? It seems to be sealed
> up to keep water out , ,but I can't figure out a way in. Does the housing
> have to be removed from the frame/bumper? It is 1997.
>
> thanks.
> Richard
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)