Anyone done the valve seals on their 4.7?
04-07-2009 | 09:44 PM
#1
Thread Starter
Member
Joined: Mar 2009
Posts: 40
From: Vancouver B.C
Anyone done the valve seals on their 4.7?
Mines blowing a bit of blue and uses about 2 litres or so of oil between oil changes. Just wondering if it seems to be a common problem with this engine and if anyones changed the valve seals and how difficult it was? I've never had an OHC engine apart before but I've done complete rebuilds on pushrod engines. I'm not very impressed since my heep only has 124k on it. :(
04-08-2009 | 01:34 AM
#2
Senior Member
Joined: Nov 2008
Posts: 1,216
From: Somewhere between NE and SW Alberta
Re: Anyone done the valve seals on their 4.7?
Sounds like it may have been abused by a past owner. My 02 had over 250,000 km on it and never burnt any oil.
Are you sure it's the valve seals and maybe not a bit of oil getting pushed past the rings?
Dan
Are you sure it's the valve seals and maybe not a bit of oil getting pushed past the rings?
Dan
Thread
Thread Starter
Forum
Replies
Last Post
Simon Juncal
Jeep Mailing List
18
01-16-2006 09:40 PM
Simon Juncal
Jeep Mailing List
0
01-02-2006 11:45 PM
William Oliveri
Jeep Mailing List
39
01-26-2004 12:17 PM
William Oliveri
Jeep Mailing List
0
09-15-2003 11:19 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)