I have a difficult brake light problem. This problem started some time ago.
My left brake light is intermittent. Sometimes it works, sometimes it
doesn't. I replaced the bulb. For a while, it worked ok. Then it is again
intermittent. But now, I have compounded the problem. Now, I cannot
rotate the brake light housing out of the entire rear light assembly, so
that I can check the bulb again or do other testing. I must have
reinstalled the bulb housing the wrong way, by twisting it in the wrong
direction, but it is so tight, I cannot possibly get the bulb housing out of
the light assembly.

Any ideas on this? Will I likely have to replace the entire light assembly
? If so, what is the best source for this ? I know there is a private
Chyrsler Parts company online or some name like that. Is that a good
source?

Today, I got stopped by a state trooper, and got a warning ticket for this !
Now, I really have to figure out this problem, but of course I really want
to have my brake lights working properly anyhow.

I would appreciate any advice or direction on this problem.

Thanks !!

--James--

 

http://www.chryslerpartsdirect.com/

http://www.jeepsareus.com/

http://www.trademotion.com/partlocat...?siteid=214295

http://jeeppartspeople.com/

http://allchryslerparts.com/

http://www.trademotion.com/partlocat...?siteid=214272

https://www.1stjeepparts.com/product...oducts_id/1033


I had one stick before, there is a gasket between the bulb holder and the
lamp assembly. I CAREFULLY turned it with a pair of pliers and before
reassembly I opened up each of the lamp units and gave the gasket a VERY
light coating of Wurth HHS2 by spraying on my finder and wiping it around.
DO not get any grease of skin oils on the bulbs themselves.

Check the bulb holder socket and bulb base for corrosion. Clean and grease
the contacts to prevent further oxidation.

http://www.imagestation.com/album/pi...?id=2118453445



"James" <no one@bellsouth.com> wrote in message
news:IsiWg.889$nn6.858@bignews6.bellsouth.net...
>
>
> I have a difficult brake light problem. This problem started some time
> ago. My left brake light is intermittent. Sometimes it works, sometimes
> it doesn't. I replaced the bulb. For a while, it worked ok. Then it is
> again intermittent. But now, I have compounded the problem. Now, I
> cannot rotate the brake light housing out of the entire rear light
> assembly, so that I can check the bulb again or do other testing. I
> must have reinstalled the bulb housing the wrong way, by twisting it in
> the wrong direction, but it is so tight, I cannot possibly get the bulb
> housing out of the light assembly.
>
> Any ideas on this? Will I likely have to replace the entire light
> assembly ? If so, what is the best source for this ? I know there is
> a private Chyrsler Parts company online or some name like that. Is that a
> good source?
>
> Today, I got stopped by a state trooper, and got a warning ticket for this
> ! Now, I really have to figure out this problem, but of course I really
> want to have my brake lights working properly anyhow.
>
> I would appreciate any advice or direction on this problem.
>
> Thanks !!
>
> --James--
>
>

 

http://www.chryslerpartsdirect.com/

http://www.jeepsareus.com/

http://www.trademotion.com/partlocat...?siteid=214295

http://jeeppartspeople.com/

http://allchryslerparts.com/

http://www.trademotion.com/partlocat...?siteid=214272

https://www.1stjeepparts.com/product...oducts_id/1033


I had one stick before, there is a gasket between the bulb holder and the
lamp assembly. I CAREFULLY turned it with a pair of pliers and before
reassembly I opened up each of the lamp units and gave the gasket a VERY
light coating of Wurth HHS2 by spraying on my finder and wiping it around.
DO not get any grease of skin oils on the bulbs themselves.

Check the bulb holder socket and bulb base for corrosion. Clean and grease
the contacts to prevent further oxidation.

http://www.imagestation.com/album/pi...?id=2118453445



"James" <no one@bellsouth.com> wrote in message
news:IsiWg.889$nn6.858@bignews6.bellsouth.net...
>
>
> I have a difficult brake light problem. This problem started some time
> ago. My left brake light is intermittent. Sometimes it works, sometimes
> it doesn't. I replaced the bulb. For a while, it worked ok. Then it is
> again intermittent. But now, I have compounded the problem. Now, I
> cannot rotate the brake light housing out of the entire rear light
> assembly, so that I can check the bulb again or do other testing. I
> must have reinstalled the bulb housing the wrong way, by twisting it in
> the wrong direction, but it is so tight, I cannot possibly get the bulb
> housing out of the light assembly.
>
> Any ideas on this? Will I likely have to replace the entire light
> assembly ? If so, what is the best source for this ? I know there is
> a private Chyrsler Parts company online or some name like that. Is that a
> good source?
>
> Today, I got stopped by a state trooper, and got a warning ticket for this
> ! Now, I really have to figure out this problem, but of course I really
> want to have my brake lights working properly anyhow.
>
> I would appreciate any advice or direction on this problem.
>
> Thanks !!
>
> --James--
>
>

 

http://www.chryslerpartsdirect.com/

http://www.jeepsareus.com/

http://www.trademotion.com/partlocat...?siteid=214295

http://jeeppartspeople.com/

http://allchryslerparts.com/

http://www.trademotion.com/partlocat...?siteid=214272

https://www.1stjeepparts.com/product...oducts_id/1033


I had one stick before, there is a gasket between the bulb holder and the
lamp assembly. I CAREFULLY turned it with a pair of pliers and before
reassembly I opened up each of the lamp units and gave the gasket a VERY
light coating of Wurth HHS2 by spraying on my finder and wiping it around.
DO not get any grease of skin oils on the bulbs themselves.

Check the bulb holder socket and bulb base for corrosion. Clean and grease
the contacts to prevent further oxidation.

http://www.imagestation.com/album/pi...?id=2118453445



"James" <no one@bellsouth.com> wrote in message
news:IsiWg.889$nn6.858@bignews6.bellsouth.net...
>
>
> I have a difficult brake light problem. This problem started some time
> ago. My left brake light is intermittent. Sometimes it works, sometimes
> it doesn't. I replaced the bulb. For a while, it worked ok. Then it is
> again intermittent. But now, I have compounded the problem. Now, I
> cannot rotate the brake light housing out of the entire rear light
> assembly, so that I can check the bulb again or do other testing. I
> must have reinstalled the bulb housing the wrong way, by twisting it in
> the wrong direction, but it is so tight, I cannot possibly get the bulb
> housing out of the light assembly.
>
> Any ideas on this? Will I likely have to replace the entire light
> assembly ? If so, what is the best source for this ? I know there is
> a private Chyrsler Parts company online or some name like that. Is that a
> good source?
>
> Today, I got stopped by a state trooper, and got a warning ticket for this
> ! Now, I really have to figure out this problem, but of course I really
> want to have my brake lights working properly anyhow.
>
> I would appreciate any advice or direction on this problem.
>
> Thanks !!
>
> --James--
>
>