Hi all....

I am in the midst of getting my 81 CJ7 on the road. The fuel pump has been
replaced and I now have to set up the carb. I once saw a link to a document
regarding the set-up of the carb. Can anyone help here?

Also I want to by-pass the computer emission control junk completely. Does
anyone have any info on this. In Ontario where I live, vehicles over 20
years do not need to have an emissions test, so removing the associated
equipment is not a problem.

Please let me know.

Many thanks in advance.



--
Cannon
'81 258 CJ7
92 Burb
02 Burb

http://209.250.129.61/cj7/cjhome.htm

 

I think you're talking about a nutter bypass...
http://www.4x4wire.com/jeep/tech/ele...jn-ignition99/



"Cannon (O|||||||O)" <youcantspamme@dumbbot.com> wrote in message
news:bg46cn$a5p$1@news1.mountaincable.net...
> Hi all....
>
> I am in the midst of getting my 81 CJ7 on the road. The fuel pump has been
> replaced and I now have to set up the carb. I once saw a link to a
document
> regarding the set-up of the carb. Can anyone help here?
>
> Also I want to by-pass the computer emission control junk completely. Does
> anyone have any info on this. In Ontario where I live, vehicles over 20
> years do not need to have an emissions test, so removing the associated
> equipment is not a problem.
>
> Please let me know.
>
> Many thanks in advance.
>
>
>
> --
> Cannon
> '81 258 CJ7
> 92 Burb
> 02 Burb
>
> http://209.250.129.61/cj7/cjhome.htm
>
>
>
>

 

Many thanks guys! I will let you know how it goes.

--
Cannon
'81 258 CJ7
92 Burb
02 Burb

http://209.250.129.61/cj7/cjhome.htm


"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F26A948.4C3A133F@sympatico.ca...
> Canadian Tire sells kits for the carb, about $20.00.
>
> They need a kit every couple years or every major tune-up.
>
> The kit comes with good setup directions.
>
> The carb has these idle tubes inside with crimped ends that physically
> clog up. Carb cleaner won't clean them, they need to be physically
> reamed out.
>
> If these idle tubes are even slightly clogged, the carb mix will 'never'
> set stable. It will be different every time you start it up. Here is a
> link on the idle tubes:
>
> http://www.off-road.com/jeep/tech/engine/carter.html
>
> Here is a link on putting the computer out of your misery:
>
> http://home.sprynet.com/~dale02/ignmods.htm
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> "Cannon (O|||||||O)" wrote:
> >
> > Hi all....
> >
> > I am in the midst of getting my 81 CJ7 on the road. The fuel pump has
been
> > replaced and I now have to set up the carb. I once saw a link to a
document
> > regarding the set-up of the carb. Can anyone help here?
> >
> > Also I want to by-pass the computer emission control junk completely.
Does
> > anyone have any info on this. In Ontario where I live, vehicles over 20
> > years do not need to have an emissions test, so removing the associated
> > equipment is not a problem.
> >
> > Please let me know.
> >
> > Many thanks in advance.
> >
> > --
> > Cannon
> > '81 258 CJ7
> > 92 Burb
> > 02 Burb
> >
> > http://209.250.129.61/cj7/cjhome.htm

 

wouldn't happen to be passing through Yuba City, Ca sometime, would you?????

--
Carlo F. Serusa, Jr. RPh
carlo.jr@comcast.net
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang


