cat backs
03-26-2007 | 12:41 PM
#2
Guest
Posts: n/a
Re: cat backs
"j" <johnhuebner@yahoo.com> wrote in message
news:1174919599.657558.32350@b75g2000hsg.googlegro ups.com...
> 95 wrangler with the four banger. the muffler is toast. need a cat
> back. who has the best? is stainless worth the price?
>
Borland. Stainless doesn't rust, but it does dent. It's slippery too, so
you have to check the clamps periodically as the joints will loosen up.
With non-stainless the joints will rust together and then you are fine until
the muffler gets a big rust hole in it. Stainless is definitely worth the
price unless you like replacing exhaust components. "Aluminized" mufflers
and exhaust components aren't worth crap.
Earle
news:1174919599.657558.32350@b75g2000hsg.googlegro ups.com...
> 95 wrangler with the four banger. the muffler is toast. need a cat
> back. who has the best? is stainless worth the price?
>
Borland. Stainless doesn't rust, but it does dent. It's slippery too, so
you have to check the clamps periodically as the joints will loosen up.
With non-stainless the joints will rust together and then you are fine until
the muffler gets a big rust hole in it. Stainless is definitely worth the
price unless you like replacing exhaust components. "Aluminized" mufflers
and exhaust components aren't worth crap.
Earle
03-26-2007 | 12:41 PM
#3
Guest
Posts: n/a
Re: cat backs
"j" <johnhuebner@yahoo.com> wrote in message
news:1174919599.657558.32350@b75g2000hsg.googlegro ups.com...
> 95 wrangler with the four banger. the muffler is toast. need a cat
> back. who has the best? is stainless worth the price?
>
Borland. Stainless doesn't rust, but it does dent. It's slippery too, so
you have to check the clamps periodically as the joints will loosen up.
With non-stainless the joints will rust together and then you are fine until
the muffler gets a big rust hole in it. Stainless is definitely worth the
price unless you like replacing exhaust components. "Aluminized" mufflers
and exhaust components aren't worth crap.
Earle
news:1174919599.657558.32350@b75g2000hsg.googlegro ups.com...
> 95 wrangler with the four banger. the muffler is toast. need a cat
> back. who has the best? is stainless worth the price?
>
Borland. Stainless doesn't rust, but it does dent. It's slippery too, so
you have to check the clamps periodically as the joints will loosen up.
With non-stainless the joints will rust together and then you are fine until
the muffler gets a big rust hole in it. Stainless is definitely worth the
price unless you like replacing exhaust components. "Aluminized" mufflers
and exhaust components aren't worth crap.
Earle
03-26-2007 | 12:41 PM
#4
Guest
Posts: n/a
Re: cat backs
"j" <johnhuebner@yahoo.com> wrote in message
news:1174919599.657558.32350@b75g2000hsg.googlegro ups.com...
> 95 wrangler with the four banger. the muffler is toast. need a cat
> back. who has the best? is stainless worth the price?
>
Borland. Stainless doesn't rust, but it does dent. It's slippery too, so
you have to check the clamps periodically as the joints will loosen up.
With non-stainless the joints will rust together and then you are fine until
the muffler gets a big rust hole in it. Stainless is definitely worth the
price unless you like replacing exhaust components. "Aluminized" mufflers
and exhaust components aren't worth crap.
Earle
news:1174919599.657558.32350@b75g2000hsg.googlegro ups.com...
> 95 wrangler with the four banger. the muffler is toast. need a cat
> back. who has the best? is stainless worth the price?
>
Borland. Stainless doesn't rust, but it does dent. It's slippery too, so
you have to check the clamps periodically as the joints will loosen up.
With non-stainless the joints will rust together and then you are fine until
the muffler gets a big rust hole in it. Stainless is definitely worth the
price unless you like replacing exhaust components. "Aluminized" mufflers
and exhaust components aren't worth crap.
Earle
03-26-2007 | 07:35 PM
#5
Guest
Posts: n/a
Re: cat backs
Earle Horton wrote:
> "j" wrote ...
>> 95 wrangler with the four banger. the muffler is toast. need a cat
>> back. who has the best? is stainless worth the price?
>>
>
> Borland. Stainless doesn't rust, but it does dent. It's slippery
> too, so you have to check the clamps periodically as the joints will
> loosen up. With non-stainless the joints will rust together and then
> you are fine until the muffler gets a big rust hole in it. Stainless
> is definitely worth the price unless you like replacing exhaust
> components. "Aluminized" mufflers and exhaust components aren't
> worth crap.
I went with the Aluminized Gibson, sure it's a bit rusty but the waranty
was the same. The stainless was neat, but I'm going to drag the muffler
on rocks so why go shiny? :) They did throw in a shiny polished stainless
muffler tip. Good for another 5hp. ^_^
As for slipping, I just had a local shop throw a couple of spot welds
on the pipes. Easy enough to grind off if something needs to be moved.
--
DougW
> "j" wrote ...
>> 95 wrangler with the four banger. the muffler is toast. need a cat
>> back. who has the best? is stainless worth the price?
