4" lift kit Extends Wheel base?
05-05-2004 | 02:40 PM
#2
Guest
Posts: n/a
Re: 4" lift kit Extends Wheel base?
There's a good chance the lift altered your caster angle. If it did that can
affect you turning rqadiius significantly. Easy to check on a proper
alignment rack. I have a 4.5" RE kit on my YJ, had to put 2 degree steel
shims on the front to get it back into spec.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c7b4i7$1s540$1@ID-193866.news.uni-berlin.de...
> I noiced since I put my 4" lift kit on I don't have the turning radius I
> used to. Is this a norm?
>
>
> Thanks,
>
> Bill
>
>
affect you turning rqadiius significantly. Easy to check on a proper
alignment rack. I have a 4.5" RE kit on my YJ, had to put 2 degree steel
shims on the front to get it back into spec.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c7b4i7$1s540$1@ID-193866.news.uni-berlin.de...
> I noiced since I put my 4" lift kit on I don't have the turning radius I
> used to. Is this a norm?
>
>
> Thanks,
>
> Bill
>
>
05-05-2004 | 02:40 PM
#3
Guest
Posts: n/a
Re: 4" lift kit Extends Wheel base?
There's a good chance the lift altered your caster angle. If it did that can
affect you turning rqadiius significantly. Easy to check on a proper
alignment rack. I have a 4.5" RE kit on my YJ, had to put 2 degree steel
shims on the front to get it back into spec.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c7b4i7$1s540$1@ID-193866.news.uni-berlin.de...
> I noiced since I put my 4" lift kit on I don't have the turning radius I
> used to. Is this a norm?
>
>
> Thanks,
>
> Bill
>
>
affect you turning rqadiius significantly. Easy to check on a proper
alignment rack. I have a 4.5" RE kit on my YJ, had to put 2 degree steel
shims on the front to get it back into spec.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c7b4i7$1s540$1@ID-193866.news.uni-berlin.de...
> I noiced since I put my 4" lift kit on I don't have the turning radius I
> used to. Is this a norm?
>
>
> Thanks,
>
> Bill
>
>
05-05-2004 | 02:40 PM
#4
Guest
Posts: n/a
Re: 4" lift kit Extends Wheel base?
There's a good chance the lift altered your caster angle. If it did that can
affect you turning rqadiius significantly. Easy to check on a proper
alignment rack. I have a 4.5" RE kit on my YJ, had to put 2 degree steel
shims on the front to get it back into spec.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c7b4i7$1s540$1@ID-193866.news.uni-berlin.de...
> I noiced since I put my 4" lift kit on I don't have the turning radius I
> used to. Is this a norm?
>
>
> Thanks,
>
> Bill
>
>
affect you turning rqadiius significantly. Easy to check on a proper
alignment rack. I have a 4.5" RE kit on my YJ, had to put 2 degree steel
shims on the front to get it back into spec.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c7b4i7$1s540$1@ID-193866.news.uni-berlin.de...
> I noiced since I put my 4" lift kit on I don't have the turning radius I
> used to. Is this a norm?
>
>
> Thanks,
>
> Bill
>
>
05-05-2004 | 02:40 PM
#5
Guest
Posts: n/a
Re: 4" lift kit Extends Wheel base?
There's a good chance the lift altered your caster angle. If it did that can
affect you turning rqadiius significantly. Easy to check on a proper
alignment rack. I have a 4.5" RE kit on my YJ, had to put 2 degree steel
shims on the front to get it back into spec.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c7b4i7$1s540$1@ID-193866.news.uni-berlin.de...
> I noiced since I put my 4" lift kit on I don't have the turning radius I
> used to. Is this a norm?
>
>
> Thanks,
>
> Bill
>
>
affect you turning rqadiius significantly. Easy to check on a proper
alignment rack. I have a 4.5" RE kit on my YJ, had to put 2 degree steel
shims on the front to get it back into spec.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c7b4i7$1s540$1@ID-193866.news.uni-berlin.de...
> I noiced since I put my 4" lift kit on I don't have the turning radius I
> used to. Is this a norm?
>
>
> Thanks,
>
> Bill
>
>
05-05-2004 | 03:42 PM
#6
Guest
Posts: n/a
Re: 4" lift kit Extends Wheel base?
Cool, thanks for the info.
Bill
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:c7b8uq0k9v@enews4.newsguy.com...
> There's a good chance the lift altered your caster angle. If it did that
can
> affect you turning rqadiius significantly. Easy to check on a proper
> alignment rack. I have a 4.5" RE kit on my YJ, had to put 2 degree steel
> shims on the front to get it back into spec.
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:c7b4i7$1s540$1@ID-193866.news.uni-berlin.de...
> > I noiced since I put my 4" lift kit on I don't have the turning radius I
> > used to. Is this a norm?
> >
> >
> > Thanks,
> >
> > Bill
> >
> >
>
>
Bill
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:c7b8uq0k9v@enews4.newsguy.com...