"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F26F4C6.EF195D8A@sympatico.ca...
> Where in Ontario are you?
>
> If you are close to TO, I am just stuck home here for the summer bored
> half out of my skull due to being a passenger in a car accident, can't
> help mush with the physical work, but can sure point if you need a hand.
>
> Helped Steve Seppala from this group and a friend of his do a
> driveshaft, tie rod end, front end alignment, route the emissions
> plumbing right, and put a carb kit in his friend's 82 a week ago. They
> brought the beer and BBQ and I brought my brains, moral support, tools
> and mouth... ;-)
>
> I am pretty good at 'tweaking' carbs and routing emissions plumbing
> properly. The ones I have personally set up with the computer dump have
> even passed emissions.
>
> Oh, I just noticed you have an 81, you have no computer to mess with and
> a carb that is 'easy' to set up, Bonus!
>
> Ignore the 'Nutter' stuff.
>
> There also is a bunch of us from this newsgroup that go out on deep bush
> runs in the Bancroft area two or three or more times a year. 'Family'
> style vacation trips usually with wives and kids of all ages along.
> Crown land camping with nice beaches and fishing.
>
> One trip is planned for the first week in Sept. including the long
> weekend as a finish. Some folks come for the first weekend, some the
> whole 10 days and some just for the long weekend.
>
> I am just going to be a beach bum and 'maybe' be able to canoe and fish
> this year, can't off road.
>
> If you are interested, email me for more details.
>
> Here is a link to the last two summers runs in the same place:
>
> Aug/02 http://www.imagestation.com/album/?id=4291402603
>
> Aug/01 http://www.imagestation.com/album/?id=4292076845
>
> Mike
>
> "Cannon (O|||||||O)" wrote:
> >
> > Many thanks guys! I will let you know how it goes.
> >
> > --
> > Cannon
> > '81 258 CJ7
> > 92 Burb
> > 02 Burb
> >
> > http://209.250.129.61/cj7/cjhome.htm
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:3F26A948.4C3A133F@sympatico.ca...
> > > Canadian Tire sells kits for the carb, about $20.00.
> > >
> > > They need a kit every couple years or every major tune-up.
> > >
> > > The kit comes with good setup directions.
> > >
> > > The carb has these idle tubes inside with crimped ends that physically
> > > clog up. Carb cleaner won't clean them, they need to be physically
> > > reamed out.
> > >
> > > If these idle tubes are even slightly clogged, the carb mix will
'never'
> > > set stable. It will be different every time you start it up. Here is
a
> > > link on the idle tubes:
> > >
> > > http://www.off-road.com/jeep/tech/engine/carter.html
> > >
> > > Here is a link on putting the computer out of your misery:
> > >
> > > http://home.sprynet.com/~dale02/ignmods.htm
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > "Cannon (O|||||||O)" wrote:
> > > >
> > > > Hi all....
> > > >
> > > > I am in the midst of getting my 81 CJ7 on the road. The fuel pump
has
> > been
> > > > replaced and I now have to set up the carb. I once saw a link to a
> > document
> > > > regarding the set-up of the carb. Can anyone help here?
> > > >
> > > > Also I want to by-pass the computer emission control junk
completely.
> > Does
> > > > anyone have any info on this. In Ontario where I live, vehicles over
20
> > > > years do not need to have an emissions test, so removing the
associated
> > > > equipment is not a problem.
> > > >
> > > > Please let me know.
> > > >
> > > > Many thanks in advance.
> > > >
> > > > --
> > > > Cannon
> > > > '81 258 CJ7
> > > > 92 Burb
> > > > 02 Burb
> > > >
> > > > http://209.250.129.61/cj7/cjhome.htm

 

Mike,

I'm in Whitby and I had a little engine fire not too long ago and she just
hasn't worked right since. Up the street from me there is both a beer store
and a butcher which sells great 1.5 pound steaks. I'd love a hand one
weekend in bypassing the computer and double checking the vacuum lines.

