Changing front axle universals on '93 GC
02-14-2005, 11:51 AM
#11
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
Universals (i.e. cross looking things) My 1993 Grand Cherokee has the
Command Track 4WD system. I think the Quadatrack systems did use CVs.
Walt B.
DougW wrote:
> Walt Barie did pass the time by typing:
> > Recently it appears that one or both of the front universal joints
on my
> > '93 GC are starting to go bad (117Kmi). Are they replaceable like
a
> > typical universals (press them out or do I need to purchase rebuilt
axle
> > stubs?
>
> U joints or CV? I thought the 93 production run was only CV.
>
> http://www.chryslerpartsdirect.com/moparonline.htm seems down
> or I'd look.
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
Command Track 4WD system. I think the Quadatrack systems did use CVs.
Walt B.
DougW wrote:
> Walt Barie did pass the time by typing:
> > Recently it appears that one or both of the front universal joints
on my
> > '93 GC are starting to go bad (117Kmi). Are they replaceable like
a
> > typical universals (press them out or do I need to purchase rebuilt
axle
> > stubs?
>
> U joints or CV? I thought the 93 production run was only CV.
>
> http://www.chryslerpartsdirect.com/moparonline.htm seems down
> or I'd look.
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
02-14-2005, 11:51 AM
#12
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
Universals (i.e. cross looking things) My 1993 Grand Cherokee has the
Command Track 4WD system. I think the Quadatrack systems did use CVs.
Walt B.
DougW wrote:
> Walt Barie did pass the time by typing:
> > Recently it appears that one or both of the front universal joints
on my
> > '93 GC are starting to go bad (117Kmi). Are they replaceable like
a
> > typical universals (press them out or do I need to purchase rebuilt
axle
> > stubs?
>
> U joints or CV? I thought the 93 production run was only CV.
>
> http://www.chryslerpartsdirect.com/moparonline.htm seems down
> or I'd look.
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
Command Track 4WD system. I think the Quadatrack systems did use CVs.
Walt B.
DougW wrote:
> Walt Barie did pass the time by typing:
> > Recently it appears that one or both of the front universal joints
on my
> > '93 GC are starting to go bad (117Kmi). Are they replaceable like
a
> > typical universals (press them out or do I need to purchase rebuilt
axle
> > stubs?
>
> U joints or CV? I thought the 93 production run was only CV.
>
> http://www.chryslerpartsdirect.com/moparonline.htm seems down
> or I'd look.
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
02-14-2005, 11:51 AM
#13
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
Universals (i.e. cross looking things) My 1993 Grand Cherokee has the
Command Track 4WD system. I think the Quadatrack systems did use CVs.
Walt B.
DougW wrote:
> Walt Barie did pass the time by typing:
> > Recently it appears that one or both of the front universal joints
on my
> > '93 GC are starting to go bad (117Kmi). Are they replaceable like
a
> > typical universals (press them out or do I need to purchase rebuilt
axle
> > stubs?
>
> U joints or CV? I thought the 93 production run was only CV.
>
> http://www.chryslerpartsdirect.com/moparonline.htm seems down
> or I'd look.
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
Command Track 4WD system. I think the Quadatrack systems did use CVs.
Walt B.
DougW wrote:
> Walt Barie did pass the time by typing:
> > Recently it appears that one or both of the front universal joints
on my
> > '93 GC are starting to go bad (117Kmi). Are they replaceable like
a
> > typical universals (press them out or do I need to purchase rebuilt
axle
> > stubs?
>
> U joints or CV? I thought the 93 production run was only CV.
>
> http://www.chryslerpartsdirect.com/moparonline.htm seems down
> or I'd look.
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
02-14-2005, 05:40 PM
#14
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
barie@city-net.com did pass the time by typing:
> Universals (i.e. cross looking things) My 1993 Grand Cherokee has the
> Command Track 4WD system. I think the Quadatrack systems did use CVs.
That would explain why I have CV joints up front, but the 93 service book only
shows front CV, not U joints. I think they made changes later in the production
run that year. I know for certain they changed trannies. At any rate the CV
and U joint axles are interchangable.
> DougW wrote:
>> Walt Barie did pass the time by typing:
>>> Recently it appears that one or both of the front universal joints on my
>>> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
>>> typical universals (press them out or do I need to purchase rebuilt axle
>>> stubs?
>>
>> U joints or CV? I thought the 93 production run was only CV.
>>
>> http://www.chryslerpartsdirect.com/moparonline.htm seems down
>> or I'd look.
> Universals (i.e. cross looking things) My 1993 Grand Cherokee has the
> Command Track 4WD system. I think the Quadatrack systems did use CVs.
That would explain why I have CV joints up front, but the 93 service book only
shows front CV, not U joints. I think they made changes later in the production
run that year. I know for certain they changed trannies. At any rate the CV
and U joint axles are interchangable.
> DougW wrote:
>> Walt Barie did pass the time by typing:
>>> Recently it appears that one or both of the front universal joints on my
>>> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
>>> typical universals (press them out or do I need to purchase rebuilt axle
>>> stubs?
>>
>> U joints or CV? I thought the 93 production run was only CV.
>>
>> http://www.chryslerpartsdirect.com/moparonline.htm seems down
>> or I'd look.
