03 tj sport, 4.0L

there is a rubber boot that goes between the 2 pieces of the front
driveshaft. I tore mine off getting stuck on some logs.

Anyplace I can get one, besides the dealer? Also, what kind of grease do I
pack in there?

thanks, matt

--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.

 

In article <bji23u$jcupg$1@ID-190695.news.uni-berlin.de>, "Paul Brogren"
<pibrogren@msn.com> writes:

>Anyplace I can get one, besides the dealer? Also, what kind of grease do I
>pack in there?
>
>thanks, matt

They are not that much at the dealer. Make sure you get the front one, not the
rear one. Parts guys sometimes can't read.

Bad news is you have to take the driveshaft off the front piniom to replace it
but it isn't too difficult. Just use some standard multipurpose grease. Would
be a good idea to clean the splines as well.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html

 

In article <bji23u$jcupg$1@ID-190695.news.uni-berlin.de>, "Paul Brogren"
<pibrogren@msn.com> writes:

>Anyplace I can get one, besides the dealer? Also, what kind of grease do I
>pack in there?
>
>thanks, matt

They are not that much at the dealer. Make sure you get the front one, not the
rear one. Parts guys sometimes can't read.

Bad news is you have to take the driveshaft off the front piniom to replace it
but it isn't too difficult. Just use some standard multipurpose grease. Would
be a good idea to clean the splines as well.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html

 

"Matt Macchiarolo" <mlmacchia@aol.comspambgon> wrote in message
news:20030908210205.29660.00000531@mb-m24.aol.com...
> In article <bji23u$jcupg$1@ID-190695.news.uni-berlin.de>, "Paul Brogren"
> <pibrogren@msn.com> writes:
>
> >Anyplace I can get one, besides the dealer? Also, what kind of grease do
I
> >pack in there?
> >
> >thanks, matt
>
> They are not that much at the dealer. Make sure you get the front one, not
the
> rear one. Parts guys sometimes can't read.
>
> Bad news is you have to take the driveshaft off the front piniom to
replace it
> but it isn't too difficult. Just use some standard multipurpose grease.
Would
> be a good idea to clean the splines as well.

Match-mark it so it goes back with the same orientation... keeps what
balance you have.
__
Steve
..

 

"Matt Macchiarolo" <mlmacchia@aol.comspambgon> wrote in message
news:20030908210205.29660.00000531@mb-m24.aol.com...
> In article <bji23u$jcupg$1@ID-190695.news.uni-berlin.de>, "Paul Brogren"
> <pibrogren@msn.com> writes:
>
> >Anyplace I can get one, besides the dealer? Also, what kind of grease do
I
> >pack in there?
> >
> >thanks, matt
>
> They are not that much at the dealer. Make sure you get the front one, not
the
> rear one. Parts guys sometimes can't read.
>
> Bad news is you have to take the driveshaft off the front piniom to
replace it
> but it isn't too difficult. Just use some standard multipurpose grease.
Would
> be a good idea to clean the splines as well.

Match-mark it so it goes back with the same orientation... keeps what
balance you have.
__
Steve
..

 

In article <3ta7b.247$Zy3.15@newssvr23.news.prodigy.com>, "Steve Cowell"
<scowell@sbcglobal.net> writes:

>Match-mark it so it goes back with the same orientation... keeps what
>balance you have.
>__
>Steve

Whoops, forgot that point, thanks Steve.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html

 

In article <3ta7b.247$Zy3.15@newssvr23.news.prodigy.com>, "Steve Cowell"
<scowell@sbcglobal.net> writes:

>Match-mark it so it goes back with the same orientation... keeps what
>balance you have.
>__
>Steve

Whoops, forgot that point, thanks Steve.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html