Jay
84 CJ7
33x12.5 MTR's





"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F26F4C6.EF195D8A@sympatico.ca...
> Where in Ontario are you?
>
> If you are close to TO, I am just stuck home here for the summer bored
> half out of my skull due to being a passenger in a car accident, can't
> help mush with the physical work, but can sure point if you need a hand.
>
> Helped Steve Seppala from this group and a friend of his do a
> driveshaft, tie rod end, front end alignment, route the emissions
> plumbing right, and put a carb kit in his friend's 82 a week ago. They
> brought the beer and BBQ and I brought my brains, moral support, tools
> and mouth... ;-)
>
> I am pretty good at 'tweaking' carbs and routing emissions plumbing
> properly. The ones I have personally set up with the computer dump have
> even passed emissions.
>
> Oh, I just noticed you have an 81, you have no computer to mess with and
> a carb that is 'easy' to set up, Bonus!
>
> Ignore the 'Nutter' stuff.
>
> There also is a bunch of us from this newsgroup that go out on deep bush
> runs in the Bancroft area two or three or more times a year. 'Family'
> style vacation trips usually with wives and kids of all ages along.
> Crown land camping with nice beaches and fishing.
>
> One trip is planned for the first week in Sept. including the long
> weekend as a finish. Some folks come for the first weekend, some the
> whole 10 days and some just for the long weekend.
>
> I am just going to be a beach bum and 'maybe' be able to canoe and fish
> this year, can't off road.
>
> If you are interested, email me for more details.
>
> Here is a link to the last two summers runs in the same place:
>
> Aug/02 http://www.imagestation.com/album/?id=4291402603
>
> Aug/01 http://www.imagestation.com/album/?id=4292076845
>
> Mike
>
> "Cannon (O|||||||O)" wrote:
> >
> > Many thanks guys! I will let you know how it goes.
> >
> > --
> > Cannon
> > '81 258 CJ7
> > 92 Burb
> > 02 Burb
> >
> > http://209.250.129.61/cj7/cjhome.htm
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:3F26A948.4C3A133F@sympatico.ca...
> > > Canadian Tire sells kits for the carb, about $20.00.
> > >
> > > They need a kit every couple years or every major tune-up.
> > >
> > > The kit comes with good setup directions.
> > >
> > > The carb has these idle tubes inside with crimped ends that physically
> > > clog up. Carb cleaner won't clean them, they need to be physically
> > > reamed out.
> > >
> > > If these idle tubes are even slightly clogged, the carb mix will
'never'
> > > set stable. It will be different every time you start it up. Here is
a
> > > link on the idle tubes:
> > >
> > > http://www.off-road.com/jeep/tech/engine/carter.html
> > >
> > > Here is a link on putting the computer out of your misery:
> > >
> > > http://home.sprynet.com/~dale02/ignmods.htm
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > "Cannon (O|||||||O)" wrote:
> > > >
> > > > Hi all....
> > > >
> > > > I am in the midst of getting my 81 CJ7 on the road. The fuel pump
has
> > been
> > > > replaced and I now have to set up the carb. I once saw a link to a
> > document
> > > > regarding the set-up of the carb. Can anyone help here?
> > > >
> > > > Also I want to by-pass the computer emission control junk
completely.
> > Does
> > > > anyone have any info on this. In Ontario where I live, vehicles over
20
> > > > years do not need to have an emissions test, so removing the
associated
> > > > equipment is not a problem.
> > > >
> > > > Please let me know.
> > > >
> > > > Many thanks in advance.
> > > >
> > > > --
> > > > Cannon
> > > > '81 258 CJ7
> > > > 92 Burb
> > > > 02 Burb
> > > >
> > > > http://209.250.129.61/cj7/cjhome.htm

 

I recognized your name from my off road list I believe. Have we met up
on a run yet?

I am not too mobile right now. I can't physically drive the Cherokee
yet, don't fit in the seat and the CJ needs work before I can take it
much farther than the corner store or the doctors. The tie rod broke, I
got it cobbled it back together, but the alignment is way off. Norm has
a tie rod for me as soon as he gets back from vacation. He's going to
put it on then too.

That will be in a couple weeks by the looks of it. I would still be
open to you coming by here.