>>
>
> Borland. Stainless doesn't rust, but it does dent. It's slippery
> too, so you have to check the clamps periodically as the joints will
> loosen up. With non-stainless the joints will rust together and then
> you are fine until the muffler gets a big rust hole in it. Stainless
> is definitely worth the price unless you like replacing exhaust
> components. "Aluminized" mufflers and exhaust components aren't
> worth crap.
I went with the Aluminized Gibson, sure it's a bit rusty but the waranty
was the same. The stainless was neat, but I'm going to drag the muffler
on rocks so why go shiny? :) They did throw in a shiny polished stainless
muffler tip. Good for another 5hp. ^_^
As for slipping, I just had a local shop throw a couple of spot welds
on the pipes. Easy enough to grind off if something needs to be moved.
--
DougW
03-26-2007 | 07:35 PM
#6
Guest
Posts: n/a
Re: cat backs
Earle Horton wrote:
> "j" wrote ...
>> 95 wrangler with the four banger. the muffler is toast. need a cat
>> back. who has the best? is stainless worth the price?
>>
>
> Borland. Stainless doesn't rust, but it does dent. It's slippery
> too, so you have to check the clamps periodically as the joints will
> loosen up. With non-stainless the joints will rust together and then
> you are fine until the muffler gets a big rust hole in it. Stainless
> is definitely worth the price unless you like replacing exhaust
> components. "Aluminized" mufflers and exhaust components aren't
> worth crap.
I went with the Aluminized Gibson, sure it's a bit rusty but the waranty
was the same. The stainless was neat, but I'm going to drag the muffler
on rocks so why go shiny? :) They did throw in a shiny polished stainless
muffler tip. Good for another 5hp. ^_^
As for slipping, I just had a local shop throw a couple of spot welds
on the pipes. Easy enough to grind off if something needs to be moved.
--
DougW
> "j" wrote ...
>> 95 wrangler with the four banger. the muffler is toast. need a cat
>> back. who has the best? is stainless worth the price?
>>
>
> Borland. Stainless doesn't rust, but it does dent. It's slippery
> too, so you have to check the clamps periodically as the joints will
> loosen up. With non-stainless the joints will rust together and then
> you are fine until the muffler gets a big rust hole in it. Stainless
> is definitely worth the price unless you like replacing exhaust
> components. "Aluminized" mufflers and exhaust components aren't
> worth crap.
I went with the Aluminized Gibson, sure it's a bit rusty but the waranty
was the same. The stainless was neat, but I'm going to drag the muffler
on rocks so why go shiny? :) They did throw in a shiny polished stainless
muffler tip. Good for another 5hp. ^_^
As for slipping, I just had a local shop throw a couple of spot welds
on the pipes. Easy enough to grind off if something needs to be moved.
--
DougW
03-26-2007 | 07:35 PM
#7
Guest
Posts: n/a
Re: cat backs
Earle Horton wrote:
> "j" wrote ...
>> 95 wrangler with the four banger. the muffler is toast. need a cat
>> back. who has the best? is stainless worth the price?
>>
>
> Borland. Stainless doesn't rust, but it does dent. It's slippery
> too, so you have to check the clamps periodically as the joints will
> loosen up. With non-stainless the joints will rust together and then
> you are fine until the muffler gets a big rust hole in it. Stainless
> is definitely worth the price unless you like replacing exhaust
> components. "Aluminized" mufflers and exhaust components aren't
> worth crap.
I went with the Aluminized Gibson, sure it's a bit rusty but the waranty
was the same. The stainless was neat, but I'm going to drag the muffler
on rocks so why go shiny? :) They did throw in a shiny polished stainless
muffler tip. Good for another 5hp. ^_^
As for slipping, I just had a local shop throw a couple of spot welds
on the pipes. Easy enough to grind off if something needs to be moved.
--
DougW
> "j" wrote ...
>> 95 wrangler with the four banger. the muffler is toast. need a cat
>> back. who has the best? is stainless worth the price?
>>
>
> Borland. Stainless doesn't rust, but it does dent. It's slippery
> too, so you have to check the clamps periodically as the joints will
> loosen up. With non-stainless the joints will rust together and then
> you are fine until the muffler gets a big rust hole in it. Stainless
> is definitely worth the price unless you like replacing exhaust
> components. "Aluminized" mufflers and exhaust components aren't
> worth crap.
I went with the Aluminized Gibson, sure it's a bit rusty but the waranty
was the same. The stainless was neat, but I'm going to drag the muffler
on rocks so why go shiny? :) They did throw in a shiny polished stainless
muffler tip. Good for another 5hp. ^_^
As for slipping, I just had a local shop throw a couple of spot welds
on the pipes. Easy enough to grind off if something needs to be moved.
--
DougW
03-26-2007 | 11:05 PM
#8
Guest
Posts: n/a
Re: cat backs
Earle Horton proclaimed:
> "j" <johnhuebner@yahoo.com> wrote in message
> news:1174919599.657558.32350@b75g2000hsg.googlegro ups.com...
