Hello, I'm looking for some thoughts & recommendations on a good aftermarket
catback exhaust.

I crunched my existing one (Borla) on a nice rock last week while out elk
hunting.

But to be honest, I never really liked the Borla model anyway. It was just
too darn loud for my taste. I'm now looking at either going back to the
stock catback, or with another aftermarket model based upon your
recommendations (if any).

I don't like loud exhausts nor care for the "cool" deeper sound, but would
like to keep the horsepower gains & better flow if possible.

Any experience with Gibson, Banks, etc?

Thanks in advance,

Terry
92YJ
(bout the only thing left original is the engine & tranny)

 

Terry Jeffrey did pass the time by typing:
> Hello, I'm looking for some thoughts & recommendations on a good aftermarket
> catback exhaust.

> Any experience with Gibson, Banks, etc?

You can hear the gibson at my site. I like it, not too loud.
http://members.***.net/wilsond/vroom.avi
That's just startup, idle, and shutdown. But it gives you an idea
of what it sounds like. Recording was taken about 2' away from the
pipe.

--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!

 

Terry Jeffrey did pass the time by typing:
> Hello, I'm looking for some thoughts & recommendations on a good aftermarket
> catback exhaust.

> Any experience with Gibson, Banks, etc?

You can hear the gibson at my site. I like it, not too loud.
http://members.***.net/wilsond/vroom.avi
That's just startup, idle, and shutdown. But it gives you an idea
of what it sounds like. Recording was taken about 2' away from the
pipe.

--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!

 

Terry Jeffrey did pass the time by typing:
> Hello, I'm looking for some thoughts & recommendations on a good aftermarket
> catback exhaust.

> Any experience with Gibson, Banks, etc?

You can hear the gibson at my site. I like it, not too loud.
http://members.***.net/wilsond/vroom.avi
That's just startup, idle, and shutdown. But it gives you an idea
of what it sounds like. Recording was taken about 2' away from the
pipe.

--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!

 

Thanks Doug.

I'll go to your site and listen to it tomorrow at work. My sound card is
dead on this old PC at home.

Terry


"DougW" <post.replies@invalid.address> wrote in message
news:UHxld.100291$tU4.42037@okepread06...
> Terry Jeffrey did pass the time by typing:
> > Hello, I'm looking for some thoughts & recommendations on a good
aftermarket
> > catback exhaust.
>
> > Any experience with Gibson, Banks, etc?
>
> You can hear the gibson at my site. I like it, not too loud.
> http://members.***.net/wilsond/vroom.avi
> That's just startup, idle, and shutdown. But it gives you an idea
> of what it sounds like. Recording was taken about 2' away from the
> pipe.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
>



Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

 

Thanks Doug.

I'll go to your site and listen to it tomorrow at work. My sound card is
dead on this old PC at home.

Terry


"DougW" <post.replies@invalid.address> wrote in message
news:UHxld.100291$tU4.42037@okepread06...
> Terry Jeffrey did pass the time by typing:
> > Hello, I'm looking for some thoughts & recommendations on a good
aftermarket
> > catback exhaust.
>
> > Any experience with Gibson, Banks, etc?
>
> You can hear the gibson at my site. I like it, not too loud.
> http://members.***.net/wilsond/vroom.avi
> That's just startup, idle, and shutdown. But it gives you an idea
> of what it sounds like. Recording was taken about 2' away from the
> pipe.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
>



Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

 

Thanks Doug.

I'll go to your site and listen to it tomorrow at work. My sound card is
dead on this old PC at home.

Terry


"DougW" <post.replies@invalid.address> wrote in message
news:UHxld.100291$tU4.42037@okepread06...
> Terry Jeffrey did pass the time by typing:
> > Hello, I'm looking for some thoughts & recommendations on a good
aftermarket
> > catback exhaust.
>
> > Any experience with Gibson, Banks, etc?
>
> You can hear the gibson at my site. I like it, not too loud.
> http://members.***.net/wilsond/vroom.avi
> That's just startup, idle, and shutdown. But it gives you an idea
> of what it sounds like. Recording was taken about 2' away from the
> pipe.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
>



Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com