4" Lift and no SYE
12-17-2004 | 06:55 PM
#1
Guest
Posts: n/a
4" Lift and no SYE
I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
suspension system, along with adjustable rear upper control arms. The
moons are aligned and I have access to hoist, but the problem is my
driveshaft wont be in for at least 2 weeks. In the instructions it
states that it does not reccommend installing the kit without the DS
and SYE. My question is can i get away without the SYE and DS for now
with just the transfer case drop and adjusting my rear pinion angle? I
have heard that the D44 with the 5 speed has the worst problems with
driveshaft vibration.
suspension system, along with adjustable rear upper control arms. The
moons are aligned and I have access to hoist, but the problem is my
driveshaft wont be in for at least 2 weeks. In the instructions it
states that it does not reccommend installing the kit without the DS
and SYE. My question is can i get away without the SYE and DS for now
with just the transfer case drop and adjusting my rear pinion angle? I
have heard that the D44 with the 5 speed has the worst problems with
driveshaft vibration.
12-17-2004 | 07:42 PM
#2
Guest
Posts: n/a
Re: 4" Lift and no SYE
If you are going to park it afterwards, then go ahead.
Instructions say don't do it for reasons beyond wanting to sell more
hardware!
See earlier conversation:
"Just did OME suspension change on TJ"
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"sunofafish" wrote in message ...
> I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.
Instructions say don't do it for reasons beyond wanting to sell more
hardware!
See earlier conversation:
"Just did OME suspension change on TJ"
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"sunofafish" wrote in message ...
> I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.
12-17-2004 | 07:42 PM
#3
Guest
Posts: n/a
Re: 4" Lift and no SYE
If you are going to park it afterwards, then go ahead.
Instructions say don't do it for reasons beyond wanting to sell more
hardware!
See earlier conversation:
"Just did OME suspension change on TJ"
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"sunofafish" wrote in message ...
> I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.
Instructions say don't do it for reasons beyond wanting to sell more
hardware!
See earlier conversation:
"Just did OME suspension change on TJ"
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"sunofafish" wrote in message ...
> I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.
12-17-2004 | 07:42 PM
#4
Guest
Posts: n/a
Re: 4" Lift and no SYE
If you are going to park it afterwards, then go ahead.
Instructions say don't do it for reasons beyond wanting to sell more
hardware!
See earlier conversation:
"Just did OME suspension change on TJ"
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"sunofafish" wrote in message ...
> I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.
Instructions say don't do it for reasons beyond wanting to sell more
hardware!
See earlier conversation:
"Just did OME suspension change on TJ"
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"sunofafish" wrote in message ...
> I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.
12-17-2004 | 08:06 PM
#5
Guest
Posts: n/a
Re: 4" Lift and no SYE
http://7slotgrille.com/tech/sye2/index.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
sunofafish wrote:
>
> I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
sunofafish wrote:
>
> I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.
12-17-2004 | 08:06 PM
#6
Guest
Posts: n/a
Re: 4" Lift and no SYE
http://7slotgrille.com/tech/sye2/index.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
sunofafish wrote:
>
> I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
sunofafish wrote:
>
> I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.
12-17-2004 | 08:06 PM
#7
Guest
Posts: n/a
Re: 4" Lift and no SYE
http://7slotgrille.com/tech/sye2/index.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
sunofafish wrote:
>
> I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
sunofafish wrote:
>
> I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.
12-17-2004 | 08:24 PM
#8
Guest
Posts: n/a
Re: 4" Lift and no SYE
Don't even think about it, SYEs & CV rear shafts are relatively inexpensive
and one of the best mods you can perform on a lifted SWB Jeep. You can do
it in your garage without pulling the t-case, just pull the yokes, split the
case halves and replace the tailshaft, etc.
"sunofafish" <bigcoupee@hotmail.com> wrote in message
news:b2e6fd3e.0412171455.ed68012@posting.google.co m...
>I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.
and one of the best mods you can perform on a lifted SWB Jeep. You can do
it in your garage without pulling the t-case, just pull the yokes, split the
case halves and replace the tailshaft, etc.
"sunofafish" <bigcoupee@hotmail.com> wrote in message
news:b2e6fd3e.0412171455.ed68012@posting.google.co m...
>I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.
12-17-2004 | 08:24 PM
#9
Guest
Posts: n/a
Re: 4" Lift and no SYE
Don't even think about it, SYEs & CV rear shafts are relatively inexpensive
and one of the best mods you can perform on a lifted SWB Jeep. You can do
it in your garage without pulling the t-case, just pull the yokes, split the
case halves and replace the tailshaft, etc.
"sunofafish" <bigcoupee@hotmail.com> wrote in message
news:b2e6fd3e.0412171455.ed68012@posting.google.co m...
>I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.
and one of the best mods you can perform on a lifted SWB Jeep. You can do
it in your garage without pulling the t-case, just pull the yokes, split the
case halves and replace the tailshaft, etc.
"sunofafish" <bigcoupee@hotmail.com> wrote in message
news:b2e6fd3e.0412171455.ed68012@posting.google.co m...
>I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.
12-17-2004 | 08:24 PM
#10
Guest
Posts: n/a
Re: 4" Lift and no SYE
Don't even think about it, SYEs & CV rear shafts are relatively inexpensive
and one of the best mods you can perform on a lifted SWB Jeep. You can do
it in your garage without pulling the t-case, just pull the yokes, split the
case halves and replace the tailshaft, etc.
"sunofafish" <bigcoupee@hotmail.com> wrote in message
news:b2e6fd3e.0412171455.ed68012@posting.google.co m...
>I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.
and one of the best mods you can perform on a lifted SWB Jeep. You can do
it in your garage without pulling the t-case, just pull the yokes, split the
case halves and replace the tailshaft, etc.
"sunofafish" <bigcoupee@hotmail.com> wrote in message
news:b2e6fd3e.0412171455.ed68012@posting.google.co m...
>I have an 01 TJ, 6cyl, D44, 5 Speed. I purchased the teraflex S4t
> suspension system, along with adjustable rear upper control arms. The
> moons are aligned and I have access to hoist, but the problem is my
> driveshaft wont be in for at least 2 weeks. In the instructions it
> states that it does not reccommend installing the kit without the DS
> and SYE. My question is can i get away without the SYE and DS for now
> with just the transfer case drop and adjusting my rear pinion angle? I
> have heard that the D44 with the 5 speed has the worst problems with
> driveshaft vibration.