Mike

Johnathan Marrin wrote:
>
> Mike,
>
> I'm in Whitby and I had a little engine fire not too long ago and she just
> hasn't worked right since. Up the street from me there is both a beer store
> and a butcher which sells great 1.5 pound steaks. I'd love a hand one
> weekend in bypassing the computer and double checking the vacuum lines.
>
> Jay
> 84 CJ7
> 33x12.5 MTR's
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3F26F4C6.EF195D8A@sympatico.ca...
> > Where in Ontario are you?
> >
> > If you are close to TO, I am just stuck home here for the summer bored
> > half out of my skull due to being a passenger in a car accident, can't
> > help mush with the physical work, but can sure point if you need a hand.
> >
> > Helped Steve Seppala from this group and a friend of his do a
> > driveshaft, tie rod end, front end alignment, route the emissions
> > plumbing right, and put a carb kit in his friend's 82 a week ago. They
> > brought the beer and BBQ and I brought my brains, moral support, tools
> > and mouth... ;-)
> >
> > I am pretty good at 'tweaking' carbs and routing emissions plumbing
> > properly. The ones I have personally set up with the computer dump have
> > even passed emissions.
> >
> > Oh, I just noticed you have an 81, you have no computer to mess with and
> > a carb that is 'easy' to set up, Bonus!
> >
> > Ignore the 'Nutter' stuff.
> >
> > There also is a bunch of us from this newsgroup that go out on deep bush
> > runs in the Bancroft area two or three or more times a year. 'Family'
> > style vacation trips usually with wives and kids of all ages along.
> > Crown land camping with nice beaches and fishing.
> >
> > One trip is planned for the first week in Sept. including the long
> > weekend as a finish. Some folks come for the first weekend, some the
> > whole 10 days and some just for the long weekend.
> >
> > I am just going to be a beach bum and 'maybe' be able to canoe and fish
> > this year, can't off road.
> >
> > If you are interested, email me for more details.
> >
> > Here is a link to the last two summers runs in the same place:
> >
> > Aug/02 http://www.imagestation.com/album/?id=4291402603
> >
> > Aug/01 http://www.imagestation.com/album/?id=4292076845
> >
> > Mike
> >
> > "Cannon (O|||||||O)" wrote:
> > >
> > > Many thanks guys! I will let you know how it goes.
> > >
> > > --
> > > Cannon
> > > '81 258 CJ7
> > > 92 Burb
> > > 02 Burb
> > >
> > > http://209.250.129.61/cj7/cjhome.htm
> > >
> > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > news:3F26A948.4C3A133F@sympatico.ca...
> > > > Canadian Tire sells kits for the carb, about $20.00.
> > > >
> > > > They need a kit every couple years or every major tune-up.
> > > >
> > > > The kit comes with good setup directions.
> > > >
> > > > The carb has these idle tubes inside with crimped ends that physically
> > > > clog up. Carb cleaner won't clean them, they need to be physically
> > > > reamed out.
> > > >
> > > > If these idle tubes are even slightly clogged, the carb mix will
> 'never'
> > > > set stable. It will be different every time you start it up. Here is
> a
> > > > link on the idle tubes:
> > > >
> > > > http://www.off-road.com/jeep/tech/engine/carter.html
> > > >
> > > > Here is a link on putting the computer out of your misery:
> > > >
> > > > http://home.sprynet.com/~dale02/ignmods.htm
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > >
> > > > "Cannon (O|||||||O)" wrote:
> > > > >
> > > > > Hi all....
> > > > >
> > > > > I am in the midst of getting my 81 CJ7 on the road. The fuel pump
> has
> > > been
> > > > > replaced and I now have to set up the carb. I once saw a link to a
> > > document
> > > > > regarding the set-up of the carb. Can anyone help here?
> > > > >
> > > > > Also I want to by-pass the computer emission control junk
> completely.
> > > Does
> > > > > anyone have any info on this. In Ontario where I live, vehicles over
> 20
> > > > > years do not need to have an emissions test, so removing the
> associated
> > > > > equipment is not a problem.
> > > > >
> > > > > Please let me know.
> > > > >
> > > > > Many thanks in advance.
> > > > >
> > > > > --
> > > > > Cannon
> > > > > '81 258 CJ7
> > > > > 92 Burb
> > > > > 02 Burb
> > > > >
> > > > > http://209.250.129.61/cj7/cjhome.htm

 

No we haven't went on a run yet. After the engine fire it sat around for
awhile before I had the time to rewire everything. Every time I'd get an
email about a run, there was some problem with the truck or I was away on
business. I don't know if you are in the area but I figured you were from
where you were going on the runs. I saw a Jeep that matches the description
of yours to a "T" down at a plant in south Whitby and I've always wondered
if it was yours. If you are in Durham it would be great to hook up and have
you critique the rust on my truck. :) I can bring the beer and some
steaks. If this sounds feasible for maybe this weekend email me and we'll
set something up.