>
>>95 wrangler with the four banger. the muffler is toast. need a cat
>>back. who has the best? is stainless worth the price?
>>
>
>
> Borland. Stainless doesn't rust, but it does dent. It's slippery too, so
> you have to check the clamps periodically as the joints will loosen up.
> With non-stainless the joints will rust together and then you are fine until
> the muffler gets a big rust hole in it. Stainless is definitely worth the
> price unless you like replacing exhaust components. "Aluminized" mufflers
> and exhaust components aren't worth crap.
>
> Earle
Yeah, I'd have to go with Borland too. That way you can just compile up
whatever exhaust you want and run it thru a development studio.
tsk, senility in the old is just so sad...
> "j" <johnhuebner@yahoo.com> wrote in message
> news:1174919599.657558.32350@b75g2000hsg.googlegro ups.com...
>
>>95 wrangler with the four banger. the muffler is toast. need a cat
>>back. who has the best? is stainless worth the price?
>>
>
>
> Borland. Stainless doesn't rust, but it does dent. It's slippery too, so
> you have to check the clamps periodically as the joints will loosen up.
> With non-stainless the joints will rust together and then you are fine until
> the muffler gets a big rust hole in it. Stainless is definitely worth the
> price unless you like replacing exhaust components. "Aluminized" mufflers
> and exhaust components aren't worth crap.
>
> Earle
Yeah, I'd have to go with Borland too. That way you can just compile up
whatever exhaust you want and run it thru a development studio.
tsk, senility in the old is just so sad...
03-26-2007 | 11:05 PM
#9
Guest
Posts: n/a
Re: cat backs
Earle Horton proclaimed:
> "j" <johnhuebner@yahoo.com> wrote in message
> news:1174919599.657558.32350@b75g2000hsg.googlegro ups.com...
>
>>95 wrangler with the four banger. the muffler is toast. need a cat
>>back. who has the best? is stainless worth the price?
>>
>
>
> Borland. Stainless doesn't rust, but it does dent. It's slippery too, so
> you have to check the clamps periodically as the joints will loosen up.
> With non-stainless the joints will rust together and then you are fine until
> the muffler gets a big rust hole in it. Stainless is definitely worth the
> price unless you like replacing exhaust components. "Aluminized" mufflers
> and exhaust components aren't worth crap.
>
> Earle
Yeah, I'd have to go with Borland too. That way you can just compile up
whatever exhaust you want and run it thru a development studio.
tsk, senility in the old is just so sad...
> "j" <johnhuebner@yahoo.com> wrote in message
> news:1174919599.657558.32350@b75g2000hsg.googlegro ups.com...
>
>>95 wrangler with the four banger. the muffler is toast. need a cat
>>back. who has the best? is stainless worth the price?
>>
>
>
> Borland. Stainless doesn't rust, but it does dent. It's slippery too, so
> you have to check the clamps periodically as the joints will loosen up.
> With non-stainless the joints will rust together and then you are fine until
> the muffler gets a big rust hole in it. Stainless is definitely worth the
> price unless you like replacing exhaust components. "Aluminized" mufflers
> and exhaust components aren't worth crap.
>
> Earle
Yeah, I'd have to go with Borland too. That way you can just compile up
whatever exhaust you want and run it thru a development studio.
tsk, senility in the old is just so sad...
03-26-2007 | 11:05 PM
#10
Guest
Posts: n/a
Re: cat backs
Earle Horton proclaimed:
> "j" <johnhuebner@yahoo.com> wrote in message
> news:1174919599.657558.32350@b75g2000hsg.googlegro ups.com...
>
>>95 wrangler with the four banger. the muffler is toast. need a cat
>>back. who has the best? is stainless worth the price?
>>
>
>
> Borland. Stainless doesn't rust, but it does dent. It's slippery too, so
> you have to check the clamps periodically as the joints will loosen up.
> With non-stainless the joints will rust together and then you are fine until
> the muffler gets a big rust hole in it. Stainless is definitely worth the
> price unless you like replacing exhaust components. "Aluminized" mufflers
> and exhaust components aren't worth crap.
>
> Earle
Yeah, I'd have to go with Borland too. That way you can just compile up
whatever exhaust you want and run it thru a development studio.
tsk, senility in the old is just so sad...
> "j" <johnhuebner@yahoo.com> wrote in message
> news:1174919599.657558.32350@b75g2000hsg.googlegro ups.com...
>
>>95 wrangler with the four banger. the muffler is toast. need a cat
>>back. who has the best? is stainless worth the price?
>>
>
>
> Borland. Stainless doesn't rust, but it does dent. It's slippery too, so
> you have to check the clamps periodically as the joints will loosen up.
> With non-stainless the joints will rust together and then you are fine until
> the muffler gets a big rust hole in it. Stainless is definitely worth the
> price unless you like replacing exhaust components. "Aluminized" mufflers
> and exhaust components aren't worth crap.
>
> Earle
Yeah, I'd have to go with Borland too. That way you can just compile up
whatever exhaust you want and run it thru a development studio.
tsk, senility in the old is just so sad...