I replaced the speed sensor, I no longer get a code 15 for No
speed/distance sensor signal, however, I still don't have a output to
my speedometer and I still stall when I'm in neutral while slowing
down.

The only codes I get back are a 12 and a 55.

I heard the term "indexing" the sensor... some alignmnet to the
housing, anyone know what / how to do this? It appears the sensor gear
has meshed ok inside the transfer case.


Any ideas on what to try next?

Thanks

 

Rotate it until the index points to the markings on the case that
coincide with the # of teeth on the speedo gear. You may have to go a
little one way or the other to get it to work. Mine has never worked
the first time after the couple times I have changed speedo gears.

Jerry

updawaz00@hotmail.com wrote:
> I replaced the speed sensor, I no longer get a code 15 for No
> speed/distance sensor signal, however, I still don't have a output to
> my speedometer and I still stall when I'm in neutral while slowing
> down.
>
> The only codes I get back are a 12 and a 55.
>
> I heard the term "indexing" the sensor... some alignmnet to the
> housing, anyone know what / how to do this? It appears the sensor gear
> has meshed ok inside the transfer case.
>
>
> Any ideas on what to try next?
>
> Thanks
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/

 

Rotate it until the index points to the markings on the case that
coincide with the # of teeth on the speedo gear. You may have to go a
little one way or the other to get it to work. Mine has never worked
the first time after the couple times I have changed speedo gears.

Jerry

updawaz00@hotmail.com wrote:
> I replaced the speed sensor, I no longer get a code 15 for No
> speed/distance sensor signal, however, I still don't have a output to
> my speedometer and I still stall when I'm in neutral while slowing
> down.
>
> The only codes I get back are a 12 and a 55.
>
> I heard the term "indexing" the sensor... some alignmnet to the
> housing, anyone know what / how to do this? It appears the sensor gear
> has meshed ok inside the transfer case.
>
>
> Any ideas on what to try next?
>
> Thanks
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/

 

Rotate it until the index points to the markings on the case that
coincide with the # of teeth on the speedo gear. You may have to go a
little one way or the other to get it to work. Mine has never worked
the first time after the couple times I have changed speedo gears.

Jerry

updawaz00@hotmail.com wrote:
> I replaced the speed sensor, I no longer get a code 15 for No
> speed/distance sensor signal, however, I still don't have a output to
> my speedometer and I still stall when I'm in neutral while slowing
> down.
>
> The only codes I get back are a 12 and a 55.
>
> I heard the term "indexing" the sensor... some alignmnet to the
> housing, anyone know what / how to do this? It appears the sensor gear
> has meshed ok inside the transfer case.
>
>
> Any ideas on what to try next?
>
> Thanks
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/

 

updawaz00@hotmail.com wrote:

>I heard the term "indexing" the sensor... some alignmnet to the
>housing, anyone know what / how to do this?

See the following pages for illustration:

http://www.sierrajeep.com/speedome.htm

http://www.stu-offroad.com/engine/speedo/speed1.htm

http://4x4xplor.com/speedo.html

 

updawaz00@hotmail.com wrote:

>I heard the term "indexing" the sensor... some alignmnet to the
>housing, anyone know what / how to do this?

See the following pages for illustration:

http://www.sierrajeep.com/speedome.htm

http://www.stu-offroad.com/engine/speedo/speed1.htm

http://4x4xplor.com/speedo.html

 

updawaz00@hotmail.com wrote:

>I heard the term "indexing" the sensor... some alignmnet to the
>housing, anyone know what / how to do this?

See the following pages for illustration:

http://www.sierrajeep.com/speedome.htm

http://www.stu-offroad.com/engine/speedo/speed1.htm

http://4x4xplor.com/speedo.html

 

Great!
This is what I need right below from:
http://4x4xplor.com/speedo.htm-l

"You will notice that there are a series of number located along the
side of the speedometer gear housing. Select the appropriate tooth gear
range you just installed and rotate it until it is aligned with the
raised dot on the transfer case as shown in the pic to the left." That
has been my question from the beginning and it is now resoved.

I think I need to change my gear anyway... it is marked 30 and my tires
are 31, stock rear (what is it?) .... it is not even on the chart.

Thanks

 

Great!
This is what I need right below from:
http://4x4xplor.com/speedo.htm-l

"You will notice that there are a series of number located along the
side of the speedometer gear housing. Select the appropriate tooth gear
range you just installed and rotate it until it is aligned with the
raised dot on the transfer case as shown in the pic to the left." That
has been my question from the beginning and it is now resoved.

I think I need to change my gear anyway... it is marked 30 and my tires
are 31, stock rear (what is it?) .... it is not even on the chart.

Thanks

 

Great!
This is what I need right below from:
http://4x4xplor.com/speedo.htm-l

"You will notice that there are a series of number located along the
side of the speedometer gear housing. Select the appropriate tooth gear
range you just installed and rotate it until it is aligned with the
raised dot on the transfer case as shown in the pic to the left." That
has been my question from the beginning and it is now resoved.

I think I need to change my gear anyway... it is marked 30 and my tires
are 31, stock rear (what is it?) .... it is not even on the chart.

Thanks