89 Cherokee 4.0L Crank Position Sensor? - Jeeps Canada

11-16-2003 | 11:41 AM

#1

LanceM

Guest

Posts: n/a

89 Cherokee 4.0L Crank Position Sensor?

In doing some research, this article caught my attn

http://www.motor.com/MAGAZINE/Articles/022003_06.htm

What type of CPS is used on the 89 Cherokee 4.0L? Something other than
3-wire Hall-Effect (am trying to figure out how engine was able to run
with reversed wires)?

Thank you,
Lance

--

alancemor...AT...yahoo...DOT...com

Reply

11-16-2003 | 12:10 PM

#2

Jerry Bransford

Guest

Posts: n/a

Re: 89 Cherokee 4.0L Crank Position Sensor?

The CPS is just a two-wire output that would work equally well with the
wiring reversed... it is producing an AC signal.

Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/

"LanceM" <spambucket@yahoo.com> wrote in message
news:PM0003CC3F52C9E011@arbitrary.net.digitex.net. ..
> In doing some research, this article caught my attn
>
> http://www.motor.com/MAGAZINE/Articles/022003_06.htm
>
> What type of CPS is used on the 89 Cherokee 4.0L? Something other than
> 3-wire Hall-Effect (am trying to figure out how engine was able to run
> with reversed wires)?
>
> Thank you,
> Lance
>
> --
>
> alancemor...AT...yahoo...DOT...com

Reply

11-16-2003 | 12:10 PM

#3

Jerry Bransford

Guest

Posts: n/a

Re: 89 Cherokee 4.0L Crank Position Sensor?

The CPS is just a two-wire output that would work equally well with the
wiring reversed... it is producing an AC signal.

Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/

"LanceM" <spambucket@yahoo.com> wrote in message
news:PM0003CC3F52C9E011@arbitrary.net.digitex.net. ..
> In doing some research, this article caught my attn
>
> http://www.motor.com/MAGAZINE/Articles/022003_06.htm
>
> What type of CPS is used on the 89 Cherokee 4.0L? Something other than
> 3-wire Hall-Effect (am trying to figure out how engine was able to run
> with reversed wires)?
>
> Thank you,
> Lance
>
> --
>
> alancemor...AT...yahoo...DOT...com

Reply

11-16-2003 | 12:10 PM

#4

Jerry Bransford

Guest

Posts: n/a

Re: 89 Cherokee 4.0L Crank Position Sensor?

The CPS is just a two-wire output that would work equally well with the
wiring reversed... it is producing an AC signal.

Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/

"LanceM" <spambucket@yahoo.com> wrote in message
news:PM0003CC3F52C9E011@arbitrary.net.digitex.net. ..
> In doing some research, this article caught my attn
>
> http://www.motor.com/MAGAZINE/Articles/022003_06.htm
>
> What type of CPS is used on the 89 Cherokee 4.0L? Something other than
> 3-wire Hall-Effect (am trying to figure out how engine was able to run
> with reversed wires)?
>
> Thank you,
> Lance
>
> --
>
> alancemor...AT...yahoo...DOT...com

Reply