Jay

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F2999C8.E0DFA503@sympatico.ca...
> I recognized your name from my off road list I believe. Have we met up
> on a run yet?
>
> I am not too mobile right now. I can't physically drive the Cherokee
> yet, don't fit in the seat and the CJ needs work before I can take it
> much farther than the corner store or the doctors. The tie rod broke, I
> got it cobbled it back together, but the alignment is way off. Norm has
> a tie rod for me as soon as he gets back from vacation. He's going to
> put it on then too.
>
> That will be in a couple weeks by the looks of it. I would still be
> open to you coming by here.
>
> Mike
>
> Johnathan Marrin wrote:
> >
> > Mike,
> >
> > I'm in Whitby and I had a little engine fire not too long ago and she
just
> > hasn't worked right since. Up the street from me there is both a beer
store
> > and a butcher which sells great 1.5 pound steaks. I'd love a hand one
> > weekend in bypassing the computer and double checking the vacuum lines.
> >
> > Jay
> > 84 CJ7
> > 33x12.5 MTR's
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:3F26F4C6.EF195D8A@sympatico.ca...
> > > Where in Ontario are you?
> > >
> > > If you are close to TO, I am just stuck home here for the summer bored
> > > half out of my skull due to being a passenger in a car accident, can't
> > > help mush with the physical work, but can sure point if you need a
hand.
> > >
> > > Helped Steve Seppala from this group and a friend of his do a
> > > driveshaft, tie rod end, front end alignment, route the emissions
> > > plumbing right, and put a carb kit in his friend's 82 a week ago.
They
> > > brought the beer and BBQ and I brought my brains, moral support, tools
> > > and mouth... ;-)
> > >
> > > I am pretty good at 'tweaking' carbs and routing emissions plumbing
> > > properly. The ones I have personally set up with the computer dump
have
> > > even passed emissions.
> > >
> > > Oh, I just noticed you have an 81, you have no computer to mess with
and
> > > a carb that is 'easy' to set up, Bonus!
> > >
> > > Ignore the 'Nutter' stuff.
> > >
> > > There also is a bunch of us from this newsgroup that go out on deep
bush
> > > runs in the Bancroft area two or three or more times a year. 'Family'
> > > style vacation trips usually with wives and kids of all ages along.
> > > Crown land camping with nice beaches and fishing.
> > >
> > > One trip is planned for the first week in Sept. including the long
> > > weekend as a finish. Some folks come for the first weekend, some the
> > > whole 10 days and some just for the long weekend.
> > >
> > > I am just going to be a beach bum and 'maybe' be able to canoe and
fish
> > > this year, can't off road.
> > >
> > > If you are interested, email me for more details.
> > >
> > > Here is a link to the last two summers runs in the same place:
> > >
> > > Aug/02 http://www.imagestation.com/album/?id=4291402603
> > >
> > > Aug/01 http://www.imagestation.com/album/?id=4292076845
> > >
> > > Mike
> > >
> > > "Cannon (O|||||||O)" wrote:
> > > >
> > > > Many thanks guys! I will let you know how it goes.
> > > >
> > > > --
> > > > Cannon
> > > > '81 258 CJ7
> > > > 92 Burb
> > > > 02 Burb
> > > >
> > > > http://209.250.129.61/cj7/cjhome.htm
> > > >
> > > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > > news:3F26A948.4C3A133F@sympatico.ca...
> > > > > Canadian Tire sells kits for the carb, about $20.00.
> > > > >
> > > > > They need a kit every couple years or every major tune-up.
> > > > >
> > > > > The kit comes with good setup directions.
> > > > >
> > > > > The carb has these idle tubes inside with crimped ends that
physically
> > > > > clog up. Carb cleaner won't clean them, they need to be
physically
> > > > > reamed out.
> > > > >
> > > > > If these idle tubes are even slightly clogged, the carb mix will
> > 'never'
> > > > > set stable. It will be different every time you start it up.
Here is
> > a
> > > > > link on the idle tubes:
> > > > >
> > > > > http://www.off-road.com/jeep/tech/engine/carter.html
> > > > >
> > > > > Here is a link on putting the computer out of your misery:
> > > > >
> > > > > http://home.sprynet.com/~dale02/ignmods.htm
> > > > >
> > > > > Mike
> > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > 88 Cherokee 235 BFG AT's
> > > > >
> > > > > "Cannon (O|||||||O)" wrote:
> > > > > >
> > > > > > Hi all....
> > > > > >
> > > > > > I am in the midst of getting my 81 CJ7 on the road. The fuel
pump
> > has
> > > > been
> > > > > > replaced and I now have to set up the carb. I once saw a link to
a
> > > > document
> > > > > > regarding the set-up of the carb. Can anyone help here?
> > > > > >
> > > > > > Also I want to by-pass the computer emission control junk
> > completely.
> > > > Does
> > > > > > anyone have any info on this. In Ontario where I live, vehicles
over
> > 20
> > > > > > years do not need to have an emissions test, so removing the
> > associated
> > > > > > equipment is not a problem.
> > > > > >
> > > > > > Please let me know.
> > > > > >
> > > > > > Many thanks in advance.
> > > > > >
> > > > > > --
> > > > > > Cannon
> > > > > > '81 258 CJ7
> > > > > > 92 Burb
> > > > > > 02 Burb
> > > > > >
> > > > > > http://209.250.129.61/cj7/cjhome.htm