02-14-2005, 05:40 PM
#15
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
barie@city-net.com did pass the time by typing:
> Universals (i.e. cross looking things) My 1993 Grand Cherokee has the
> Command Track 4WD system. I think the Quadatrack systems did use CVs.
That would explain why I have CV joints up front, but the 93 service book only
shows front CV, not U joints. I think they made changes later in the production
run that year. I know for certain they changed trannies. At any rate the CV
and U joint axles are interchangable.
> DougW wrote:
>> Walt Barie did pass the time by typing:
>>> Recently it appears that one or both of the front universal joints on my
>>> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
>>> typical universals (press them out or do I need to purchase rebuilt axle
>>> stubs?
>>
>> U joints or CV? I thought the 93 production run was only CV.
>>
>> http://www.chryslerpartsdirect.com/moparonline.htm seems down
>> or I'd look.
> Universals (i.e. cross looking things) My 1993 Grand Cherokee has the
> Command Track 4WD system. I think the Quadatrack systems did use CVs.
That would explain why I have CV joints up front, but the 93 service book only
shows front CV, not U joints. I think they made changes later in the production
run that year. I know for certain they changed trannies. At any rate the CV
and U joint axles are interchangable.
> DougW wrote:
>> Walt Barie did pass the time by typing:
>>> Recently it appears that one or both of the front universal joints on my
>>> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
>>> typical universals (press them out or do I need to purchase rebuilt axle
>>> stubs?
>>
>> U joints or CV? I thought the 93 production run was only CV.
>>
>> http://www.chryslerpartsdirect.com/moparonline.htm seems down
>> or I'd look.
02-14-2005, 05:40 PM
#16
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
barie@city-net.com did pass the time by typing:
> Universals (i.e. cross looking things) My 1993 Grand Cherokee has the
> Command Track 4WD system. I think the Quadatrack systems did use CVs.
That would explain why I have CV joints up front, but the 93 service book only
shows front CV, not U joints. I think they made changes later in the production
run that year. I know for certain they changed trannies. At any rate the CV
and U joint axles are interchangable.
> DougW wrote:
>> Walt Barie did pass the time by typing:
>>> Recently it appears that one or both of the front universal joints on my
>>> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
>>> typical universals (press them out or do I need to purchase rebuilt axle
>>> stubs?
>>
>> U joints or CV? I thought the 93 production run was only CV.
>>
>> http://www.chryslerpartsdirect.com/moparonline.htm seems down
>> or I'd look.
> Universals (i.e. cross looking things) My 1993 Grand Cherokee has the
> Command Track 4WD system. I think the Quadatrack systems did use CVs.
That would explain why I have CV joints up front, but the 93 service book only
shows front CV, not U joints. I think they made changes later in the production
run that year. I know for certain they changed trannies. At any rate the CV
and U joint axles are interchangable.
> DougW wrote:
>> Walt Barie did pass the time by typing:
>>> Recently it appears that one or both of the front universal joints on my
>>> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
>>> typical universals (press them out or do I need to purchase rebuilt axle
>>> stubs?
>>
>> U joints or CV? I thought the 93 production run was only CV.
>>
>> http://www.chryslerpartsdirect.com/moparonline.htm seems down
>> or I'd look.
02-15-2005, 12:15 AM
#17
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
they are replacable
old john
"Walt Barie" <barie@city-net.com> wrote in message
news:420f787d$0$3455$4d5ecec7@reader.city-net.com...
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
>
> WB
old john
"Walt Barie" <barie@city-net.com> wrote in message
news:420f787d$0$3455$4d5ecec7@reader.city-net.com...
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
>
> WB
02-15-2005, 12:15 AM
#18
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
they are replacable
old john
"Walt Barie" <barie@city-net.com> wrote in message
news:420f787d$0$3455$4d5ecec7@reader.city-net.com...
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
>
> WB
old john
"Walt Barie" <barie@city-net.com> wrote in message
news:420f787d$0$3455$4d5ecec7@reader.city-net.com...
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
>
> WB
02-15-2005, 12:15 AM
#19
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
they are replacable
old john
"Walt Barie" <barie@city-net.com> wrote in message
news:420f787d$0$3455$4d5ecec7@reader.city-net.com...
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
>
> WB
old john
"Walt Barie" <barie@city-net.com> wrote in message
news:420f787d$0$3455$4d5ecec7@reader.city-net.com...
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
>
> WB
02-15-2005, 09:09 PM
#20
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
Thanks for the info.
L.W.(ßill) ------ III wrote:
> Replaceable: http://www.----------.com/CVaxle.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Walt Barie wrote:
>
>>Recently it appears that one or both of the front universal joints on my
>>'93 GC are starting to go bad (117Kmi). Are they replaceable like a
>>typical universals (press them out or do I need to purchase rebuilt axle
>>stubs?
>>
>>WB
L.W.(ßill) ------ III wrote:
> Replaceable: http://www.----------.com/CVaxle.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Walt Barie wrote:
>
>>Recently it appears that one or both of the front universal joints on my
>>'93 GC are starting to go bad (117Kmi). Are they replaceable like a
>>typical universals (press them out or do I need to purchase rebuilt axle
>>stubs?
>>
>>WB