> There's a good chance the lift altered your caster angle. If it did that
can
> affect you turning rqadiius significantly. Easy to check on a proper
> alignment rack. I have a 4.5" RE kit on my YJ, had to put 2 degree steel
> shims on the front to get it back into spec.
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:c7b4i7$1s540$1@ID-193866.news.uni-berlin.de...
> > I noiced since I put my 4" lift kit on I don't have the turning radius I
> > used to. Is this a norm?
> >
> >
> > Thanks,
> >
> > Bill
> >
> >
>
>
05-05-2004 | 03:42 PM
#7
Guest
Posts: n/a
Re: 4" lift kit Extends Wheel base?
Cool, thanks for the info.
Bill
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:c7b8uq0k9v@enews4.newsguy.com...
> There's a good chance the lift altered your caster angle. If it did that
can
> affect you turning rqadiius significantly. Easy to check on a proper
> alignment rack. I have a 4.5" RE kit on my YJ, had to put 2 degree steel
> shims on the front to get it back into spec.
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:c7b4i7$1s540$1@ID-193866.news.uni-berlin.de...
> > I noiced since I put my 4" lift kit on I don't have the turning radius I
> > used to. Is this a norm?
> >
> >
> > Thanks,
> >
> > Bill
> >
> >
>
>
Bill
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:c7b8uq0k9v@enews4.newsguy.com...
> There's a good chance the lift altered your caster angle. If it did that
can
> affect you turning rqadiius significantly. Easy to check on a proper
> alignment rack. I have a 4.5" RE kit on my YJ, had to put 2 degree steel
> shims on the front to get it back into spec.
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:c7b4i7$1s540$1@ID-193866.news.uni-berlin.de...
> > I noiced since I put my 4" lift kit on I don't have the turning radius I
> > used to. Is this a norm?
> >
> >
> > Thanks,
> >
> > Bill
> >
> >
>
>
05-05-2004 | 03:42 PM
#8
Guest
Posts: n/a
Re: 4" lift kit Extends Wheel base?
Cool, thanks for the info.
Bill
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:c7b8uq0k9v@enews4.newsguy.com...
> There's a good chance the lift altered your caster angle. If it did that
can
> affect you turning rqadiius significantly. Easy to check on a proper
> alignment rack. I have a 4.5" RE kit on my YJ, had to put 2 degree steel
> shims on the front to get it back into spec.
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:c7b4i7$1s540$1@ID-193866.news.uni-berlin.de...
> > I noiced since I put my 4" lift kit on I don't have the turning radius I
> > used to. Is this a norm?
> >
> >
> > Thanks,
> >
> > Bill
> >
> >
>
>
Bill
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:c7b8uq0k9v@enews4.newsguy.com...
> There's a good chance the lift altered your caster angle. If it did that
can
> affect you turning rqadiius significantly. Easy to check on a proper
> alignment rack. I have a 4.5" RE kit on my YJ, had to put 2 degree steel
> shims on the front to get it back into spec.
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:c7b4i7$1s540$1@ID-193866.news.uni-berlin.de...
> > I noiced since I put my 4" lift kit on I don't have the turning radius I
> > used to. Is this a norm?
> >
> >
> > Thanks,
> >
> > Bill
> >
> >
>
>
05-05-2004 | 03:42 PM
#9
Guest
Posts: n/a
Re: 4" lift kit Extends Wheel base?
Cool, thanks for the info.
Bill
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:c7b8uq0k9v@enews4.newsguy.com...
> There's a good chance the lift altered your caster angle. If it did that
can
> affect you turning rqadiius significantly. Easy to check on a proper
> alignment rack. I have a 4.5" RE kit on my YJ, had to put 2 degree steel
> shims on the front to get it back into spec.
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:c7b4i7$1s540$1@ID-193866.news.uni-berlin.de...
> > I noiced since I put my 4" lift kit on I don't have the turning radius I
> > used to. Is this a norm?
> >
> >
> > Thanks,
> >
> > Bill
> >
> >
>
>
Bill
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:c7b8uq0k9v@enews4.newsguy.com...
> There's a good chance the lift altered your caster angle. If it did that
can
> affect you turning rqadiius significantly. Easy to check on a proper
> alignment rack. I have a 4.5" RE kit on my YJ, had to put 2 degree steel
> shims on the front to get it back into spec.
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:c7b4i7$1s540$1@ID-193866.news.uni-berlin.de...
> > I noiced since I put my 4" lift kit on I don't have the turning radius I
> > used to. Is this a norm?
> >
> >
> > Thanks,
> >
> > Bill
> >
> >
>
>
05-05-2004 | 04:15 PM
#10
Guest
Posts: n/a
Re: 4" lift kit Extends Wheel base?
Shouldn't. The turning radius is controlled by the knuckle stops
and a very tiny bit by the castor.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I noiced since I put my 4" lift kit on I don't have the turning radius I
> used to. Is this a norm?
>
> Thanks,
>
> Bill
and a very tiny bit by the castor.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I noiced since I put my 4" lift kit on I don't have the turning radius I
> used to. Is this a norm?
>
> Thanks,
>
> Bill