 

I am not too far away, I am at Yonge and Finch which is just a hop up
from the 401.

Have a BBQ and a decent place to work in the shade of a tree in my
driveway. (they don't call us 'shade tree' mechanics for nothing eh)
;-) I also have a tarp that hang in the tree nicely too in case we need
more than shade.

I will be around all weekend, have a Doctors appointment Monday morning,
otherwise I am free.

Have you put a kit in the carb recently? If not, you should hit up
Canadian Tire for a kit, they are around $20.00, and a can of carb
cleaner spray. be sure it is carb cleaner, not throttle body cleaner,
they sell both.

The kit takes a couple hours to do right. That is about a half hour of
work, the rest is soaking parts in cleaner. It is not a difficult job.
I normally put on a new fuel filter at the same time, that seems to make
the clean last longer.

To get the carb to tune after killing the computer, a kit is really
needed. The computer can get around a bunch of dirt issues that a
manual setup has trouble with or it makes it harder to set anyway.

I had a computer meltdown here at home and lost my mailing list. My son
thinks it maybe is backed up on a network drive, but he has to configure
a mess of things with his linux box for me to get at it.

There is our annual end of summer RAMJ+W run coming up, I need to make a
mailing list run call real soon.

If you email me your phone number I will give you a call, you are 'just'
long distance and I get free long distance calling with my internet DSL
account.

Mike

Johnathan Marrin wrote:
>
> No we haven't went on a run yet. After the engine fire it sat around for
> awhile before I had the time to rewire everything. Every time I'd get an
> email about a run, there was some problem with the truck or I was away on
> business. I don't know if you are in the area but I figured you were from
> where you were going on the runs. I saw a Jeep that matches the description
> of yours to a "T" down at a plant in south Whitby and I've always wondered
> if it was yours. If you are in Durham it would be great to hook up and have
> you critique the rust on my truck. :) I can bring the beer and some
> steaks. If this sounds feasible for maybe this weekend email me and we'll
> set something up.
>
> Jay
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3F2999C8.E0DFA503@sympatico.ca...
> > I recognized your name from my off road list I believe. Have we met up
> > on a run yet?
> >
> > I am not too mobile right now. I can't physically drive the Cherokee
> > yet, don't fit in the seat and the CJ needs work before I can take it
> > much farther than the corner store or the doctors. The tie rod broke, I
> > got it cobbled it back together, but the alignment is way off. Norm has
> > a tie rod for me as soon as he gets back from vacation. He's going to
> > put it on then too.
> >
> > That will be in a couple weeks by the looks of it. I would still be
> > open to you coming by here.
> >
> > Mike
> >
> > Johnathan Marrin wrote:
> > >
> > > Mike,
> > >
> > > I'm in Whitby and I had a little engine fire not too long ago and she
> just
> > > hasn't worked right since. Up the street from me there is both a beer
> store
> > > and a butcher which sells great 1.5 pound steaks. I'd love a hand one
> > > weekend in bypassing the computer and double checking the vacuum lines.
> > >
> > > Jay
> > > 84 CJ7
> > > 33x12.5 MTR's
> > >
> > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > news:3F26F4C6.EF195D8A@sympatico.ca...
> > > > Where in Ontario are you?
> > > >
> > > > If you are close to TO, I am just stuck home here for the summer bored
> > > > half out of my skull due to being a passenger in a car accident, can't
> > > > help mush with the physical work, but can sure point if you need a
> hand.
> > > >
> > > > Helped Steve Seppala from this group and a friend of his do a
> > > > driveshaft, tie rod end, front end alignment, route the emissions
> > > > plumbing right, and put a carb kit in his friend's 82 a week ago.
> They
> > > > brought the beer and BBQ and I brought my brains, moral support, tools
> > > > and mouth... ;-)
> > > >
> > > > I am pretty good at 'tweaking' carbs and routing emissions plumbing
> > > > properly. The ones I have personally set up with the computer dump
> have
> > > > even passed emissions.
> > > >
> > > > Oh, I just noticed you have an 81, you have no computer to mess with
> and
> > > > a carb that is 'easy' to set up, Bonus!
> > > >
> > > > Ignore the 'Nutter' stuff.
> > > >
> > > > There also is a bunch of us from this newsgroup that go out on deep
> bush
> > > > runs in the Bancroft area two or three or more times a year. 'Family'
> > > > style vacation trips usually with wives and kids of all ages along.
> > > > Crown land camping with nice beaches and fishing.
> > > >
> > > > One trip is planned for the first week in Sept. including the long
> > > > weekend as a finish. Some folks come for the first weekend, some the
> > > > whole 10 days and some just for the long weekend.
> > > >
> > > > I am just going to be a beach bum and 'maybe' be able to canoe and
> fish
> > > > this year, can't off road.
> > > >
> > > > If you are interested, email me for more details.
> > > >
> > > > Here is a link to the last two summers runs in the same place:
> > > >
> > > > Aug/02 http://www.imagestation.com/album/?id=4291402603
> > > >
> > > > Aug/01 http://www.imagestation.com/album/?id=4292076845
> > > >
> > > > Mike
> > > >
> > > > "Cannon (O|||||||O)" wrote:
> > > > >
> > > > > Many thanks guys! I will let you know how it goes.
> > > > >
> > > > > --
> > > > > Cannon
> > > > > '81 258 CJ7
> > > > > 92 Burb
> > > > > 02 Burb
> > > > >
> > > > > http://209.250.129.61/cj7/cjhome.htm
> > > > >
> > > > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > > > news:3F26A948.4C3A133F@sympatico.ca...
> > > > > > Canadian Tire sells kits for the carb, about $20.00.
> > > > > >
> > > > > > They need a kit every couple years or every major tune-up.
> > > > > >
> > > > > > The kit comes with good setup directions.
> > > > > >
> > > > > > The carb has these idle tubes inside with crimped ends that
> physically
> > > > > > clog up. Carb cleaner won't clean them, they need to be
> physically
> > > > > > reamed out.
> > > > > >
> > > > > > If these idle tubes are even slightly clogged, the carb mix will
> > > 'never'
> > > > > > set stable. It will be different every time you start it up.
> Here is
> > > a
> > > > > > link on the idle tubes:
> > > > > >
> > > > > > http://www.off-road.com/jeep/tech/engine/carter.html
> > > > > >
> > > > > > Here is a link on putting the computer out of your misery:
> > > > > >
> > > > > > http://home.sprynet.com/~dale02/ignmods.htm
> > > > > >
> > > > > > Mike
> > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > 88 Cherokee 235 BFG AT's
> > > > > >
> > > > > > "Cannon (O|||||||O)" wrote:
> > > > > > >
> > > > > > > Hi all....
> > > > > > >
> > > > > > > I am in the midst of getting my 81 CJ7 on the road. The fuel
> pump
> > > has
> > > > > been
> > > > > > > replaced and I now have to set up the carb. I once saw a link to
> a
> > > > > document
> > > > > > > regarding the set-up of the carb. Can anyone help here?
> > > > > > >
> > > > > > > Also I want to by-pass the computer emission control junk
> > > completely.
> > > > > Does
> > > > > > > anyone have any info on this. In Ontario where I live, vehicles
> over
> > > 20
> > > > > > > years do not need to have an emissions test, so removing the
> > > associated
> > > > > > > equipment is not a problem.
> > > > > > >
> > > > > > > Please let me know.
> > > > > > >
> > > > > > > Many thanks in advance.
> > > > > > >
> > > > > > > --
> > > > > > > Cannon
> > > > > > > '81 258 CJ7
> > > > > > > 92 Burb
> > > > > > > 02 Burb
> > > > > > >
> > > > > > > http://209.250.129.61/cj7/cjhome.htm